1/4 mile time

Dmathews · January 16th, 2012, 02:29 PM

I have a stock 02 gt convert that only has pulleys and bbk cai. It is a 5speed and I want to put 4:10 gears, exhaust, and a stage 2 cams. What could I expect to run. Would probably be running stock 17s

saxmanJJ · January 16th, 2012, 06:37 PM

Even with the planned mods you will be limited by the stock tires. I'd say you might run 13.50s-13.30s with that setup.

Wheels and tires (and the 4.10s) are your best first mods for the strip.

eddy21x · January 16th, 2012, 06:56 PM

Originally Posted by saxmanJJ

Even with the planned mods you will be limited by the stock tires. I'd say you might run 13.50s-13.30s with that setup.

Wheels and tires (and the 4.10s) are your best first mods for the strip.

im running on 18's 245 45 18 generic firestone brand 89 a piece

4.30's n/a convertible auto (stock stall)

i think OP can pull of a 13.2 at least 13 flat i think

Dmathews · January 17th, 2012, 04:13 AM

Well with gears and tires what would one expect to run?

TaintedStang · January 17th, 2012, 03:12 PM

Mid twelves with good driving and stickier tires. This is also dependent on the track elevation and DA.

saxmanJJ · January 17th, 2012, 07:42 PM

Originally Posted by Dmathews

Well with gears and tires what would one expect to run?

13.00s until you learn how to really get the most out of it, then 12.70s-12.50s when you figure it out.

BTW, you're going to have to launch the car at 5500 or more rpms to get the most out of it.

saxmanJJ · January 17th, 2012, 07:44 PM

Above post not meant to be an insult - it takes a bit of practice to wring out every tenth of a second.

Dmathews · January 19th, 2012, 01:38 PM

I was just wondering. I just bought the car and as it sits it's just has the bbk cai and pullys and everything else is stock so the mods I do first I want to be the best I can. I'm nt going to lie I am not good with this five speed yet lol

mrbigjeep · January 19th, 2012, 06:13 PM

i would take it to the track and run it as is before adding any mods...learn how to drive it correctly at the track and get used to the car...then add some mods and get the most out of it

casper gt · January 21st, 2012, 11:21 PM

Originally Posted by Dmathews

I was just wondering. I just bought the car and as it sits it's just has the bbk cai and pullys and everything else is stock so the mods I do first I want to be the best I can. I'm nt going to lie I am not good with this five speed yet lol

a cammed/4.10 geared stick car at the track, isn't for a beginner.

I'd save your money for now & learn how to drive the car at the track as is before you worry about mods.

January 16th, 2012, 02:29 PM	#1
Dmathews Newbie Join Date: Jan 2012 Posts: 13 iTrader: 0 reviews	1/4 mile time I have a stock 02 gt convert that only has pulleys and bbk cai. It is a 5speed and I want to put 4:10 gears, exhaust, and a stage 2 cams. What could I expect to run. Would probably be running stock 17s

January 16th, 2012, 06:37 PM	#2
saxmanJJ Hardcore Enthusiast 2004 Mustang GT 11.463@121.50 Join Date: Jun 2007 Location: SE PA Posts: 1,644 iTrader: 1 reviews	Even with the planned mods you will be limited by the stock tires. I'd say you might run 13.50s-13.30s with that setup. Wheels and tires (and the 4.10s) are your best first mods for the strip. __________________ MM Bracket Racing Crew Member #5

January 17th, 2012, 03:12 PM	#5
TaintedStang MM's Taint Shaver! 2003 Mustang GT Join Date: Dec 2009 Location: Oregon Posts: 6,540 iTrader: 5 reviews	Mid twelves with good driving and stickier tires. This is also dependent on the track elevation and DA. __________________

January 17th, 2012, 07:44 PM	#7
saxmanJJ Hardcore Enthusiast 2004 Mustang GT 11.463@121.50 Join Date: Jun 2007 Location: SE PA Posts: 1,644 iTrader: 1 reviews	Above post not meant to be an insult - it takes a bit of practice to wring out every tenth of a second. __________________ MM Bracket Racing Crew Member #5

January 19th, 2012, 06:13 PM	#9
mrbigjeep I Post Entirely Way Too Much 04 mustang gt 7.21 @ 98 Join Date: Apr 2008 Location: upstate sc Posts: 5,923 iTrader: 1 reviews	i would take it to the track and run it as is before adding any mods...learn how to drive it correctly at the track and get used to the car...then add some mods and get the most out of it __________________ cams + 150 shot

January 17th, 2012, 04:13 AM	#4
Dmathews Newbie Join Date: Jan 2012 Posts: 13 iTrader: 0 reviews	Well with gears and tires what would one expect to run?

January 19th, 2012, 01:38 PM	#8
Dmathews Newbie Join Date: Jan 2012 Posts: 13 iTrader: 0 reviews	I was just wondering. I just bought the car and as it sits it's just has the bbk cai and pullys and everything else is stock so the mods I do first I want to be the best I can. I'm nt going to lie I am not good with this five speed yet lol

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: 1/4 mile time
Thread	Thread Starter	Forum	Replies	Last Post
1/4 mile time	eddy21x	Drag	20	January 16th, 2012 07:10 PM
*** zincv new best 1/4 mile time!!**best 1/4 mile	zinc-vert02	Drag	65	October 31st, 2011 03:14 PM
new best 1/8 mile time :) vid	JoshC!	Drag	8	March 21st, 2011 07:59 PM
does my 1/4 mile time seem right	JK7208	Drag	5	October 11th, 2009 03:17 PM
1/8th mile time?	84killer	5.0 Mustangs	4	September 30th, 2008 02:09 PM

All times are GMT -4. The time now is 06:48 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.