The Beast Part 2

zinc02GT · July 9th, 2008, 02:29 PM

HELL YEAH DUDE

thats frucking sweet man. big congrats

MustangMatt96GT · July 10th, 2008, 01:00 AM

Drove her a while today... Dont know how many miles but i would say around 25-40 miles... She is running great. She can lay down rubber still, and seems very strong. Tranny is now grinding a little bit, so i think it may just be low of fluid. Everything is great.

But let me tell ya, UPR coilover kits are sweet... The rebound on the kit is amazing. The car has amazing weight transfer. Lifts the nose of the car like no other and the rear just squats with the Eibach Drag spings... The car is very very low though in front. Ill have pictures later.

I love having my car back again... had some people toying with me ttonight. But i dont have the speed cal hoked up correctly, so i have a few small issues still...

zinc02GT · July 10th, 2008, 01:04 AM

videos of driving not idle or ban!

MustangMatt96GT · July 10th, 2008, 01:06 AM

hahaha...

turns out mom didnt have the camera on when it was driving...

MustangMatt96GT · July 10th, 2008, 11:56 AM

That is the way one of the wheel studs is. I need to tap it towards the center or something to get a lug nut on that one.

But she needs a bath bad and then a few thiings taken care of. The heater core seems to have one of the hoses slightly off and its leaking... But i need to take the water out of her anyway and put in some coolant now too...

But i love being able to drive her again.

Is there anyway to put tranny fluid in the tranny without taking the shifter off? I just am lazy.

I got to clean the garage and teh side of the house now so i can wax her in the garage.

zinc02GT · July 10th, 2008, 12:24 PM

only way to fill the tranny other than taking the shifter off is to fill it from the fill plug under the car...

Id just take the shfiter off...

HBK_2007 · July 10th, 2008, 02:23 PM

cant u fill it threw the dip stick?

MustangMatt96GT · July 10th, 2008, 03:11 PM

Its a maunal.. we dont have dipsticks... so i dont know how much to put in ethierr... but im going to put in about a half quart and call her good.

HBK_2007 · July 10th, 2008, 03:13 PM

oh, thought both of them had dipsticks

zinc02GT · July 10th, 2008, 03:23 PM

how much have you put in there Matt? 3.8 is what I put in my t3650....

MustangMatt96GT · July 10th, 2008, 04:45 PM

I put just about 3 quarts in thinking i didnt get it all drained, but it calls for about 3.4 quarts, so ill put in a half quart and call it good.

Got my Registered Racer numbers on, waxed for the pictures tonight, and she is ready to go.

HBK_2007 · July 10th, 2008, 05:47 PM

awesome

06RedfireGT · July 10th, 2008, 06:04 PM

Glad you got her back on the road.

MustangMatt96GT · July 12th, 2008, 01:08 PM

Just went for a ride too see if I could get the shmmy out of it... Got the shimmy out of it by tightening the lug nuts and the strut bolts...

But anyway i get on her a little bit, and all the sudden its louder than a top fuel car... Turns out my x pipe T bolt fell off and allowe the x pipe to slide off... It was dragging on the street. lucky i was only a few blocks from home. So i tied up the x pipe and now i get to fix it... I cant wait to just run the piss out of the car on Wedsday... I havent done that yet.

MikeD05GT · July 12th, 2008, 01:23 PM

Originally Posted by MustangMatt96GT

Just went for a ride too see if I could get the shmmy out of it... Got the shimmy out of it by tightening the lug nuts and the strut bolts...

But anyway i get on her a little bit, and all the sudden its louder than a top fuel car... Turns out my x pipe T bolt fell off and allowe the x pipe to slide off... It was dragging on the street. lucky i was only a few blocks from home. So i tied up the x pipe and now i get to fix it... I cant wait to just run the piss out of the car on Wedsday... I havent done that yet.

lmao im sorry man but everything bad seems to happen to you

HBK_2007 · July 12th, 2008, 02:42 PM

could be worse, ur wheel coulda fallen off with the bad nut

futureMACH1racer · July 12th, 2008, 04:37 PM

Looks tits bro

MustangMatt96GT · July 13th, 2008, 12:36 AM

exhaust is back on and tighter than before, but i still need to buy 2 new T bolts. But she should be ready for Wedsday with out the nitrious, i may run a 100 shot. But Im going to put in the QA1 K member tommorow after work with my buddy jeff...

Im hoping for a 14.9 but ill be happy just to be back... on nitrous i hope for about what i was runnng before 14.2s-13.8s. We will see.

itschristorres8 · July 13th, 2008, 01:28 AM

if you have a manual there should be a fill plug on the side
just fill til it spills out then plug it. has to be that exact level

good to see her going
i was hoping to have mine done today but i got the rain delay =/
plus my 1 man team doesnt make things go by faster

MustangMatt96GT · July 13th, 2008, 10:06 AM

Yeah ill be doing the tranny fluid later tonight when i do the QA1 k member. I also have to keep flushing the radiator and the block with water and radiator flush, and its slowly becomming less rusty water...

July 9th, 2008, 02:29 PM	#101
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,828 iTrader: 1 reviews	HELL YEAH DUDE thats frucking sweet man. big congrats __________________ Mods in garage. Built suspension and gears since posted times.

July 10th, 2008, 01:00 AM	#102
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	Drove her a while today... Dont know how many miles but i would say around 25-40 miles... She is running great. She can lay down rubber still, and seems very strong. Tranny is now grinding a little bit, so i think it may just be low of fluid. Everything is great. But let me tell ya, UPR coilover kits are sweet... The rebound on the kit is amazing. The car has amazing weight transfer. Lifts the nose of the car like no other and the rear just squats with the Eibach Drag spings... The car is very very low though in front. Ill have pictures later. I love having my car back again... had some people toying with me ttonight. But i dont have the speed cal hoked up correctly, so i have a few small issues still... __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

July 10th, 2008, 01:04 AM	#103
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,828 iTrader: 1 reviews	videos of driving not idle or ban! __________________ Mods in garage. Built suspension and gears since posted times.

July 10th, 2008, 01:06 AM	#104
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	hahaha... turns out mom didnt have the camera on when it was driving... __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

July 10th, 2008, 11:56 AM	#105
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	That is the way one of the wheel studs is. I need to tap it towards the center or something to get a lug nut on that one. But she needs a bath bad and then a few thiings taken care of. The heater core seems to have one of the hoses slightly off and its leaking... But i need to take the water out of her anyway and put in some coolant now too... But i love being able to drive her again. Is there anyway to put tranny fluid in the tranny without taking the shifter off? I just am lazy. I got to clean the garage and teh side of the house now so i can wax her in the garage. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

July 10th, 2008, 12:24 PM	#106
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,828 iTrader: 1 reviews	only way to fill the tranny other than taking the shifter off is to fill it from the fill plug under the car... Id just take the shfiter off... __________________ Mods in garage. Built suspension and gears since posted times.

July 10th, 2008, 02:23 PM	#107
HBK_2007 Genibus Nitito Canus 2009 Ford Mustang GT Join Date: Jan 2008 Location: Wyoming Posts: 2,827 iTrader: 0 reviews	cant u fill it threw the dip stick? __________________ Red 1996 GT: JLT RAI, Steeda Underdrive pullies, Stewart Waterpump; nothing to brag about Black 2009 45th aniverary edition GT 5 speed: K&N CAI, BBK Twin 62mm Throttle Body, BBK Underdrive Pullies, SLP Loudmouth

July 10th, 2008, 03:11 PM	#108
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	Its a maunal.. we dont have dipsticks... so i dont know how much to put in ethierr... but im going to put in about a half quart and call her good. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

July 10th, 2008, 03:13 PM	#109
HBK_2007 Genibus Nitito Canus 2009 Ford Mustang GT Join Date: Jan 2008 Location: Wyoming Posts: 2,827 iTrader: 0 reviews	oh, thought both of them had dipsticks __________________ Red 1996 GT: JLT RAI, Steeda Underdrive pullies, Stewart Waterpump; nothing to brag about Black 2009 45th aniverary edition GT 5 speed: K&N CAI, BBK Twin 62mm Throttle Body, BBK Underdrive Pullies, SLP Loudmouth

July 10th, 2008, 03:23 PM	#110
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,828 iTrader: 1 reviews	how much have you put in there Matt? 3.8 is what I put in my t3650.... __________________ Mods in garage. Built suspension and gears since posted times.

July 10th, 2008, 04:45 PM	#111
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	I put just about 3 quarts in thinking i didnt get it all drained, but it calls for about 3.4 quarts, so ill put in a half quart and call it good. Got my Registered Racer numbers on, waxed for the pictures tonight, and she is ready to go. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

July 10th, 2008, 05:47 PM	#112
HBK_2007 Genibus Nitito Canus 2009 Ford Mustang GT Join Date: Jan 2008 Location: Wyoming Posts: 2,827 iTrader: 0 reviews	awesome __________________ Red 1996 GT: JLT RAI, Steeda Underdrive pullies, Stewart Waterpump; nothing to brag about Black 2009 45th aniverary edition GT 5 speed: K&N CAI, BBK Twin 62mm Throttle Body, BBK Underdrive Pullies, SLP Loudmouth

July 10th, 2008, 06:04 PM	#113
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,481 iTrader: 2 reviews	Glad you got her back on the road. __________________ ΜΟΛΩΝ ΛΑΒΕ

July 12th, 2008, 01:08 PM	#114
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	Just went for a ride too see if I could get the shmmy out of it... Got the shimmy out of it by tightening the lug nuts and the strut bolts... But anyway i get on her a little bit, and all the sudden its louder than a top fuel car... Turns out my x pipe T bolt fell off and allowe the x pipe to slide off... It was dragging on the street. lucky i was only a few blocks from home. So i tied up the x pipe and now i get to fix it... I cant wait to just run the piss out of the car on Wedsday... I havent done that yet. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

July 12th, 2008, 02:42 PM	#116
HBK_2007 Genibus Nitito Canus 2009 Ford Mustang GT Join Date: Jan 2008 Location: Wyoming Posts: 2,827 iTrader: 0 reviews	could be worse, ur wheel coulda fallen off with the bad nut __________________ Red 1996 GT: JLT RAI, Steeda Underdrive pullies, Stewart Waterpump; nothing to brag about Black 2009 45th aniverary edition GT 5 speed: K&N CAI, BBK Twin 62mm Throttle Body, BBK Underdrive Pullies, SLP Loudmouth

July 12th, 2008, 04:37 PM	#117
futureMACH1racer I.D.G.A.F. 2009 John Deere 9670 Join Date: Sep 2007 Location: United States of America Posts: 11,329 iTrader: 0 reviews	Looks tits bro __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

July 13th, 2008, 12:36 AM	#118
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	exhaust is back on and tighter than before, but i still need to buy 2 new T bolts. But she should be ready for Wedsday with out the nitrious, i may run a 100 shot. But Im going to put in the QA1 K member tommorow after work with my buddy jeff... Im hoping for a 14.9 but ill be happy just to be back... on nitrous i hope for about what i was runnng before 14.2s-13.8s. We will see. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

July 13th, 2008, 01:28 AM	#119
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	if you have a manual there should be a fill plug on the side just fill til it spills out then plug it. has to be that exact level good to see her going i was hoping to have mine done today but i got the rain delay =/ plus my 1 man team doesnt make things go by faster __________________ [SIGPIC][/SIGPIC] Acmillr loves me

July 13th, 2008, 10:06 AM	#120
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,672 iTrader: 3 reviews	Yeah ill be doing the tranny fluid later tonight when i do the QA1 k member. I also have to keep flushing the radiator and the block with water and radiator flush, and its slowly becomming less rusty water... __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/clubhouse/77196-beast-part-2-a.html
Posted By	For	Type	Date
The Beast Part 2 - Page 6	This thread	Refback	July 9th, 2008 02:44 PM
The Beast Part 2 - Page 3	This thread	Refback	July 1st, 2008 09:40 AM

Threads Similar to: The Beast Part 2
Thread	Thread Starter	Forum	Replies	Last Post
New beast here, A handsome Beast i might add	562cobra	New Members Introductions	13	June 2nd, 2008 08:19 PM
The Beast	MustangMatt96GT	The Clubhouse	436	May 4th, 2008 12:51 AM
The Beast	Rosco P	Pictures	12	April 13th, 2008 12:21 AM
LT and The Beast?	Frosstang00	99-04	0	March 7th, 2008 04:41 AM
The Beast	fox trot	5.0 Mustangs	8	June 16th, 2007 12:21 PM

All times are GMT -4. The time now is 04:42 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.