Lets try this again. - Mach 1 Crew

July 13th, 2008, 12:47 AM

That sux.. I will have buy new ones but atleast this time I will get to pick the brand I want. When I bought the 98 it already had BBK LT's on it.. I am however gonna take the catback from the 98 and put it on my Mach1..

July 13th, 2008, 12:49 AM

OH, FM1R I am getting stationed @ Ft. Bragg.. You ready to cruise when I get to NC?

futureMACH1racer · July 13th, 2008, 02:19 AM

Hell yes

July 13th, 2008, 06:35 AM

Can't wait bro its gonna be fun..

futureMACH1racer · July 13th, 2008, 02:29 PM

I don't know what city Ft. Bragg is in, but I'm bringing the Mach down here very shortly. We'll for sure chill.

July 13th, 2008, 02:32 PM

chill and get some kills lol..

futureMACH1racer · July 13th, 2008, 02:33 PM

For sure bro, I can't wait. There is so much rice down here

July 13th, 2008, 02:42 PM

Hit me up on my yahoo messenger I am redliner_x I am invisible right now..

July 13th, 2008, 02:43 PM

I should have my bottle waitin on me when I get home..

armymike63b · July 14th, 2008, 04:40 PM

i was thinkin about getting my car repainted with a glossier paint and was thinkin about getting the stripe painted on do you guys think that will hurt the value

armymike63b · July 14th, 2008, 04:41 PM

idk if you guys have heard but they say you can raise the shaker and get like 2 lbs of boost lol....but don't do it my buddy did it and he was at the track and since it was higher when he took off the shaker cracked the hood

July 14th, 2008, 06:06 PM

Car vs. Car without the driver mod junk what would I have to do to beat LSWONGTO? Gears, M/T DR's, and tune Or all that and the bottle?

futureMACH1racer · July 14th, 2008, 06:19 PM

Gears, dr's, tune, and 100 shot. That should make it a driver's race.

Doc8224 · July 14th, 2008, 06:37 PM

hammer down boys. 8 beers and counting

futureMACH1racer · July 14th, 2008, 06:41 PM

Interesting I had one earlier, I think that I'll have another

Doc, you think that I'll break into high 11's when I run the car at the track this summer? I haven't ran the car since I went up to a 150 shot, and ported the intake, and adjusted my suspension. I'm also going to be running big and littles.

06RedfireGT · July 14th, 2008, 06:43 PM

Oh, I most definitely think you would.

Doc8224 · July 14th, 2008, 06:47 PM

Yea I hope so. I ran 12.6 with a mid pipe and a 100 shot. Nothing else at all and it was an auto. I will drive up there and kick your ass if you don't. Just a little FYI the heads are getting finished tonite and the short block is being assembled tommorow. she should come to life next saturday. wish us luck

futureMACH1racer · July 14th, 2008, 06:51 PM

I wish you guys the best of luck. I have almost everything that I need for the build except for the cams. I just sold my snowmobile because I haven't started since I bought it. (Yeah, that is right. I bought a brand new sled, and never rode because I had to come to NC) and I almost have the Lightning finished, and ready for sale. Once the intercooler gets back it's gone. After that I'll be ready to start pulling the motor out.

06RedfireGT · July 14th, 2008, 06:51 PM

Sweet guys. Good luck to both of you.

Doc8224 · July 14th, 2008, 06:53 PM

Good luck with it. Get some good cams and valves. Thats the best advise I can give you. There is alot to be gained there. You need custom grinds.

July 13th, 2008, 02:19 AM	#63
futureMACH1racer Honeybadger is Crazy 2008 F-250 Super Duty Join Date: Sep 2007 Location: United States of America Posts: 10,883 iTrader: 0 reviews	Hell yes __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

July 13th, 2008, 02:29 PM	#65
futureMACH1racer Honeybadger is Crazy 2008 F-250 Super Duty Join Date: Sep 2007 Location: United States of America Posts: 10,883 iTrader: 0 reviews	I don't know what city Ft. Bragg is in, but I'm bringing the Mach down here very shortly. We'll for sure chill. __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

July 13th, 2008, 02:33 PM	#67
futureMACH1racer Honeybadger is Crazy 2008 F-250 Super Duty Join Date: Sep 2007 Location: United States of America Posts: 10,883 iTrader: 0 reviews	For sure bro, I can't wait. There is so much rice down here __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

July 14th, 2008, 04:40 PM	#70
armymike63b Regular 2004 mustang mach 1 Join Date: Nov 2007 Location: killeen texas Posts: 335 iTrader: 0 reviews	i was thinkin about getting my car repainted with a glossier paint and was thinkin about getting the stripe painted on do you guys think that will hurt the value __________________ MM MACH 1 CREW MILITARY CREW

July 14th, 2008, 04:41 PM	#71
armymike63b Regular 2004 mustang mach 1 Join Date: Nov 2007 Location: killeen texas Posts: 335 iTrader: 0 reviews	idk if you guys have heard but they say you can raise the shaker and get like 2 lbs of boost lol....but don't do it my buddy did it and he was at the track and since it was higher when he took off the shaker cracked the hood __________________ MM MACH 1 CREW MILITARY CREW

July 13th, 2008, 12:47 AM	#61
BlackSunshine Guest Posts: n/a	That sux.. I will have buy new ones but atleast this time I will get to pick the brand I want. When I bought the 98 it already had BBK LT's on it.. I am however gonna take the catback from the 98 and put it on my Mach1..

July 13th, 2008, 12:49 AM	#62
BlackSunshine Guest Posts: n/a	OH, FM1R I am getting stationed @ Ft. Bragg.. You ready to cruise when I get to NC?

July 13th, 2008, 06:35 AM	#64
BlackSunshine Guest Posts: n/a	Can't wait bro its gonna be fun..

July 13th, 2008, 02:32 PM	#66
BlackSunshine Guest Posts: n/a	chill and get some kills lol..

July 13th, 2008, 02:42 PM	#68
BlackSunshine Guest Posts: n/a	Hit me up on my yahoo messenger I am redliner_x I am invisible right now..

July 13th, 2008, 02:43 PM	#69
BlackSunshine Guest Posts: n/a	I should have my bottle waitin on me when I get home..

July 14th, 2008, 06:06 PM	#72
BlackSunshine Guest Posts: n/a	Car vs. Car without the driver mod junk what would I have to do to beat LSWONGTO? Gears, M/T DR's, and tune Or all that and the bottle?

July 14th, 2008, 06:19 PM	#73
futureMACH1racer Honeybadger is Crazy 2008 F-250 Super Duty Join Date: Sep 2007 Location: United States of America Posts: 10,883 iTrader: 0 reviews	Gears, dr's, tune, and 100 shot. That should make it a driver's race. __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

July 14th, 2008, 06:37 PM	#74
Doc8224 N/A 4v Guru 2003 Mach 1 Join Date: Oct 2007 Location: Afghanistan Posts: 3,463 Blog Entries: 2 iTrader: 1 reviews	hammer down boys. 8 beers and counting __________________ Military Crew U.S. Army Aviation Apache's Lead The Way

July 14th, 2008, 06:41 PM	#75
futureMACH1racer Honeybadger is Crazy 2008 F-250 Super Duty Join Date: Sep 2007 Location: United States of America Posts: 10,883 iTrader: 0 reviews	Interesting I had one earlier, I think that I'll have another Doc, you think that I'll break into high 11's when I run the car at the track this summer? I haven't ran the car since I went up to a 150 shot, and ported the intake, and adjusted my suspension. I'm also going to be running big and littles. __________________ RIP Travis Bilings 5/6/1982-7/5/2011 Be polite. Be professional. But have a plan to kill everyone you meet.

July 14th, 2008, 06:43 PM	#76
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,202 iTrader: 2 reviews	Oh, I most definitely think you would. __________________ ΜΟΛΩΝ ΛΑΒΕ

July 14th, 2008, 06:51 PM	#79
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,202 iTrader: 2 reviews	Sweet guys. Good luck to both of you. __________________ ΜΟΛΩΝ ΛΑΒΕ

July 14th, 2008, 06:47 PM	#77
Doc8224 N/A 4v Guru 2003 Mach 1 Join Date: Oct 2007 Location: Afghanistan Posts: 3,463 Blog Entries: 2 iTrader: 1 reviews	Yea I hope so. I ran 12.6 with a mid pipe and a 100 shot. Nothing else at all and it was an auto. I will drive up there and kick your ass if you don't. Just a little FYI the heads are getting finished tonite and the short block is being assembled tommorow. she should come to life next saturday. wish us luck __________________ Military Crew U.S. Army Aviation Apache's Lead The Way

July 14th, 2008, 06:53 PM	#80
Doc8224 N/A 4v Guru 2003 Mach 1 Join Date: Oct 2007 Location: Afghanistan Posts: 3,463 Blog Entries: 2 iTrader: 1 reviews	Good luck with it. Get some good cams and valves. Thats the best advise I can give you. There is alot to be gained there. You need custom grinds. __________________ Military Crew U.S. Army Aviation Apache's Lead The Way

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/clubhouse/79003-lets-try-again-mach-1-crew.html
Posted By	For	Type	Date
Local Search: A Let's DO It Again Tire	This thread	Refback	July 11th, 2009 06:12 AM
Lets try this again. - Mach 1 Crew - Page 12	This thread	Refback	December 10th, 2008 09:26 PM
Lets try this again. - Mach 1 Crew - Page 8	This thread	Refback	July 22nd, 2008 10:29 PM
Lets try this again. - Mach 1 Crew - Page 6	This thread	Refback	July 20th, 2008 10:15 PM

Threads Similar to: Lets try this again. - Mach 1 Crew
Thread	Thread Starter	Forum	Replies	Last Post
For you Mach 1 Crew guys.	weems	4V / SVT	77	July 5th, 2008 08:39 PM
Hurst Crew?	WilltheThrill	The Clubhouse	6	December 3rd, 2007 08:50 PM
Lets upgrade o3 mach system	LSeyforth	Audio/Video	1	July 9th, 2007 07:05 PM
New to the Crew	j25	New Members Introductions	11	July 11th, 2006 05:51 PM

All times are GMT -4. The time now is 08:49 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.