Better but still cant break 9 sec

gragra73 · May 18th, 2008, 07:45 PM

Raced at Barona today. I think temp and elevation played a factor. It was 95 and the elevation is 1600'. At 1600' that is about a loose of 15-16 hp. Here is my best run

R/T .943
60' 2.158
1/8 mile 9.328
MPH 77.304

The BFG KDWs seemed to hook better than the Nitto 450 extremes

JohnC · May 18th, 2008, 08:01 PM

Not bad. Maybe work on those 60ft's a bit more and you'll lose another tenth or two.

I cut 2.04 60ft's when I drop the goodyear skatrbacks down to 15psi. If I have anymore air than that, I just spin all day.

leebunnyz · May 18th, 2008, 08:01 PM

aww i thought you were trying to run 9's in the 1/4! damn deceptive thread titles.

gragra73 · May 18th, 2008, 08:12 PM

My 60' times are improving. Last time at the track my 60' times were 2.4 to 2.6 range. Today there were in the 2.158 to 2.444 range.

gragra73 · May 19th, 2008, 08:40 PM

My corrected sea level time may be better than I thought. The density altitude at the strip yesterday was around 4300' my actual time would have been around 8.834. 9.328 x.9471 (alt. correction factor)

May 18th, 2008, 07:45 PM	#1
gragra73 Regular Join Date: Feb 2008 Posts: 332	Better but still cant break 9 sec Raced at Barona today. I think temp and elevation played a factor. It was 95 and the elevation is 1600'. At 1600' that is about a loose of 15-16 hp. Here is my best run R/T .943 60' 2.158 1/8 mile 9.328 MPH 77.304 The BFG KDWs seemed to hook better than the Nitto 450 extremes Last edited by gragra73 : May 18th, 2008 at 07:55 PM.

May 18th, 2008, 08:01 PM	#2
JohnC Regular 1997 Mustang GT 13.56@102.94 Join Date: Oct 2007 Location: Murfreesboro and Old Hickory, TN Posts: 338	Not bad. Maybe work on those 60ft's a bit more and you'll lose another tenth or two. I cut 2.04 60ft's when I drop the goodyear skatrbacks down to 15psi. If I have anymore air than that, I just spin all day. __________________ 1997 Mustang GT Aluminum Block PI swap & 4R70W to TR3550 swapped. Best 1/8: 2.04 60ft 8.74@81.85 & Best 1/4: 2.04 60ft 13.56@102.94 all on stock 245-17's My Garage

May 18th, 2008, 08:01 PM	#3
leebunnyz Hardcore Enthusiast Join Date: Feb 2007 Location: Vineland, NJ Posts: 2,458	aww i thought you were trying to run 9's in the 1/4! damn deceptive thread titles. __________________ Not stock RADMUSTANGS Hurst Crew member #1 of 21 "The Founder Of Crews"

Threads Similar to: Better but still cant break 9 sec
Thread	Thread Starter	Forum	Replies	Last Post
13 Sec 2002 GT	mystang0673	For Sale	12	November 16th, 2007 11:28 PM
8 sec. Mustang	theninja	Videos	4	August 18th, 2007 04:00 PM
9 sec v6	94v6blkndred	V6 Mustangs	16	July 9th, 2007 10:37 PM
14 sec v6	stanged out	V6 Mustangs	21	April 20th, 2007 10:13 PM
9 Sec GT500	drgnracin72	The Clubhouse	20	November 22nd, 2006 01:04 PM

May 18th, 2008, 08:12 PM	#4
gragra73 Regular Join Date: Feb 2008 Posts: 332	My 60' times are improving. Last time at the track my 60' times were 2.4 to 2.6 range. Today there were in the 2.158 to 2.444 range.

May 19th, 2008, 08:40 PM	#5
gragra73 Regular Join Date: Feb 2008 Posts: 332	My corrected sea level time may be better than I thought. The density altitude at the strip yesterday was around 4300' my actual time would have been around 8.834. 9.328 x.9471 (alt. correction factor)

All times are GMT -4. The time now is 09:26 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.