Thanks Again Sweet and Doc

Mach Boy · March 16th, 2008, 01:52 AM

I just wanted to say thanks again to Sweet and Doc for doing all the work they did to my car this weekend. I drove down to Arkansas from STL on Friday. Sweet did a P&P on my intake and throttle body. Doc, for the most part, put on my front C springs by himself. We did some datalogging on my car to see what was up with my check engine light, but after the P&P and a clear DTC, the light never came back on. We destroyed 2 of our 3 cars at one point or another (I came out clean), but we won't talk about my wheel almost falling off. And lastly, we did a few races before I left. Unfortunately, Doc now gets to build a new 5spd (manually shifting the auto lol).

I had a great time and it was a good drive to and from there. Let me know when you guys come up to Gateway.

SWEET2KSTANG · March 16th, 2008, 01:58 AM

your welcome, thanks for comming down. had a great time besides the little bit of destruction we did on our cars. dont know when we will head that way since there are 2 cars that are planning for some major mods

but will definatly let you know.

Mach Boy · March 16th, 2008, 02:01 AM

Let me see if I can get that picture of you running away from the camera up...

SWEET2KSTANG · March 16th, 2008, 02:05 AM

thanks, now everyone will have something to give me shit about.

mpboy · March 16th, 2008, 02:08 AM

im not to far from stl, im in KC

SWEET2KSTANG · March 16th, 2008, 02:12 AM

about the same distance to stl or here, maybe a hair longer to stl. you should join up with us for a track day or something. me and doc both will be heading that way soon for some dyno time.

mpboy · March 16th, 2008, 02:15 AM

Originally Posted by SWEET2KSTANG

about the same distance to stl or here, maybe a hair longer to stl. you should join up with us for a track day or something. me and doc both will be heading that way soon for some dyno time.

yea i should have my rebuild done in about a day or 2.. im just having probs sliding the fucking tranny in and its been cold. but after i get about 1000miles on the motor i wana through it on a dyno and see what my #'s are, but iv never done dyno work so u guys will have to take it easy on me

SWEET2KSTANG · March 16th, 2008, 02:17 AM

we are about to make a trip to the track soon, then my tear down begins. i dont know what all doc is going to do with his mach, but we both are going there to dyno tune our cars. i was talking to supertune performance up there, and think thats where we are going to go have our flip chips done at.

Mach Boy · March 16th, 2008, 03:03 AM

Here are some pictures.

SWEET2KSTANG · March 16th, 2008, 03:15 AM

throttle body and hat too:

Mach Boy · March 16th, 2008, 12:20 PM

I made a call to a buddy this morning with a V6 and a Stalker kit and told him about the springs. Man those things sold faster than I thought.

HMUSN · March 16th, 2008, 03:14 PM

No problem bro...
ow wait.. wrong Doc

SWEET2KSTANG · March 16th, 2008, 06:11 PM

Originally Posted by HMUSN

No problem bro...
ow wait.. wrong Doc

talking bout doc8224

March 16th, 2008, 01:52 AM	#1
Mach Boy MM's Orangest 2004 Mach 1 Mustang Join Date: Sep 2007 Location: Indy Posts: 2,846 Blog Entries: 1 iTrader: 1 reviews	Thanks Again Sweet and Doc I just wanted to say thanks again to Sweet and Doc for doing all the work they did to my car this weekend. I drove down to Arkansas from STL on Friday. Sweet did a P&P on my intake and throttle body. Doc, for the most part, put on my front C springs by himself. We did some datalogging on my car to see what was up with my check engine light, but after the P&P and a clear DTC, the light never came back on. We destroyed 2 of our 3 cars at one point or another (I came out clean), but we won't talk about my wheel almost falling off. And lastly, we did a few races before I left. Unfortunately, Doc now gets to build a new 5spd (manually shifting the auto lol). I had a great time and it was a good drive to and from there. Let me know when you guys come up to Gateway. __________________ Looking for 03/04 4V ABS Wiring Harness Connector/Incomplete Wiring Harness (with ABS connector)

March 16th, 2008, 01:58 AM	#2
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	your welcome, thanks for comming down. had a great time besides the little bit of destruction we did on our cars. dont know when we will head that way since there are 2 cars that are planning for some major mods but will definatly let you know. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

March 16th, 2008, 02:01 AM	#3
Mach Boy MM's Orangest 2004 Mach 1 Mustang Join Date: Sep 2007 Location: Indy Posts: 2,846 Blog Entries: 1 iTrader: 1 reviews	Let me see if I can get that picture of you running away from the camera up... __________________ Looking for 03/04 4V ABS Wiring Harness Connector/Incomplete Wiring Harness (with ABS connector)

March 16th, 2008, 02:05 AM	#4
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	thanks, now everyone will have something to give me shit about. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

March 16th, 2008, 02:12 AM	#6
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	about the same distance to stl or here, maybe a hair longer to stl. you should join up with us for a track day or something. me and doc both will be heading that way soon for some dyno time. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

March 16th, 2008, 02:17 AM	#8
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	we are about to make a trip to the track soon, then my tear down begins. i dont know what all doc is going to do with his mach, but we both are going there to dyno tune our cars. i was talking to supertune performance up there, and think thats where we are going to go have our flip chips done at. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

March 16th, 2008, 03:03 AM	#9
Mach Boy MM's Orangest 2004 Mach 1 Mustang Join Date: Sep 2007 Location: Indy Posts: 2,846 Blog Entries: 1 iTrader: 1 reviews	Here are some pictures. Attached Thumbnails __________________ Looking for 03/04 4V ABS Wiring Harness Connector/Incomplete Wiring Harness (with ABS connector)

March 16th, 2008, 03:15 AM	#10
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	throttle body and hat too: __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

March 16th, 2008, 12:20 PM	#11
Mach Boy MM's Orangest 2004 Mach 1 Mustang Join Date: Sep 2007 Location: Indy Posts: 2,846 Blog Entries: 1 iTrader: 1 reviews	I made a call to a buddy this morning with a V6 and a Stalker kit and told him about the springs. Man those things sold faster than I thought. __________________ Looking for 03/04 4V ABS Wiring Harness Connector/Incomplete Wiring Harness (with ABS connector)

March 16th, 2008, 03:14 PM	#12
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	No problem bro... ow wait.. wrong Doc __________________

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Thanks Again Sweet and Doc
Thread	Thread Starter	Forum	Replies	Last Post
How Sweet Is This....	e3sean	5.0 Mustangs	76	January 28th, 2008 09:09 PM
sweet ass vid	06RedfireGT	The Clubhouse	6	November 22nd, 2007 12:44 PM
Sweet	06GTMustang89	2005 - 2010	2	November 9th, 2007 11:55 AM
Sweet .	Hudstang	96-98	2	October 14th, 2007 12:54 PM
sweet	232stang	The Clubhouse	22	July 12th, 2007 09:04 PM

All times are GMT -4. The time now is 06:27 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.