[Kenzo]

hey finally im done with a few mods not many pics yet but post yours and your mod list!!!!

2000 V6 Mustang
- custom side mirrors
- custom front bumper
- custom cobra wheels
- CUSTOM Paint Job
- cold air intake
- Full underbody neons (12 colors)
- Full Interior neons (8 colors)
- pioneer deck with full ipod capa.
- 10" JBL sub
- 1,200 WATTS of power
- limo tint
- Headlights (black)

[Juggalo_X]

should have put less money into the ricer mods (lights and shit) and more into the engine and performance of the car.

[Onemanzu]

next is dual exhaust!!

what year cobra are those off??

and how long will it take till this gets moved??

[97TunedMustang]

sure lets do one of these again :p

1997 V6 Mustang



+++Performance+++
++Brand New Engine, New block
++Forged H-beam Rods
++Wiseco Pistons
++Forged Crank
++New heads
++Stiffer valve springs
++new brackets, pulleys, assys, etc
++Everything is either new or aftermarket in it
-Vortech V2 S-trim Supercharger (16 psi)
-Vortech high pressure fuel pump
-Vortech fuel pressure regulator
-42lb Ford Racing injectors
-AEM Wideband 6 in 1 UEGO gauge
-Ford lightning 90mm Maf
-SCT Xcalibrator 2 Tuned by Lasota Racing
-Automatic to T5 Tremec 5 Speed Transmission
-2.87 ASP S/C pulley
-V8's 4.6L Radiator
-MSD 8.5mm SuperConductor Ignition wires
-MAC Ceramicoated Longtube Headers
-MAC Offroad H-Pipe
-Mac 2.5" Catback with 3" stainless steel tips.
-K@N cold air filter charger kit
-Lightweight Aluminum Driveshaft

+++Exterior+++
-10000K GP Thunder HID Kit
-8000k HID kit for Fogs
-GT Fogs with brackets
-Vertical Doors conversion
-Clear Headlights and Clear Corners
-Ugly Taillights
-Decal kit from decalkits.com
-Yellow painted calipers
-Yellow Accents inside
-Accent Convoluted Engine Tubing
-Autometer Boost Pressure Gauge
-18" Xirim Racing rims
-245/40/ZR18 Nitto Neo Gens
-Steeda drop springs
-"Supercharged" emblem from Cobalt SS
-"SCT" emblem
-1.5" Billet aluminum rear wheel spacers

+++Interior+++
-Viper 791XV Remote Start
-Jensen 7" VM9510 In-Dash DVD player
-Black Sunvisors w/ 8" TFT Monitors
-A-pillar 2 Gauge Pod
-Autometer Cobalt Boost Pressure Gauge
-Indiglo white face reverse indiglo gauges
-Hifonics Brutus BX1200D 1200rms Class D Mono
-200 Amp Resettable Fuse Breaker for amplifier
-2 Kicker 12" CVR's , 1 Farad Cap


And i know this is for the stang but i wany my other pride and joy in here too

1991 Honda Civic Si Hatch



So far i've done...
-new distributor
-new alternator
-CAI
-Front and rear strut tower bars
-4-2-1 stainless steel headers
-6000k Hid kit for lows
-pioneer deh-3900mp deck
-Sony 6.5's in back and Pioneer 6.5"s in front
-painted engine parts black night metallic (valve cover, radiator brackets, washer fluid cap, resistor box, driver side engine mount.
-Painted interior parts to match body color
-2000 Civic Si rims with new 195/45/15 dunlop tires


Next..
-mini me swap to d16y8 vtec head (very soon, waitin on some parts to come in from honda dealer)

By next summer... B18 Swap

[Onemanzu]

ha ha ... ill list my mods but i don't have any pictures...

1997 Mustang V6
- K&N Filter
- Under Drive Pulleys
- Kumho ectsa ASX
- Black Crystal Headlights

Exhaust is in the mail!! woot!!

1981 VW Rabbit!! (hopefully)
will get pics up in a few days if i purchase it but its a beast... gots so much potential!!

[Avaric3]

right now i have this stuff installed:
-mac lt headers
-mac o/r h-pipe
-mac catback
-egr deleted
-asp 25% udp
-3d cai
-diablosport predator tune

this stuff is chilling out in my garage waiting to go on:
-screamin demon coil pack w/ livewires
-frpp 4.10 gears
-frpp limited slip diff
-frpp c-springs

soon to be ordered:
-220/220 @ .550 camshaft
-ported and polished upper intake
-ported and polished lower intake
-3000 rpm torque converter
-mt 275/50r15 drag radials for the rear
-tokico rear gas shocks and struts


after i order that stuff in a few days, itll just be a matter of when i have the money to install it all lol

[Onemanzu]

ha ha thats doesn't kill you to have stuff just sitting around??

[tsp_2177]

stock 06 pony package

mods
$30 in neons for under the dash lol
need more money to get duals and a cai




nothin special now but im planning on gettin it pretty fast in the future

[Avaric3]

Originally Posted by Onemanzu ha ha thats doesn't kill you to have stuff just sitting around??

no, its a better feeling than not having it at all i guess lol. its not bad cuz i know that i already have it and its gonna go on eventually. looking online at stuff you want to buy to put on your car is almost like a fantasy but once you see the parts and stuff, you know thats its really gonna happen.

honestly tho, if i could go back, i wouldve not bought any bolt ons that i bought already and just put a huge turbo on lol. id have way more hp that way still

[chevy_killer]

Originally Posted by Avaric3 right now i have this stuff installed: -mac lt headers -mac o/r h-pipe -mac catback -egr deleted -asp 25% udp -3d cai -diablosport predator tune this stuff is chilling out in my garage waiting to go on: -screamin demon coil pack w/ livewires -frpp 4.10 gears -frpp limited slip diff -frpp c-springs soon to be ordered: -220/220 @ .550 camshaft -ported and polished upper intake -ported and polished lower intake -3000 rpm torque converter -mt 275/50r15 drag radials for the rear -tokico rear gas shocks and struts after i order that stuff in a few days, itll just be a matter of when i have the money to install it all lol

wouldnt the 3000 rpm torque converter be a little much for your car????

[Nick_Rapitis]

hey kenzo, a grille delete and a chinspoiler would look really nice on your car! and the paint is nice, how much did that run you?

[Avaric3]

Originally Posted by chevy_killer wouldnt the 3000 rpm torque converter be a little much for your car????

its a pretty decent size cam for a stock cube engine so i think 3k is good.

[blown96stang]

96 v6

8.8 rear end
full GT front suspension
GT K-frame
custom CAI
cat-back exhaust
17MSR racing rims
custom rear seat delete
projector headlights
2 12 inch memphis subs
500 watt memphis amp
aftermarket paint not stock ford purple
steeda spoiler

check my garage for more pics
come watch me drift in Lexington Ky

[tomzac]

2002 v6

EXTERIOR
ROH Snyper 17" rims
Custom Sequential Turn signals
GT hood scoop
MachI chin
Custom side skirts
25mm wheel spacers (rear only)
Big whole in hood

INTERIOR
Triple A pillar gauge pod
Autometer Phantom Fuel pressure gauge
Autometer Phantom 30Vac/20psi gauge
Ford Racing leather shift knob

PERFORMANCE (all done with in the last year starting at the fuel pump)
GT rear stabilizer bar
25% Underdrive Crank Pulley
Steeda Short-throw shifter
Ford Racing "C" Springs (modified)
GT take-off exhaust
Custom CAI 4" tubed front draft from foglight cutout
K&N Air Filter
Focus 310lph fuel pump
Modified BMW upper rad hose
EGR delete
UPR 90mm Idler Pulley
Modified 99 Lower intake
180 Degree Thermostat
Custom Aluminum Upper intake
Cobra 39# fuel injectors
Modified splitport fuelrail
Motor mount modifications
Cobra Eaton M112 Supercharger, inlet and throttle body
Stock Cobra pulley (3.55")
Gates 113" Serpetine Belt
90mm Lightning MAF
Autolite copper spark plugs
180* degree thermostat and altered fan temps
PCV Catch can
A boat load of coolant/vaccum/fuel line and bracket mods
SCT Pro Racers Package (Xcal2 flasher tuner and LC-1 wideband)
245/45/17 General ultra high performance tires
Aluminum driveshaft
8.8 Axle Assembly
DTS Differential Girdle
MMS Lower Control Arms
Spec Aluminum Flywheel
Spec Stage2+ 10.5 GT clutch
Steeda Quadrant and Firewall cable adjuster
Driveshaft loop (Whoops, still sitting on workbench)

Wasn't there a thread like this last month?

[Regency 2007]

Dang tomzac, thats alot of mods!

[Nick_Rapitis]

i want a mod list like that!

[232stang]

*Exterior*
Mach 1 chin spoiler
Mach 1 Grill Delete
Cobra Headlights
17" Anthracite Bullitt wheels 245/45/17
3.8 Emblems, switching to 232 emblems soon
20% tinted tail lights

*Performance*
CAI
Pype offroad X-Pipe (waiting to put on because i need a gt catback)

*Future mods*
dual exhaust with stock gt catback
Lowering it 2 inches
8.8 rearend swap with 3.73's
deepdish anthracite bullitt wheels in the back with maybe 275's or larger

[8t6gt]

Ha Ha 232 you didnt blank out you plate im stealing your identity now

[232stang]

lol dont know what you would do with it... i dont even have a credit card.

[8t6gt]

Nothing its just everyone goes thru the steps to take the picture to paint and draw over the plate when nobody can really do anything with it anyway