tools...which ones?

VSR13 · November 7th, 2007, 04:41 PM

well my parents just got divorced recently so my dad took his tools...i'm looking to start building my own tool collection so i can work on my car. what are some tools that ya'll use?... aside from the basics

AtlanticBlue99 · November 7th, 2007, 04:48 PM

get an impact gun and socket kit. makes a lot of things go quicker. and other tools - well, as the job comes up, new tools may be needed.

what kind of work do you plan on doing?

VSR13 · November 7th, 2007, 04:56 PM

i plan on replacing the headers, new suspension...basically just looking for things to make installs a lil easier.

so wat you think of
-air tool set
-air compressor (obviously)
-jack and jack stands
-basic tool set...dirll, bits, sockets (deep also)
-i'm thinking of a cherry picker for when i install the s/c in spring
-rolling chair and board(so i can work under the car)

that's all i got so far

1FastFox · November 7th, 2007, 05:29 PM

I hope you realize that the list you have otgether there is about 2k worth of tools minus the air compressor... I do have some impacts that Im selling if your interested they are a IR titanium 1/2 drive a Mac 3/8 drive and a snap-on die grinder...

Juggalo_X · November 7th, 2007, 05:38 PM

Im happy today i bought an 02 sensor socket and a new pair of impact resistant work cloves

homebrewed · November 7th, 2007, 05:44 PM

Originally Posted by Juggalo_X

Im happy today i bought an 02 sensor socket and a new pair of impact resistant work cloves

Whats a work clove?

And as for you, VSR, all you need to work on your Ford is the official Ford Tool:

WilltheThrill · November 7th, 2007, 05:46 PM

look bro, heres the only tool u will need............a check/debit card to swipe @ the racing shop

that is if youre rich and lazy!

homebrewed · November 7th, 2007, 05:54 PM

Originally Posted by WilltheThrill

look bro, heres the only tool u will need............a check/debit card to swipe @ the racing shop

that is if youre rich and lazy!

And in your world, we all drive Fobras

GTFO Will. unless you are gonna share some $$$ w/ HB :wink

vfast · November 7th, 2007, 06:14 PM

you can start off with some cheap tools ... do you have a Harbour Freight near you? then replace with quality tools as they break and you have more $$$$$

zers · November 7th, 2007, 06:20 PM

Don't forget the torque wrench.

WilltheThrill · November 7th, 2007, 06:22 PM

Originally Posted by homebrewed

Originally Posted by WilltheThrill

look bro, heres the only tool u will need............a check/debit card to swipe @ the racing shop

that is if youre rich and lazy!

And in your world, we all drive Fobras

GTFO Will. unless you are gonna share some $$$ w/ HB :wink

lol, i cant do that shit. im in too much debt. i'll put in my own mods as long as im sure i can do them myself with whats available at the auto hobby shop on base

VSR13 · November 7th, 2007, 06:42 PM

Originally Posted by 1FastFox

I hope you realize that the list you have otgether there is about 2k worth of tools minus the air compressor... I do have some impacts that Im selling if your interested they are a IR titanium 1/2 drive a Mac 3/8 drive and a snap-on die grinder...

2K...are you serious? where are you shopping? i've been pricing this stuff since i've been at wk(ungodly slow today) and i've come to maybe 1K total

VSR13 · November 7th, 2007, 06:44 PM

Originally Posted by WilltheThrill

look bro, heres the only tool u will need............a check/debit card to swipe @ the racing shop

that is if youre rich and lazy!

lol sounds like my ex gf's dad. he has a jacked up H2 with huge ass tires...rims and tires alone cost 1400 a piece. good thing i'm still friends with her parents...o and her mom is extremely hot!! i'll see if i can get a pic

TurboLX · November 7th, 2007, 07:21 PM

all of them

VSR13 · November 7th, 2007, 07:24 PM

Originally Posted by TurboLX

all of them

wat u mean by all of them?

WAR-PARTY · November 7th, 2007, 08:53 PM

Ihave a lot of Snap On tools thanks to my father, but Sears tools aren't bad and when ya break them the just give you a new one. The 96 pice kit is a good starter. Feel bad for ya, good luck!

November 7th, 2007, 04:41 PM	#1
VSR13 Enthusiast Join Date: Feb 2007 Location: Houston, Texas Posts: 503 iTrader: 0 reviews	tools...which ones? well my parents just got divorced recently so my dad took his tools...i'm looking to start building my own tool collection so i can work on my car. what are some tools that ya'll use?... aside from the basics

November 7th, 2007, 04:48 PM	#2
AtlanticBlue99 I Post Entirely Way Too Much 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: University of Georgia Posts: 8,859 Blog Entries: 1 iTrader: 0 reviews	get an impact gun and socket kit. makes a lot of things go quicker. and other tools - well, as the job comes up, new tools may be needed. what kind of work do you plan on doing? __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

November 7th, 2007, 05:29 PM	#4
1FastFox Skirt Chasing Philanderer Kit Car/Ducati/Explorer Nike Fast Join Date: Mar 2007 Location: Indiana Posts: 8,977 iTrader: 4 reviews	I hope you realize that the list you have otgether there is about 2k worth of tools minus the air compressor... I do have some impacts that Im selling if your interested they are a IR titanium 1/2 drive a Mac 3/8 drive and a snap-on die grinder... __________________ Might want to consider writing down what is said above, it will help you at some point or another in your life!

November 7th, 2007, 06:14 PM	#9
vfast Banned Join Date: Aug 2005 Location: shimmy shack takeout Posts: 1,092 iTrader: 0 reviews	you can start off with some cheap tools ... do you have a Harbour Freight near you? then replace with quality tools as they break and you have more $$$$$ __________________ EVERYONE IS ENTITLED TO MY OPINION:cool: 6'ers are for kids 1965 chevelle SS 421 sbc 6 speed, 3.90 gears,alum d-shaft, brodix heads,roller cam,925 AED carb...grocery getter[COLOR="Red"]RIP[/COLOR]

November 7th, 2007, 06:20 PM	#10
zers Regular 1965 Coupe Join Date: Oct 2007 Location: Oregon Posts: 356 iTrader: 0 reviews	Don't forget the torque wrench. __________________

November 7th, 2007, 04:56 PM	#3
VSR13 Enthusiast Join Date: Feb 2007 Location: Houston, Texas Posts: 503 iTrader: 0 reviews	i plan on replacing the headers, new suspension...basically just looking for things to make installs a lil easier. so wat you think of -air tool set -air compressor (obviously) -jack and jack stands -basic tool set...dirll, bits, sockets (deep also) -i'm thinking of a cherry picker for when i install the s/c in spring -rolling chair and board(so i can work under the car) that's all i got so far

November 7th, 2007, 05:38 PM	#5
Juggalo_X I Post Entirely Way Too Much 2001 Mustang 232/CBR600 14+@Slow Join Date: Jan 2007 Location: South Western Ontario Posts: 6,688 iTrader: 0 reviews	Im happy today i bought an 02 sensor socket and a new pair of impact resistant work cloves

November 7th, 2007, 07:21 PM	#14
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,792 Blog Entries: 1 iTrader: 0 reviews	all of them __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

November 7th, 2007, 08:53 PM	#16
WAR-PARTY Hardcore Enthusiast 2001 YUGO GT Join Date: Aug 2006 Location: GOAT LOCKER PENSACOLA FL Posts: 1,701 Blog Entries: 1 iTrader: 0 reviews	Ihave a lot of Snap On tools thanks to my father, but Sears tools aren't bad and when ya break them the just give you a new one. The 96 pice kit is a good starter. Feel bad for ya, good luck! __________________ How I met my wife! Our first date...

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: tools...which ones?
Thread	Thread Starter	Forum	Replies	Last Post
Facts, tips, and other tools for dragracing	99mustang232	Drag	11	December 25th, 2009 07:50 AM
393 stroker buil tools?	86ttops	5.0 Mustangs	0	September 13th, 2007 01:53 AM
Tools for modding	RandoGT	96-98	3	July 31st, 2007 11:24 AM
tools	bittydrew	99-04	2	December 24th, 2006 03:13 AM
engine building tools	99mustang232	The Clubhouse	3	January 26th, 2006 01:20 AM

All times are GMT -4. The time now is 07:17 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.