ANYONE SEE PINKS ALL OUT!!

GTXRacing · March 22nd, 2007, 12:37 PM

DUDE WTF Was up with the people and the Ford bodies with chevy motors and chevy bodies with Ford motors? I must ask, Why do people do that and not just get a 100% chevy or 100% Ford from the very beginning?

mikebert · March 22nd, 2007, 12:40 PM

Because it's faster to put a BBC in a small Fox body? Comparable F-bodies weigh more and BBF aren't as fast? Try posting in the Clubhouse / Racer forum though.

GTXRacing · March 22nd, 2007, 01:24 PM

Well I was just curious... thanks

MODERATOR: PLEASE DELETE THIS POST

mikebert · March 22nd, 2007, 01:32 PM

Originally Posted by GTXRacing

Well I was just curious... thanks

MODERATOR: PLEASE DELETE THIS POST

Thanks for asking them to delete the post; I know they don't enforce the topic rules very strictly, but it's still nice to not clutter boards with off topic stuff. Not to mention, you may get a better response in the right forum!

But before we get deleted, I would just say that it's not always the case that Ford body + Chevy engine = the win. However, Foxes are light and cheap, especially if you just wanting a rolling chassis. From what I've seen it's cheaper to build Chevy engines than Ford, atleast small block wise. So it's a good way to build a drag car on a budget.

GTXRacing · March 22nd, 2007, 01:47 PM

Well I guess we'll chat until this post is over...

Well does the 350's bolt right up to the Ford tranny?

GTXRacing · March 22nd, 2007, 01:47 PM

I' curious because if not you're talking more more and maybe cash just to get chevy engine to work

mikebert · March 22nd, 2007, 01:52 PM

Originally Posted by GTXRacing

Well I guess we'll chat until this post is over...

Well does the 350's bolt right up to the Ford tranny?

I don't know, but I think the common swap is put the Chevy engine and trans in, keep the rear end or upgrade to a Ford 9 if you make serious power.

GTXRacing · March 22nd, 2007, 02:03 PM

oh, well not doing that! LOL

Hell if people stop ordering from Jegs, the parts will be cheaper to buy just as the cost of a cheapy motor. I must admit, the World Ford motor do cost a hell of a lot like, $12,000 seriously for a motor with 635hp. I know I can build that much much cheaper and still achieve the hp.

Crap, I meant Chvey motor

whiteboycustom · March 22nd, 2007, 02:53 PM

i watched pinks last night and seen the camero with the ford motor i was like wtf!!!!!, and i went to baytown and seen pinks all out in person and they have a fox with a s/c chevy motor, pretty crazy but i rahter pay more and keep ford with ford,,,,,,, smae thing with my honda 450r only heat shield that will fit my aftermarket exhaust is a yamaha shield and i wont put yammi shit on my honda

89StangGT · March 22nd, 2007, 03:06 PM

a buddy of mine has a 94 mustang with a twin turbo 500ci chevy motor on a drag radial. not a bad 8 second ride.

89StangGT · March 22nd, 2007, 03:08 PM

oh, and moved to the racers corner. no need to delete a good topic!

GTXRacing · March 22nd, 2007, 03:13 PM

Well I'm sorry, I will be disrespecting my Ford Family if I was to even think about getting Chevy valve covers. I really don't see the point in flip flopping engines like that. Hell 306 with twins and good heads and a great set of head gaskets can make 600hp off the bat if i'm not mistaken, so take that to a 351 or 400 and have a blast.

I will admit that camaro was fast as hell and guess what...(FORD ENGINE)

89StangGT · March 22nd, 2007, 04:44 PM

i would hope you can make a 600 hp twin turbo 306. i know guys who have 600 and 700 horse small block chevys all motor.

BWAL · March 22nd, 2007, 04:49 PM

Originally Posted by 89StangGT

i would hope you can make a 600 hp twin turbo 306. i know guys who have 600 and 700 horse small block chevys all motor.

hey man, sorry to be off topic, but is your mustang still for sale?

89StangGT · March 23rd, 2007, 12:33 AM

its always forsale =]

March 22nd, 2007, 12:37 PM	#1
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 733 iTrader: 0 reviews	ANYONE SEE PINKS ALL OUT!! DUDE WTF Was up with the people and the Ford bodies with chevy motors and chevy bodies with Ford motors? I must ask, Why do people do that and not just get a 100% chevy or 100% Ford from the very beginning? __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

March 22nd, 2007, 01:24 PM	#3
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 733 iTrader: 0 reviews	Well I was just curious... thanks MODERATOR: PLEASE DELETE THIS POST __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

March 22nd, 2007, 01:47 PM	#5
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 733 iTrader: 0 reviews	Well I guess we'll chat until this post is over... Well does the 350's bolt right up to the Ford tranny? __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

March 22nd, 2007, 01:47 PM	#6
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 733 iTrader: 0 reviews	I' curious because if not you're talking more more and maybe cash just to get chevy engine to work __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

March 22nd, 2007, 02:03 PM	#8
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 733 iTrader: 0 reviews	oh, well not doing that! LOL Hell if people stop ordering from Jegs, the parts will be cheaper to buy just as the cost of a cheapy motor. I must admit, the World Ford motor do cost a hell of a lot like, $12,000 seriously for a motor with 635hp. I know I can build that much much cheaper and still achieve the hp. Crap, I meant Chvey motor __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

March 22nd, 2007, 12:40 PM	#2
mikebert Enthusiast Join Date: Oct 2006 Location: Augusta, GA Posts: 906 iTrader: 0 reviews	Because it's faster to put a BBC in a small Fox body? Comparable F-bodies weigh more and BBF aren't as fast? Try posting in the Clubhouse / Racer forum though.

March 22nd, 2007, 02:53 PM	#9
whiteboycustom El Conquistador 83 coupe Join Date: Feb 2007 Location: vidor,texas Posts: 1,146 iTrader: 0 reviews	i watched pinks last night and seen the camero with the ford motor i was like wtf!!!!!, and i went to baytown and seen pinks all out in person and they have a fox with a s/c chevy motor, pretty crazy but i rahter pay more and keep ford with ford,,,,,,, smae thing with my honda 450r only heat shield that will fit my aftermarket exhaust is a yamaha shield and i wont put yammi shit on my honda __________________ http://www.donttearmedown.com/

March 22nd, 2007, 03:06 PM	#10
89StangGT Moderator SVT Cobra Mustang Join Date: Aug 2006 Location: Toledo, Ohio Posts: 1,843 iTrader: 0 reviews	a buddy of mine has a 94 mustang with a twin turbo 500ci chevy motor on a drag radial. not a bad 8 second ride. __________________ There's a reason Ford codenamed them the Terminator

March 22nd, 2007, 03:08 PM	#11
89StangGT Moderator SVT Cobra Mustang Join Date: Aug 2006 Location: Toledo, Ohio Posts: 1,843 iTrader: 0 reviews	oh, and moved to the racers corner. no need to delete a good topic! __________________ There's a reason Ford codenamed them the Terminator

March 22nd, 2007, 03:13 PM	#12
GTXRacing Enthusiast Join Date: Apr 2006 Location: Greenville, Texas Posts: 733 iTrader: 0 reviews	Well I'm sorry, I will be disrespecting my Ford Family if I was to even think about getting Chevy valve covers. I really don't see the point in flip flopping engines like that. Hell 306 with twins and good heads and a great set of head gaskets can make 600hp off the bat if i'm not mistaken, so take that to a 351 or 400 and have a blast. I will admit that camaro was fast as hell and guess what...(FORD ENGINE) __________________ THE BEAST IS FOR SALE!!! GTX RACING & PERFORMACE CLUB OF TEXAS Meets and greets, drag racing and good eats, you know you want it. GTX Racing Tony P. 214-257-3635 http://www.moddedmustangs.com/forums...vehicle&CID=43

March 22nd, 2007, 04:44 PM	#13
89StangGT Moderator SVT Cobra Mustang Join Date: Aug 2006 Location: Toledo, Ohio Posts: 1,843 iTrader: 0 reviews	i would hope you can make a 600 hp twin turbo 306. i know guys who have 600 and 700 horse small block chevys all motor. __________________ There's a reason Ford codenamed them the Terminator

March 23rd, 2007, 12:33 AM	#15
89StangGT Moderator SVT Cobra Mustang Join Date: Aug 2006 Location: Toledo, Ohio Posts: 1,843 iTrader: 0 reviews	its always forsale =] __________________ There's a reason Ford codenamed them the Terminator

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: ANYONE SEE PINKS ALL OUT!!
Thread	Thread Starter	Forum	Replies	Last Post
pinks all out	03_StangGuy	5.0 Mustangs	7	September 7th, 2007 10:35 PM
Pinks	acehogg69	The Clubhouse	15	July 27th, 2007 09:17 PM
Pinks	Tony_90fox	The Clubhouse	29	March 12th, 2007 04:31 AM
pinks	232stang	The Clubhouse	1	February 3rd, 2007 03:47 AM
Pinks	The eaglenator	The Clubhouse	28	November 11th, 2006 01:35 PM

All times are GMT -4. The time now is 01:59 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.