[NUTCASE]

ok so I have run NO2 before but never at the track.

I do know that you have to have a blow down tube. however does this tube need to exit the vehicle somehow? or can it just chill there?

also for my setup, basically I am trying to figure all this out from afghanistan without my car actually here to take measurements.......

I want to take one of these : Archeat: DUAL Nitrous Bottle Heated Anodized Aluminum Billet Brackets

and either mount it on the board above the spare in the middle of the trunk, or remove the spare and mount it to the bottom of the spare well.

where this gets trucky is I know this will work with 10# bottles, and I already have 2 of them. I am looking at a classified right now where I can get a 15# pretty cheap and that is what I would like to have if possible. with the setup I am going for does anyone happen to know if this will even fit with a 15#? if possible I will just roll with the 2 10#s I already have and run the 2 15#s when they get empty

I had been bench racing this idea but never realized lenght might be a problem until I actually saw a pic of a 15# next to a 10#

btw we are talking about a 2006 hardtop.

thanks

[F8L GT]

as far as the bottles I cant really help you out but with the blow down tube, yes it must vent to outside the car