hello computer nerds . . .

707Stang · June 13th, 2008, 02:10 PM

my buddy here is gonna type his problem:

HP Laptop wont boot, it sits at the HP screen saying Press ESC to change boot order or F10 to enter Setup. if you press f10 it just says please wait forever. if you press esc it just shows some bullshit and doesnt let you change the boot order. Tried removing the memory, tried taking out the processor and applying new thermal grease. tried taking out the cd rom drive, the hard drive, nothing gets it past this screen. What could be wrong? its a ZV5000 Pavilion

graystang01 · June 13th, 2008, 02:11 PM

muffler bearing?

98stangv6 · June 13th, 2008, 02:16 PM

^lol. You could try a system restore... idk?

RavensChild · June 13th, 2008, 02:16 PM

boot in safe mode? Go to DOS and boot from there or change where to boot from?

Safi · June 13th, 2008, 02:17 PM

Can you get it into safe mode? press f8 on boot to get to safe mode. I havn't used a windows computer in a long time, so i dont know if that screen is before or after the safe mode thingy

RavensChild · June 13th, 2008, 02:20 PM

^after

homebrewed · June 13th, 2008, 02:27 PM

dr.gonzo! · June 13th, 2008, 02:28 PM

It sounds like you need to get into the bios to change what device your booting from. You might try to update your bios on cd and see if it will boot from cd auto read. Now that I think of it make sure there is no cd in the drive and try restarting the computer. sometimes if there is a music cd in the drive windows will automatically try to boot from that cd disk and will obviously not work.

Vinyl66 · June 13th, 2008, 02:41 PM

stick it in the microwave for about 15 seconds. it just sounds like it needs to be warmed up computers don't work well on cold starts

gt_andy · June 13th, 2008, 02:45 PM

Normally when a computer will hang at the post screen it is trying to figure out the drives! Install a new HDD and see if it will go past post! Also go into the Bios and check to see if it reconizes the HDD and the CDrom!

JohnnyV · June 13th, 2008, 02:47 PM

Okay if your sittin there hitting ESC and it WONT go into the bios then your screwed that way. If it absolutely will not go past that screen then you definitely have hardware problems.

These are what you can try..

A) Turn it on and just LET IT SIT there and see if it will eventually go past that screen and boot into windows if not..

B) Get your hands on some RAM that is compatible with your laptop and stick it in and try it out (dont forget to remove your stick of RAM first). Does it boot with the different RAM? yes, there ya go your RAM was the problem. Doesn't boot?

C) Get your hands on a different harddrive, stick it in and see if it goes past the boot screen. If so then your old harddrive was bad, get a new harddrive.

Go from there... Its not a "Press F8 to go into safemode" type deal, it wont even go past the boot screen so sitting there and pressing F8 aint gonna do shit.

And if none of those options work, then your motherboard is probably dinked, get a new laptop.

Juggalo_X · June 13th, 2008, 02:51 PM

to add to what my co-worker johnny v suggested. remove your hard drive and see if it boots with out it into the setup. Bad IDE devices can cause a POST hang.

also if your savvy enough you can locate the cmos batter and remove it as well as the main battery let it sit for a few hours then replace both batteries and boot it. see if this helps. this should effectively reset your Cmos to factory defaults.

gt_andy · June 13th, 2008, 02:53 PM

Originally Posted by Juggalo_X

to add to what my co-worker johnny v suggested. remove your hard drive and see if it boots with out it into the setup. Bad IDE devices can cause a POST hang.

also if your savvy enough you can locate the cmos batter and remove it as well as the main battery let it sit for a few hours then replace both batteries and boot it. see if this helps. this should effectively reset your Cmos to factory defaults.

Like i said! BAD IDE DEVICE can cause a hang!

Juggalo_X · June 13th, 2008, 03:11 PM

Originally Posted by gt_andy

Like i said! BAD IDE DEVICE can cause a hang!

yes you did u also told him to go into the bios. when he clearly stated he couldn't get into it

707Stang · June 13th, 2008, 04:05 PM

Originally Posted by Juggalo_X

yes you did u also told him to go into the bios. when he clearly stated he couldn't get into it

one of a few that actually read it.

Juggalo_X · June 13th, 2008, 04:08 PM

Originally Posted by 707Stang

one of a few that actually read it.

i did then i gave you my professional in site on the situation lol

707Stang · June 13th, 2008, 04:18 PM

Originally Posted by Juggalo_X

i did then i gave you my professional in site on the situation lol

yeah now he's tryin the battery thing

Juggalo_X · June 13th, 2008, 04:19 PM

Originally Posted by 707Stang

yeah now he's tryin the battery thing

the cmos battery is tiny some dissasembly may be required.

MustanG_guy17 · June 13th, 2008, 04:23 PM

Change the air filter.

Juggalo_X · June 13th, 2008, 04:25 PM

Originally Posted by MustanG_guy17

Change the air filter.

and the high speed muffler bearing

June 13th, 2008, 02:10 PM	#1
707Stang I'm Hella From NorCal 2008 GTI 14.65 @ 99.83 Join Date: Jan 2007 Location: NorCal Suckas! >;) Posts: 1,160 iTrader: 0 reviews	hello computer nerds . . . my buddy here is gonna type his problem: HP Laptop wont boot, it sits at the HP screen saying Press ESC to change boot order or F10 to enter Setup. if you press f10 it just says please wait forever. if you press esc it just shows some bullshit and doesnt let you change the boot order. Tried removing the memory, tried taking out the processor and applying new thermal grease. tried taking out the cd rom drive, the hard drive, nothing gets it past this screen. What could be wrong? its a ZV5000 Pavilion __________________ The Curse 600 CFM Edelbrock, Hookers, Pertronix billet dizzy, Accel coil, GT40 heads, 5.0 h.o, dynomax exhaust, SSBC, FRPP 9mm wires, tci

June 13th, 2008, 02:16 PM	#3
98stangv6 Hardcore Enthusiast 1998 Mustang V6 SLOW 17.13@80.85 Join Date: Apr 2007 Location: Oklahoma Posts: 1,127 iTrader: 1 reviews	^lol. You could try a system restore... idk? __________________ JAKE'S PIITB CREW MEMBER#4

June 13th, 2008, 02:41 PM	#9
Vinyl66 Anatidaephobic 1966 Vinyl Mustang 2012 Hyundai Elantra GLS Join Date: Sep 2007 Posts: 2,352 iTrader: 0 reviews	stick it in the microwave for about 15 seconds. it just sounds like it needs to be warmed up computers don't work well on cold starts __________________ Pittsburgh Steelers/Penguins/Pirates FTMFW!!!!!

June 13th, 2008, 02:45 PM	#10
gt_andy Regular 2000 Mustang GT 13.10@103 Join Date: Oct 2007 Location: Toledo, OH Posts: 309 iTrader: 0 reviews	Normally when a computer will hang at the post screen it is trying to figure out the drives! Install a new HDD and see if it will go past post! Also go into the Bios and check to see if it reconizes the HDD and the CDrom! __________________ 2000 Ford Mustang GT 5spd (TOY) 1997 Ford Tunderbird LX = Daily Driver

June 13th, 2008, 02:47 PM	#11
JohnnyV Newbie '99 Pontiac Grandprix GTP Low 14's Join Date: Apr 2008 Location: Tillsonburg, Ontario Posts: 6 iTrader: 0 reviews	Okay if your sittin there hitting ESC and it WONT go into the bios then your screwed that way. If it absolutely will not go past that screen then you definitely have hardware problems. These are what you can try.. A) Turn it on and just LET IT SIT there and see if it will eventually go past that screen and boot into windows if not.. B) Get your hands on some RAM that is compatible with your laptop and stick it in and try it out (dont forget to remove your stick of RAM first). Does it boot with the different RAM? yes, there ya go your RAM was the problem. Doesn't boot? C) Get your hands on a different harddrive, stick it in and see if it goes past the boot screen. If so then your old harddrive was bad, get a new harddrive. Go from there... Its not a "Press F8 to go into safemode" type deal, it wont even go past the boot screen so sitting there and pressing F8 aint gonna do shit. And if none of those options work, then your motherboard is probably dinked, get a new laptop. __________________ Juggalo_X Is My Hero AL 104's~Res Delete~Wizaired CAI w/Amsoil Filter~Overkill Tuned PCM~ZZP 2.5" DP w/Magnaflow CAT~U-Bend Delete~Dual Magnaflows~GMPP SB's, STB's & T/A's~KYB GR2's~SSC's~180stat 14.40@97mph

June 13th, 2008, 02:51 PM	#12
Juggalo_X I Post Entirely Way Too Much 2001 Mustang 232/CBR600 14+@Slow Join Date: Jan 2007 Location: South Western Ontario Posts: 6,688 iTrader: 0 reviews	to add to what my co-worker johnny v suggested. remove your hard drive and see if it boots with out it into the setup. Bad IDE devices can cause a POST hang. also if your savvy enough you can locate the cmos batter and remove it as well as the main battery let it sit for a few hours then replace both batteries and boot it. see if this helps. this should effectively reset your Cmos to factory defaults.

June 13th, 2008, 04:23 PM	#19
MustanG_guy17 Hardcore Enthusiast 2007 Mustang GT/CS Join Date: Mar 2007 Location: Milton,Florida Posts: 1,967 iTrader: 0 reviews	Change the air filter. __________________ 2007 Mustang GT/CS 5spd: Flowmaster hushpower axle back,O/R X pipe,JLT CAI,93 Bama tune..laser interceptor dual jammers, Escort Redline RD,Laser Veil G4. MAVERICKS!!!!!!!!!! BABYYYY.. DALLAS COWBOYS

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: hello computer nerds . . .
Thread	Thread Starter	Forum	Replies	Last Post
Transformer Nerds In Here Now...56K NO-NO	ChrisJ	The Clubhouse	95	October 16th, 2008 10:10 AM
video nerds.	RhadCundell	The Clubhouse	7	January 4th, 2008 06:07 PM
Where're my Computer nerds?	G.T. Rags	The Clubhouse	8	December 24th, 2007 04:08 PM
Computer Guys (Nerds)	MSO	The Clubhouse	17	November 30th, 2007 09:40 PM
Computer Nerds Might Like This	ChrisJ	The Clubhouse	71	November 12th, 2007 11:45 AM

All times are GMT -4. The time now is 07:38 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.