| ![]() | ||||||||||||
| |||||||||||||
|
|||||||
![]() |
|
|
|
LinkBack (3) | Thread Tools |
|
|
#181 |
|
Regular
2008 Mustang Gt
11.4@119.9
Join Date: Aug 2008
Location: New Jersey
Posts: 119
![]() iTrader: 0 reviews
|
__________________
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#182 |
|
Regular
03 DSG GT
12.82@111.23mph
Join Date: Jan 2007
Location: Baytown, TX
Posts: 285
![]() iTrader: 3 reviews
|
13.49 1/4
the car is an auto, and at the time i had removed the rear seat, spare and jack, had 1/2 tank of gas mods were/still are the CAI, o/r h, and a tune... that tune was wayyy more aggressive than what i run around with as the daily tune.. it was running so lean, i was probably on the edge of letting the motor go.. and that was without the bottle!! |
|
|
|
#183 |
|
MM Fanatic
2004 Mustang
Join Date: May 2010
Location: NC
Posts: 4,339
![]() ![]() ![]() ![]() ![]() ![]() iTrader: 4 reviews
|
New best of........
7.88 85.3mph 1.61 60 foot That was on motor, no spray with 285WHP
__________________
![]() 305/333 WHP/WTQ with CMS Stage II cams 440/552 WHP/WTQ on Spray 7.86 @ 89.1mph, 1.61 60 foot N/A 7.20 @ 98.8MPH 1.55 60 foot on spray Stock Longblock with Cams |
|
|
|
#184 | |
|
Enthusiast
1997 Mustang GT
13.56@102.94
Join Date: Oct 2007
Location: Murfreesboro and Old Hickory, TN
Posts: 889
![]() iTrader: 1 reviews
|
![]() What was your race weight or weight without driver?
__________________
![]() 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.045 60ft 13.56@102.94 all on stock 245-17's My Garage |
|
|
|
|
#185 |
|
MM Fanatic
2004 Mustang
Join Date: May 2010
Location: NC
Posts: 4,339
![]() ![]() ![]() ![]() ![]() ![]() iTrader: 4 reviews
|
Not sure, only weight reduction is a tubular K and A-arms. Still has a lot left in it with some suspension tweaking
![]()
__________________
![]() 305/333 WHP/WTQ with CMS Stage II cams 440/552 WHP/WTQ on Spray 7.86 @ 89.1mph, 1.61 60 foot N/A 7.20 @ 98.8MPH 1.55 60 foot on spray Stock Longblock with Cams |
|
|
|
#186 | |
|
Hardcore Enthusiast
2004 Mustang GT
11.463@121.50
Join Date: Jun 2007
Location: SE PA
Posts: 1,644
![]() ![]() iTrader: 1 reviews
|
This is Jim (I run at Atco) with the redfire 2004 Mustang GT Vortech non-intercooled w/ the black hoodscoop. Hey, I posted a video of you at the Ford vs. Buick day, on Youtube. BTW, nice run breaking into the tens!!! How much extra hp do you think I'll need to get my car from a best of 11.49 to 10.99??? I dyno'd at 451rwhp STD corrected.
__________________
MM Bracket Racing Crew Member #5 |
|
|
|
|
#187 |
|
Regular
Join Date: Dec 2009
Posts: 204
![]() ![]() iTrader: 0 reviews
|
Two new bests from this past Saturday... 10.804 & 10.759!
__________________
302 stroker @ 9.3:1, stock heads, VCT lockouts. 3.73's M&H 325/50/15 DR's. J&M Extreme LCA's, JPC race UCA. Kooks 1 3/4" LT's with 3" O/R H. 10.759 @ 125mph with E-Force with 3" pulley. Tuned by Manuel from TUDYNO. |
|
|
|
#188 | |
|
Regular
Join Date: Dec 2009
Posts: 204
![]() ![]() iTrader: 0 reviews
|
__________________
302 stroker @ 9.3:1, stock heads, VCT lockouts. 3.73's M&H 325/50/15 DR's. J&M Extreme LCA's, JPC race UCA. Kooks 1 3/4" LT's with 3" O/R H. 10.759 @ 125mph with E-Force with 3" pulley. Tuned by Manuel from TUDYNO. |
|
|
|
|
#189 |
|
I Post Entirely Way Too Much
2004,1994,1967
14.37 @ 96
Join Date: Aug 2008
Location: Texas
Posts: 5,975
![]() ![]() ![]() iTrader: 1 reviews
|
Whatever dont lie !!!
First one you did an 18 and the second you were so damn slow the clock ran out :p |
|
|
|
#190 |
|
Regular
06 mustang GT
12.8
Join Date: Aug 2008
Location: Pennsburg, PA
Posts: 310
![]() iTrader: 0 reviews
|
Also dont have a pic, but my fastest 1/4 is a 12.7 now. 60 foot was a high 1.9 and my mph was 111. This was on street tires and at a track way above sea level. This was also before the full exhaust was on the car haha.
__________________
2006 Mustang GT 5-Speed,4:10 gears, Predator cold air and tune, SLP loudmouth exhaust,kooks LTs and Xpipe 275 street tires, FRPP hot rod cams, mgw STS, 1/2 inch drop,285drag radials, Steeda UDP's, 100 shot. |
|
|
|
#191 |
|
Newbie
Join Date: Oct 2011
Posts: 18
![]() iTrader: 0 reviews
|
We went 5.30@136 1.27 60' 1/8th
That was our last pass of the season. Vid in sig
__________________
S/N 95 Mustang 362CI 91MM Turbo 10.5" Drag Radials, Powerglide Revmax 4200 stall custom 9.5" billet converter http://www.youtube.com/watch?v=HfacFiI0yrY |
|
|
|
#192 | |
|
I Post Entirely Way Too Much
2004,1994,1967
14.37 @ 96
Join Date: Aug 2008
Location: Texas
Posts: 5,975
![]() ![]() ![]() iTrader: 1 reviews
|
So my 2.15 better drop with your converter. Speaking of I had a question on my order via email. |
|
|
|
|
#193 |
|
Lets Just Touch Tips.
91 fox
Join Date: Dec 2011
Location: Under your bed.
Posts: 553
![]() iTrader: 0 reviews
|
8.47 et
1.72 60ft 81 mph 1/8th mile. |
|
|
|
#194 |
|
I Post Entirely Way Too Much
2003 mustang v6 ;)
slow
Join Date: May 2010
Location: eglin afb florida
Posts: 10,197
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() iTrader: 2 reviews
|
havent gotten a clean pass off yet. still dialing in my suspension. it as gone 7.05 with 3.55's in the back in the 1/8th but i lost the slip.
03 cobra all stock front suspention with stock tires in the front hooser 26x10x15 drag slicks with 12# (tubeless) Performance: STOCK MOTOR O/R X PIPE MAC FLOWPATH CAT BACK BILLET FLOW IDLER LFP SBTB EVEN FLOW HEAD COOLING MOD WHIPPLE 2.9L SCT BA 3000 MAF MODIFIED FPDM 60# INJECTERS DUAL FORD GT FUEL PUMPS KB BAP LFP INTERCOOLER EXPANTION TANK DUAL BOSH INTERCOOLER PUMPS Suspension/Chassis: UPR AJUSTIBLE LOWER CONTROL ARMS UPR DOUBLE AJUSTIBLE UPPERS EDELBROCK SWAY BAR FOX BODY SPRINGS MOROSO 3 WAY AJUSTIBLE DRAG SHOCKS FULL LENGTH SUB FRAME CONNECTERS DRIVE SHAFT SAFTEY LOOP Drivetrain: SRA SWAP 3.55 GEARS DETROIT TRUE TRACK DIFF 31 SPLINE AXLES SPEC 3+ CLUTCH SPEC BILLET STEEL FLYWHEEL 26 SPLINE INPUT SHAFT STEEDA TRI-AX SHIFTER Electronics: SCT TUNER N2MB WOT SHIFT BOX RAPTOR SHIFT LIGHT these are the slips of my last time to the track, i drove like crap. my car was 03 ![]() this is a vid of a 7.1xx pass
__________________
![]() bone stock from the factory! |
|
|
|
#195 |
|
Premium Member
1969 Mustang Mach 1
6.824@101.61
Join Date: Aug 2006
Location: Oklahoma jackass, get to driving
Posts: 5,573
![]() ![]() ![]() ![]() ![]() ![]() iTrader: 0 reviews
|
New best motor pass.
![]() First nitrous pass. Let out early, as you can see by the trap speed. Right lane
__________________
./___ _ ____ ___ \. ( ]]] _ _ O _ _ [[[ ) \_ o _ _____ _ o _/ |___| ......... |___| http://www.youtube.com/watch?v=HyYU3...e_gdata_player |
|
|
|
#196 |
|
Regular
2008 Mustang Gt
11.4@119.9
Join Date: Aug 2008
Location: New Jersey
Posts: 119
![]() iTrader: 0 reviews
|
__________________
|
|
|
|
#197 |
|
Slow 3v
2007 Mustang GT
1/8-7.85@91MPH 1/4-12.10@115MPH
Join Date: May 2011
Location: Camden, SC/ Tampa, FL
Posts: 791
![]() iTrader: 0 reviews
|
New PB, still slow but something is something
60'-1.82 1/8-7.85@91 1/4-12.10@115
__________________
464WHP/438WTQ
Whipple S/Cer, 3.5in Pulley, BBR 93oct Extreme dyno tuned, Exedy Mach 500, Borla Type-S cat back, BBK headers, BBK X, BBR LCAs, BBR adj pan hard bar, Eibach Pro kit http://www.youtube.com/user/jpac811?feature=mhee ![]() |
|
|
|
#198 |
|
!FACEPLATED!
|
What mods?
nm: looked on thru computer and saw sig. very nice. That 1/8th mile is inspiring to me but you make more power past the 660 feet than I do
__________________
![]() MM Bracket Racing Crew Co-Founder ~Its a Drag Car, Not a Show Car~ LINK-->Custom Race Transmission Build<--LINK
|
|
|
|
#199 |
|
Slow 3v
2007 Mustang GT
1/8-7.85@91MPH 1/4-12.10@115MPH
Join Date: May 2011
Location: Camden, SC/ Tampa, FL
Posts: 791
![]() iTrader: 0 reviews
|
lol let me borrow your tire and rim set up please. These 1.8x 60's are killing me.
__________________
464WHP/438WTQ
Whipple S/Cer, 3.5in Pulley, BBR 93oct Extreme dyno tuned, Exedy Mach 500, Borla Type-S cat back, BBK headers, BBK X, BBR LCAs, BBR adj pan hard bar, Eibach Pro kit http://www.youtube.com/user/jpac811?feature=mhee ![]() |
|
|
|
#200 |
|
Premium Member
1969 Mustang Mach 1
6.824@101.61
Join Date: Aug 2006
Location: Oklahoma jackass, get to driving
Posts: 5,573
![]() ![]() ![]() ![]() ![]() ![]() iTrader: 0 reviews
|
What does your car weigh? We would have been a awesome race! Lol. I'm surprised that I 60' so much better than you, but you're already around me at 330', and I'm really surprised that I balckhalf better than you. You're still slightly ahead at the 1/8, but I edge it out in the end of the 1/4. I would have bet you would beat me out the back door. My race weight was 3600 lbs.
Nice run .
__________________
./___ _ ____ ___ \. ( ]]] _ _ O _ _ [[[ ) \_ o _ _____ _ o _/ |___| ......... |___| http://www.youtube.com/watch?v=HyYU3...e_gdata_player |
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
|
|
LinkBacks (?)
LinkBack to this Thread: http://www.moddedmustangs.com/forums/drag/42745-post-your-best-1-8-1-4-mile-timeslips.html
|
||||
| Posted By | For | Type | Date | |
| Kenne Bell Mustang vs Whipple Mustang- Video | This thread | Refback | June 4th, 2009 12:07 AM | |
| Bench race foxbody vs terminator - SVTPerformance | This thread | Refback | April 28th, 2009 01:54 PM | |
| Bench race foxbody vs terminator - SVTPerformance | This thread | Refback | August 9th, 2008 01:11 PM | |
Threads Similar to: Post Your Best 1/8 And 1/4 Mile Timeslips!
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1/4 mile | 94gtred | 94-95 | 4 | May 15th, 2007 04:02 PM |
| 1/4 mile # | acg | 5.0 Mustangs | 1 | April 19th, 2007 07:17 AM |
| 07 1/4 mile | FastBack71 | Modular Mustangs | 11 | February 7th, 2007 04:43 PM |
| est 1/4 mile | jred | 96-98 | 7 | January 14th, 2007 10:52 AM |
| Timeslips! | Tony_90fox | 5.0 Mustangs | 2 | October 14th, 2006 10:40 PM |