BMR Suspension At Work! Launch Pic Inside

BMR Tech · July 26th, 2011, 10:34 AM

BMR Suspension hard at work on our 2011 Mustang GT project/development car.

Anyone cut a 1.4 sixty foot time yet on a Drag Radial tire this size?

BaznastyDave · July 26th, 2011, 11:38 AM

1.4 on 17"s! What kind of tire, and what is the car at weight and WHP wise?

mrbigjeep · July 26th, 2011, 11:41 PM

i saw a guy on svtp that cut a 1.4 with 100% stock suspension (nitrous)...but it was def. a 15" wheel lol

Blackbird1084 · July 27th, 2011, 01:55 AM

Judging by what I can see of the tread it looks like mt et street radials 275/40/17's with about 14psi in them.

Blackbird1084 · July 27th, 2011, 02:04 AM

Never mind those are 18" or 19" rims. Mt et street radial 2's 265/40/18's or 305/40/19's those can't be 17's

Blackbird1084 · July 27th, 2011, 03:08 AM

Oh and from the looks of it it's a stalled auto making roughly 450 rwhp. I say that because my TA is only making around 360 rwhp and has a best 60ft of 1.567 on a 275/50/15 mt et street radial at a 3600lb race weight. Being that the car in the pic is full suspension it probably has a race weight of around 3450.

BMR Tech · July 27th, 2011, 01:03 PM

Car is a base model, automatic.

3200 converter.

265/40/18 DR's.

Not sure on the power....nor the weight at this time.

It is a full bolt-on/tuned 2011. 420ish rwhp I assume, if it were a manual. I assume it is 3600ish raceweight, as the only weight reduction is the K-Member/Arms.

saxmanJJ · July 28th, 2011, 12:16 PM

That is impressive.

Repeatable/consistent?

ReverendDexter · July 28th, 2011, 12:19 PM

Looks like a perfect launch, too... weight's transferred, but no so much as to waste energy lifting the fronts off the ground.

BMR Tech · July 28th, 2011, 02:50 PM

Originally Posted by saxmanJJ

That is impressive.

Repeatable/consistent?

Thanks

Yes, this car is very consistent launching, but consistency depends on track prep too. It generally cuts the same or similar sixty foot times every pass.

Originally Posted by ReverendDexter

Looks like a perfect launch, too... weight's transferred, but no so much as to waste energy lifting the fronts off the ground.

I agree.

Blackbird1084 · August 3rd, 2011, 04:00 AM

So it has all the seats, spare, and jack in place. That is impressive.

Blackbird1084 · August 3rd, 2011, 04:02 AM

So what does the car actualy run? 1.49 60fts usualy come from cars running high 10's at 120.

July 26th, 2011, 10:34 AM	#1
BMR Tech Authorized Vendor Join Date: Feb 2009 Posts: 748 iTrader: 0 reviews	BMR Suspension At Work! Launch Pic Inside BMR Suspension hard at work on our 2011 Mustang GT project/development car. Anyone cut a 1.4 sixty foot time yet on a Drag Radial tire this size? __________________ Kelly Aiken "The Ford Guy" BMR Suspension Inc kelly@bmrsuspension.com 813.986.9302 CLICK IF YOU LIKE BMR SUSPENSION

July 26th, 2011, 11:38 AM	#2
BaznastyDave MM Fanatic 2004 Mustang Join Date: May 2010 Location: NC Posts: 4,339 iTrader: 4 reviews	1.4 on 17"s! What kind of tire, and what is the car at weight and WHP wise? __________________ 305/333 WHP/WTQ with CMS Stage II cams 440/552 WHP/WTQ on Spray 7.86 @ 89.1mph, 1.61 60 foot N/A 7.20 @ 98.8MPH 1.55 60 foot on spray Stock Longblock with Cams

July 26th, 2011, 11:41 PM	#3
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	i saw a guy on svtp that cut a 1.4 with 100% stock suspension (nitrous)...but it was def. a 15" wheel lol __________________ cams + 150 shot

July 27th, 2011, 01:55 AM	#4
Blackbird1084 Hardcore Enthusiast Join Date: Feb 2007 Posts: 1,381 iTrader: 1 reviews	Judging by what I can see of the tread it looks like mt et street radials 275/40/17's with about 14psi in them. __________________ 79 Buick regal 13.70 @102 350 sbc 97 Trans Am WS6 11.94 @112.26 1.603 60ft @Kcir 04 SRT-4 13.42@113.55 2.37 60ft 04 Mustang GT 12.19 @111.88 347hp 432tq 100 shot 06 Mustang GT 12.2929@114.30 2.01 60ft MM Bracket Racing Crew Member #4

July 27th, 2011, 02:04 AM	#5
Blackbird1084 Hardcore Enthusiast Join Date: Feb 2007 Posts: 1,381 iTrader: 1 reviews	Never mind those are 18" or 19" rims. Mt et street radial 2's 265/40/18's or 305/40/19's those can't be 17's __________________ 79 Buick regal 13.70 @102 350 sbc 97 Trans Am WS6 11.94 @112.26 1.603 60ft @Kcir 04 SRT-4 13.42@113.55 2.37 60ft 04 Mustang GT 12.19 @111.88 347hp 432tq 100 shot 06 Mustang GT 12.2929@114.30 2.01 60ft MM Bracket Racing Crew Member #4

July 27th, 2011, 03:08 AM	#6
Blackbird1084 Hardcore Enthusiast Join Date: Feb 2007 Posts: 1,381 iTrader: 1 reviews	Oh and from the looks of it it's a stalled auto making roughly 450 rwhp. I say that because my TA is only making around 360 rwhp and has a best 60ft of 1.567 on a 275/50/15 mt et street radial at a 3600lb race weight. Being that the car in the pic is full suspension it probably has a race weight of around 3450. __________________ 79 Buick regal 13.70 @102 350 sbc 97 Trans Am WS6 11.94 @112.26 1.603 60ft @Kcir 04 SRT-4 13.42@113.55 2.37 60ft 04 Mustang GT 12.19 @111.88 347hp 432tq 100 shot 06 Mustang GT 12.2929@114.30 2.01 60ft MM Bracket Racing Crew Member #4

July 27th, 2011, 01:03 PM	#7
BMR Tech Authorized Vendor Join Date: Feb 2009 Posts: 748 iTrader: 0 reviews	Car is a base model, automatic. 3200 converter. 265/40/18 DR's. Not sure on the power....nor the weight at this time. It is a full bolt-on/tuned 2011. 420ish rwhp I assume, if it were a manual. I assume it is 3600ish raceweight, as the only weight reduction is the K-Member/Arms. __________________ Kelly Aiken "The Ford Guy" BMR Suspension Inc kelly@bmrsuspension.com 813.986.9302 CLICK IF YOU LIKE BMR SUSPENSION

July 28th, 2011, 12:16 PM	#8
saxmanJJ Hardcore Enthusiast 2004 Mustang GT 11.463@121.50 Join Date: Jun 2007 Location: SE PA Posts: 1,644 iTrader: 1 reviews	That is impressive. Repeatable/consistent? __________________ MM Bracket Racing Crew Member #5

July 28th, 2011, 12:19 PM	#9
ReverendDexter Priest of the Car Gods Clapped-out '90 GT 'vert ~5.5 seconds off TTOD :( Join Date: Jan 2007 Location: Rohnert Park, CA Posts: 13,808 iTrader: 0 reviews	Looks like a perfect launch, too... weight's transferred, but no so much as to waste energy lifting the fronts off the ground. __________________ O o /¯/______________________ \|BLAAAAAAAAAAAAAAAAAAAAAAAAARGH!!! \_\

August 3rd, 2011, 04:00 AM	#11
Blackbird1084 Hardcore Enthusiast Join Date: Feb 2007 Posts: 1,381 iTrader: 1 reviews	So it has all the seats, spare, and jack in place. That is impressive. __________________ 79 Buick regal 13.70 @102 350 sbc 97 Trans Am WS6 11.94 @112.26 1.603 60ft @Kcir 04 SRT-4 13.42@113.55 2.37 60ft 04 Mustang GT 12.19 @111.88 347hp 432tq 100 shot 06 Mustang GT 12.2929@114.30 2.01 60ft MM Bracket Racing Crew Member #4

August 3rd, 2011, 04:02 AM	#12
Blackbird1084 Hardcore Enthusiast Join Date: Feb 2007 Posts: 1,381 iTrader: 1 reviews	So what does the car actualy run? 1.49 60fts usualy come from cars running high 10's at 120. __________________ 79 Buick regal 13.70 @102 350 sbc 97 Trans Am WS6 11.94 @112.26 1.603 60ft @Kcir 04 SRT-4 13.42@113.55 2.37 60ft 04 Mustang GT 12.19 @111.88 347hp 432tq 100 shot 06 Mustang GT 12.2929@114.30 2.01 60ft MM Bracket Racing Crew Member #4

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: BMR Suspension At Work! Launch Pic Inside
Thread	Thread Starter	Forum	Replies	Last Post
Suspension - better cornering and keep straight launch capability	jgredfire06gt	2005 - 2010	20	December 9th, 2010 07:13 AM
getting the hood latch cable to work (pic inside)	89Domindart	5.0 Mustangs	7	June 8th, 2010 11:39 PM
Video of launch with budget suspension	F8L GT	99-04	70	May 3rd, 2010 06:22 PM
Almost done with the outside, now for inside work.	suzuki827	5.0 Mustangs	13	January 23rd, 2009 10:42 AM

All times are GMT -4. The time now is 06:42 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.