Track vids

GT500Steve · November 25th, 2011, 07:50 PM

Hey guys. New to the forum, and I figure the best way to introduce myself is to post a video of what I love to do. Video was filmed last weekend at Shadyside Dragway in NC.

Shelby GT500 Track Day.... Nov 20, 2011 - YouTube

mrbigjeep · November 26th, 2011, 01:16 AM

nice! you goin out to shady this sunday if the weather is nice?

GT500Steve · November 26th, 2011, 06:54 AM

Originally Posted by mrbigjeep

nice! you goin out to shady this sunday if the weather is nice?

Thanks man.... I doubt I will be back at the track till the first of the year. I gotta take the rear end apart and look at the gear, its whining like crazy. Plus I need some suspension parts too. Hopefully some shocks and LCAs will let me get the 60ft down in the mid to low 1.50s. If I can get the 60ft right, it might be enough to get me in the 6s, which is my goal on the stock blower. So far the best is a 7.23 @ 101.50.

Btw, saw the videos of your car from Greer. Looked good! That thing is haulin ass

JTs03v6 · November 26th, 2011, 09:00 AM

Nice times man! Definatlly has a 6 sec pass in it. That is my goal as well to break into 6's.

I will let you in on a little secret that is an easy and cheap suspension mod, Throw a set of a-1000 air bags from summit racing in each spring and never have wheel hop issues again. I run 5psi in drv side bag and 10psi in pass side bag and the car 60's low 1.60's and has even cut a 1.59 before. Should be solid 1.5's after the trans brake goes in it.

GT500Steve · November 26th, 2011, 04:24 PM

Originally Posted by JTs03v6

Nice times man! Definatlly has a 6 sec pass in it. That is my goal as well to break into 6's.

I will let you in on a little secret that is an easy and cheap suspension mod, Throw a set of a-1000 air bags from summit racing in each spring and never have wheel hop issues again. I run 5psi in drv side bag and 10psi in pass side bag and the car 60's low 1.60's and has even cut a 1.59 before. Should be solid 1.5's after the trans brake goes in it.

Man, I used to have those in my old 89 LX. They made all the difference in the world.... car would run a 1.41-1.43 60ft time on 26X10 ET Drags (Nitrous w/ a C4 Trans). They really work! I am planning on buying a set of those and some Lower arms with the relocation brackets. Since my car is lowered it will get the proper pinion angle back. Then hopefully I can hit it a little harder out of the hole

mrbigjeep · November 26th, 2011, 05:42 PM

thanks!

i'm sure i'll see ya out there next year

BaznastyDave · November 28th, 2011, 03:19 AM

DUUUUUDE I GO TO SHADYSIDE TOO! I'm hoping to go this Sunday with my new slicks n skinnies. Hoping for a 7.8-7.9 on motor, I don't think I will be running the spray though bc I don't have my new switch panel yet all my switches are under the console.

GT500Steve · November 28th, 2011, 07:50 PM

Originally Posted by BaznastyDave

DUUUUUDE I GO TO SHADYSIDE TOO! I'm hoping to go this Sunday with my new slicks n skinnies. Hoping for a 7.8-7.9 on motor, I don't think I will be running the spray though bc I don't have my new switch panel yet all my switches are under the console.

Cool man. Thats a good lookin car you got there. Hope you get the ET your after! I love Shadyside this time of year... as long as its not too cold you can get some really good times. Im hoping to have my car ready to go back at the first of the year.

November 26th, 2011, 01:16 AM	#2
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	nice! you goin out to shady this sunday if the weather is nice? __________________ cams + 150 shot

November 26th, 2011, 09:00 AM	#4
JTs03v6 Hardcore Enthusiast 2003 mustang 7.48x1.56=11.67 Join Date: Sep 2009 Location: East Coast Posts: 2,318 iTrader: 0 reviews	Nice times man! Definatlly has a 6 sec pass in it. That is my goal as well to break into 6's. I will let you in on a little secret that is an easy and cheap suspension mod, Throw a set of a-1000 air bags from summit racing in each spring and never have wheel hop issues again. I run 5psi in drv side bag and 10psi in pass side bag and the car 60's low 1.60's and has even cut a 1.59 before. Should be solid 1.5's after the trans brake goes in it. __________________ New combo: Forged SC short Block,280cfm heads, Precision 6262 turbo, cx 31x12x3 fmic http://photobucket.com/JTsTurboBuild http://youtube.com/user/JTsStang

November 26th, 2011, 05:42 PM	#6
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	thanks! i'm sure i'll see ya out there next year __________________ cams + 150 shot

November 28th, 2011, 03:19 AM	#7
BaznastyDave MM Fanatic 2004 Mustang Join Date: May 2010 Location: NC Posts: 4,339 iTrader: 4 reviews	DUUUUUDE I GO TO SHADYSIDE TOO! I'm hoping to go this Sunday with my new slicks n skinnies. Hoping for a 7.8-7.9 on motor, I don't think I will be running the spray though bc I don't have my new switch panel yet all my switches are under the console. __________________ 305/333 WHP/WTQ with CMS Stage II cams 440/552 WHP/WTQ on Spray 7.86 @ 89.1mph, 1.61 60 foot N/A 7.20 @ 98.8MPH 1.55 60 foot on spray Stock Longblock with Cams

Threads Similar to: Track vids
Thread	Thread Starter	Forum	Replies	Last Post
went to the track...VIDS	mrbigjeep	Drag	12	November 10th, 2011 11:40 PM
Few vids from the track	Shaun03GT	Videos	0	October 8th, 2011 11:51 PM
Went to the track, 2 vids of how I did.	86_Notch	5.0 Mustangs	3	October 9th, 2010 07:23 AM
Very first track vids	Zatrekaz	Videos	6	June 29th, 2009 01:13 PM
some vids of me at the track	ricerraper33	Videos	19	October 1st, 2007 06:42 PM

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 06:47 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.