went to the track...VIDS

mrbigjeep · October 21st, 2011, 09:20 PM

was pretty frickin cold...and tire pressure was a tad high...

anyway, spun my way to a 7.55 with a 1.67 sixty foot...here are the vids. you can here it spinning a little

and here i spun my way to a 7.48 with a 1.63...dropped the pressure a little on this run and heated the tires up good...helped but i could've dropped another 1-1.5lbs of psi

ShapeShifter · October 21st, 2011, 11:35 PM

nice.

shouldve ran it on motor to see what times u couldve gotten out of it.

Shaun03GT · October 22nd, 2011, 12:25 AM

Awesome man, 7.48 is so nasty. I wish you had a 1/4 track around you

mrbigjeep · October 22nd, 2011, 02:25 AM

Originally Posted by ShapeShifter

nice.

shouldve ran it on motor to see what times u couldve gotten out of it.

i don't even run on motor any more lol. so boring..although maybe i should have just to see since it was a nice cold night...

Originally Posted by Shaun03GT

Awesome man, 7.48 is so nasty. I wish you had a 1/4 track around you

me too lol. i actually drove 2hours down to the 1/4th mile track last week and it started raining when i got about 30 minutes away...

there is one that is about an hour and fifteen minutes from my work but i'd have to go by myself since its not local. main reason i haven't gone. was actually supposed to go today with a buddy from work but didn't work out...may just have to make the drive down and run by myself lol

BaznastyDave · October 22nd, 2011, 03:12 AM

Let me borrow them slicks n wheels to run my car at Shadyside

mrbigjeep · October 22nd, 2011, 11:20 PM

come to greer dragway on thursday night and i'll let you use them

BaznastyDave · October 23rd, 2011, 12:41 AM

Cant do it, i work 3rd shift. I need to get me a drag setup with my tax money

mrbigjeep · October 23rd, 2011, 03:08 PM

yep, probably one of the best things i've done yet. and i still drive it to and from the track.

mrbigjeep · November 5th, 2011, 02:19 AM

finally got to the 1/4th mile...ran 11.74 at 111mph letting off before the trap...mph shows obviously...

first time doing full quarter mile on the qtp's with kumho radials up front. combination worked very well and felt fine.

zinsavage123 · November 5th, 2011, 02:21 AM

nice mofo was beast off line.

ga289stocker · November 10th, 2011, 02:29 PM

Originally Posted by mrbigjeep

finally got to the 1/4th mile...ran 11.74 at 111mph letting off before the trap...mph shows obviously...

first time doing full quarter mile on the qtp's with kumho radials up front. combination worked very well and felt fine.

That's awesome....car must launch pretty well, what have you done to the suspension? I'm trying to get some advice on this, I've got some DR's but other than the Eibach springs its all stock.

TaintedStang · November 10th, 2011, 06:09 PM

I saw on LS1Tech where you went with Stopsign and an LS1 guy and have been wondering what times you ran. Good job!

mrbigjeep · November 10th, 2011, 11:40 PM

Originally Posted by ga289stocker

That's awesome....car must launch pretty well, what have you done to the suspension? I'm trying to get some advice on this, I've got some DR's but other than the Eibach springs its all stock.

thanks it does leave pretty well. it cut a 1.62 sixty foot on the 11.7 pass

upr tubular front end. stiff 250lb coil over springs
poly/poly lower control arms
adjustable uppers with rod end
subframe connectors
plain jane tokico blues all the way around
rear coil springs are just cut 4cyl fox springs

Originally Posted by TaintedStang

I saw on LS1Tech where you went with Stopsign and an LS1 guy and have been wondering what times you ran. Good job!

thanks! yep it was a fun trip.

i ran the 11.7 and then blew the tires off the 2nd run and ran 12.0 at 115

October 21st, 2011, 09:20 PM	#1
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	went to the track...VIDS was pretty frickin cold...and tire pressure was a tad high... anyway, spun my way to a 7.55 with a 1.67 sixty foot...here are the vids. you can here it spinning a little and here i spun my way to a 7.48 with a 1.63...dropped the pressure a little on this run and heated the tires up good...helped but i could've dropped another 1-1.5lbs of psi __________________ cams + 150 shot

October 21st, 2011, 11:35 PM	#2
ShapeShifter Hardcore Enthusiast Join Date: Jun 2006 Location: RGV, Texas Posts: 1,391 iTrader: 0 reviews	nice. shouldve ran it on motor to see what times u couldve gotten out of it. __________________ Stock w/Flowmasters

October 22nd, 2011, 12:25 AM	#3
Shaun03GT I Post Entirely Way Too Much 2003 Mustang GT 1/8 - 7.92 @ 91.13mph 1/4 - 12.21 @ 115.84mph Join Date: Sep 2009 Location: Weymouth, MA Posts: 13,456 iTrader: 12 reviews	Awesome man, 7.48 is so nasty. I wish you had a 1/4 track around you __________________ Vortech V1 Intercooled @ 11psi 394rwhp/392rwtq @ 9.5psi 415rwhp/400rwtq @ 11psi on Methanol Tuned By: Pete @ Performance Dyno Affordable Supercharger Build Guide Supercharger Info for Noobs

October 22nd, 2011, 03:12 AM	#5
BaznastyDave MM Fanatic 2004 Mustang Join Date: May 2010 Location: NC Posts: 4,339 iTrader: 4 reviews	Let me borrow them slicks n wheels to run my car at Shadyside __________________ 305/333 WHP/WTQ with CMS Stage II cams 440/552 WHP/WTQ on Spray 7.86 @ 89.1mph, 1.61 60 foot N/A 7.20 @ 98.8MPH 1.55 60 foot on spray Stock Longblock with Cams

October 22nd, 2011, 11:20 PM	#6
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	come to greer dragway on thursday night and i'll let you use them __________________ cams + 150 shot

October 23rd, 2011, 12:41 AM	#7
BaznastyDave MM Fanatic 2004 Mustang Join Date: May 2010 Location: NC Posts: 4,339 iTrader: 4 reviews	Cant do it, i work 3rd shift. I need to get me a drag setup with my tax money __________________ 305/333 WHP/WTQ with CMS Stage II cams 440/552 WHP/WTQ on Spray 7.86 @ 89.1mph, 1.61 60 foot N/A 7.20 @ 98.8MPH 1.55 60 foot on spray Stock Longblock with Cams

October 23rd, 2011, 03:08 PM	#8
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	yep, probably one of the best things i've done yet. and i still drive it to and from the track. __________________ cams + 150 shot

November 5th, 2011, 02:19 AM	#9
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	finally got to the 1/4th mile...ran 11.74 at 111mph letting off before the trap...mph shows obviously... first time doing full quarter mile on the qtp's with kumho radials up front. combination worked very well and felt fine. __________________ cams + 150 shot

November 5th, 2011, 02:21 AM	#10
zinsavage123 Hardcore Enthusiast 2001 Mustang GT 12.33@111.23mph Join Date: Aug 2008 Location: baltimore, md Posts: 1,422 iTrader: 3 reviews	nice mofo was beast off line. __________________ 2001 Mustang GT - mods+pics in garage, tuned by matt@performance evolution 1996 Civic DX - my dd

November 10th, 2011, 06:09 PM	#12
TaintedStang MM's Taint Shaver! 2003 Mustang GT Join Date: Dec 2009 Location: Oregon Posts: 6,540 iTrader: 5 reviews	I saw on LS1Tech where you went with Stopsign and an LS1 guy and have been wondering what times you ran. Good job! __________________

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: went to the track...VIDS
Thread	Thread Starter	Forum	Replies	Last Post
Went to the track, 2 vids of how I did.	86_Notch	5.0 Mustangs	3	October 9th, 2010 07:23 AM
Very first track vids	Zatrekaz	Videos	6	June 29th, 2009 01:13 PM
in-car track day vids	03MachMe	Videos	4	April 18th, 2009 01:03 AM
Vids at the track	06GTMustang89	Videos	2	September 15th, 2008 02:22 PM
some vids of me at the track	ricerraper33	Videos	19	October 1st, 2007 06:42 PM

All times are GMT -4. The time now is 06:46 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.