8.8 rearend.

gt_andy · May 14th, 2008, 01:00 PM

How much can it handle? When do most start to break? Is it worth it to replace after breaking the stock one or beef up before you break the stock one?

I got a 13.3 car on the stock rearend. A 4.10 will be going in next week. Im looking at doing 5K launches on a MT ET street drag tire on a 16in or 15in race rim (can't remember what size it is).

I have 87,XXX miles on the car

HMUSN · May 14th, 2008, 01:04 PM

you can break a stock 8.8 with just drag radials.

I would invest in a 31 spline set up.

gt_andy · May 14th, 2008, 01:06 PM

Befor I break it? or after?

If drag racing....Alum driveshaft??

BWAL09 · May 14th, 2008, 01:09 PM

you can build the stock 8.8 to hold over 900rwhp

HMUSN · May 14th, 2008, 01:09 PM

if your getting gears I would just do everything at the same time.. axles have to come out anyway.. might as well do it once the correct way.

gt_andy · May 14th, 2008, 01:27 PM

I dont know much about rear ends as you can tell. Would the axles be the only thing i'd want to replace?

HMUSN · May 14th, 2008, 01:28 PM

axles, bearings, differential, gears, diff cover.

gt_andy · May 14th, 2008, 01:38 PM

any idea about what it will all cost?

HMUSN · May 14th, 2008, 03:22 PM

axles
Girdle (diff cover)

everything else

itschristorres8 · May 14th, 2008, 10:53 PM

i'd build it...v6 on the juice with slicks broke her running a 13.0
with drags and with ET's which is like right next to a slick i'd say once you hit 12s your in the danger zone

psycho bob · May 16th, 2008, 02:44 PM

of course mine is a bit newer, but i'm in the 12.8's on mt et streets and have no problems with 5k launches

MustangMatt96GT · May 16th, 2008, 04:24 PM

u also have 31 spline already. all 05+ mustangs are 31 spline.

May 14th, 2008, 01:00 PM	#1
gt_andy Regular 2000 Mustang GT 13.30 Join Date: Oct 2007 Location: Toledo, OH Posts: 103	8.8 rearend. How much can it handle? When do most start to break? Is it worth it to replace after breaking the stock one or beef up before you break the stock one? I got a 13.3 car on the stock rearend. A 4.10 will be going in next week. Im looking at doing 5K launches on a MT ET street drag tire on a 16in or 15in race rim (can't remember what size it is). I have 87,XXX miles on the car __________________ 2000 Ford Mustang GT 5spd (TOY) 1994 Ford Tunderbird LX = Daily Driver AIM: AndyGT46L http://www.myspace.com/andybhs Check me out!

May 14th, 2008, 01:06 PM	#3
gt_andy Regular 2000 Mustang GT 13.30 Join Date: Oct 2007 Location: Toledo, OH Posts: 103	Befor I break it? or after? If drag racing....Alum driveshaft?? __________________ 2000 Ford Mustang GT 5spd (TOY) 1994 Ford Tunderbird LX = Daily Driver AIM: AndyGT46L http://www.myspace.com/andybhs Check me out!

May 14th, 2008, 01:27 PM	#6
gt_andy Regular 2000 Mustang GT 13.30 Join Date: Oct 2007 Location: Toledo, OH Posts: 103	I dont know much about rear ends as you can tell. Would the axles be the only thing i'd want to replace? __________________ 2000 Ford Mustang GT 5spd (TOY) 1994 Ford Tunderbird LX = Daily Driver AIM: AndyGT46L http://www.myspace.com/andybhs Check me out!

May 14th, 2008, 01:38 PM	#8
gt_andy Regular 2000 Mustang GT 13.30 Join Date: Oct 2007 Location: Toledo, OH Posts: 103	any idea about what it will all cost? __________________ 2000 Ford Mustang GT 5spd (TOY) 1994 Ford Tunderbird LX = Daily Driver AIM: AndyGT46L http://www.myspace.com/andybhs Check me out!

May 14th, 2008, 10:53 PM	#10
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,501	i'd build it...v6 on the juice with slicks broke her running a 13.0 with drags and with ET's which is like right next to a slick i'd say once you hit 12s your in the danger zone __________________ TMA Turbo's Race kit ported heads and intakes-CRT performance- www.crtperformance.webs.com !! reground 216/216 camshaft .580-.600 springs- RPM 5.8psi goal-340-360rwhp boost control-10psi or under goal-400rwhp!! yeah on a v6

May 16th, 2008, 02:44 PM	#11
psycho bob Hardcore Enthusiast 07 MUSTANG GT 12.86@104 Join Date: Aug 2006 Location: Ft. Hood, TX/ Tulsa, OK Posts: 1,825	of course mine is a bit newer, but i'm in the 12.8's on mt et streets and have no problems with 5k launches __________________ JLT CAI, SCT Tuner, Eibach Pro Kit, Tokico D-specs, BMR LCA's, Adj. Panhard bar and support, Steeda Tri Axe w/ pistol grip, FRPP X-pipe, SLP loudmouths, Konig Beyond w/ BFG KDW's, MT ET Streets for the track. 12.86 in the 1/4 so far.

May 16th, 2008, 04:24 PM	#12
MustangMatt96GT I Post Entirely Way Too Much 1996 Mustang GT 19.090@71.46 Join Date: Dec 2006 Location: Lakewood, CO Posts: 6,912	u also have 31 spline already. all 05+ mustangs are 31 spline. __________________ If you are not willing to stand behind our troops, please feel free to go stand in front of them! If "drifting" were really racing, they'd have a track for it"

Threads Similar to: 8.8 rearend.
Thread	Thread Starter	Forum	Replies	Last Post
Independent rearend for a solid rearend	99cobradroptop	Trade	13	February 26th, 2008 09:34 AM
What rearend does my 89 gt have	White 89	5.0 Mustangs	5	October 4th, 2007 04:56 PM
Rearend ??	Stang6899	V6 Mustangs	6	September 21st, 2007 06:47 PM
what rearend should i use?	etony89	5.0 Mustangs	26	May 26th, 2007 07:59 PM
9 in rearend?	solareclpse2000	5.0 Mustangs	7	January 9th, 2007 09:25 AM

All times are GMT -4. The time now is 03:28 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.