Aluminum Driveshaft

Regency 2007 · February 4th, 2008, 08:19 PM

I bought this aluminum driveshaft new for $700 and it stayed on the car for 2,000 miles. Besides a couple rings in it from where it rubbed the loops it is in perfect shape.

Will sell for $550 or your offer

joeice14 · February 4th, 2008, 08:45 PM

Honestly I dont know the purpose of one and the gains and if its for a manual or Auto tranny....

((((( ^_^ )))))

Luis_GT · February 4th, 2008, 08:54 PM

less rotating mass = faster acceleration... it drops about 3 tenths of a sec on the 1/4... maybe more

Regency 2007 · February 4th, 2008, 08:55 PM

the purpose is to lose ALOT of weight off the stock shaft. Also this is a one piece shaft instead of 2 joined shafts on the stock shaft.

These give you anywhere from 10-15rwhp, more gas mileage, and can handle more power. Stock shaft can only handle about 380hp

Montanasvt · February 4th, 2008, 09:06 PM

what does it go on ... 05 + ?

07 procharger · February 4th, 2008, 09:09 PM

man....i can make that...I know it!!!

Regency 2007 · February 4th, 2008, 09:10 PM

05 and up mustangs

Regency 2007 · February 4th, 2008, 09:11 PM

Originally Posted by 07 procharger

man....i can make that...I know it!!!

BS

You know you want to buy it

.2-.3 sec off your quartermile

Luis_GT · February 4th, 2008, 09:13 PM

Damn... it's either that or a CAI... GRRRR!

I bet shipping here would be expensive though...

Regency 2007 · February 4th, 2008, 09:18 PM

A pic from the other end to show you how well made this thing is

Regency 2007 · February 4th, 2008, 09:20 PM

Originally Posted by Luis_GT

Damn... it's either that or a CAI... GRRRR!

I bet shipping here would be expensive though...

Where do you live? I have changed it to $550 shipped

GT33 · February 4th, 2008, 09:31 PM

were do u live and ill buy for $300

Regency 2007 · February 4th, 2008, 09:34 PM

Originally Posted by GT33

were do u live and ill buy for $300

Sorry, $550 shipped is as low as I will go. Live in TEN.

Although I will sell for $500 if the buyer comes to pick it up

BWAL09 · February 4th, 2008, 09:37 PM

nice shaft.

nba1341 · February 5th, 2008, 01:54 AM

Originally Posted by BWAL09

nice shaft.

joeice14 · February 5th, 2008, 02:46 AM

I want it now....

This sucks I have too much food on my plate and not enough juice to wash it down...

Regency 2007 · February 7th, 2008, 11:19 AM

$525 shipped

vfast · February 7th, 2008, 05:34 PM

the reason the car was faster is because he was 700 dollars lighter.....for that amt you can be 1 sec faster

February 4th, 2008, 08:19 PM	#1
Regency 2007 Hardcore Enthusiast iTrader: 0 / 0% Join Date: May 2007 Posts: 1,136	Aluminum Driveshaft I bought this aluminum driveshaft new for $700 and it stayed on the car for 2,000 miles. Besides a couple rings in it from where it rubbed the loops it is in perfect shape. Will sell for $550 or your offer __________________ *Gun Owners of Modded Mustangs*

February 4th, 2008, 08:45 PM	#2
joeice14 Hardcore Enthusiast iTrader: 2 / 100% 2006 Mustang GT Join Date: Oct 2006 Location: new york Posts: 1,169	Honestly I dont know the purpose of one and the gains and if its for a manual or Auto tranny.... ((((( ^_^ ))))) __________________ <--- The Old V6 C&L True Flow Racer Intake, Xcal 3 w/ (93 Octane Race Tune), Mishimoto Radiator, Eibach Pro-Kit, MAC Lts, MAC O/R Prochamber, Hurst Shifter Support our own Suppliers: www.Radmustangs.com www.s197performance.com/

February 4th, 2008, 08:55 PM	#4
Regency 2007 Hardcore Enthusiast iTrader: 0 / 0% Join Date: May 2007 Posts: 1,136	the purpose is to lose ALOT of weight off the stock shaft. Also this is a one piece shaft instead of 2 joined shafts on the stock shaft. These give you anywhere from 10-15rwhp, more gas mileage, and can handle more power. Stock shaft can only handle about 380hp __________________ *Gun Owners of Modded Mustangs*

February 4th, 2008, 09:06 PM	#5
Montanasvt Regular iTrader: 0 / 0% 01 Cobra Join Date: Oct 2007 Location: Macon, Ga Posts: 363	what does it go on ... 05 + ? __________________

February 4th, 2008, 09:10 PM	#7
Regency 2007 Hardcore Enthusiast iTrader: 0 / 0% Join Date: May 2007 Posts: 1,136	05 and up mustangs __________________ *Gun Owners of Modded Mustangs*

February 4th, 2008, 09:18 PM	#10
Regency 2007 Hardcore Enthusiast iTrader: 0 / 0% Join Date: May 2007 Posts: 1,136	A pic from the other end to show you how well made this thing is __________________ *Gun Owners of Modded Mustangs*

February 4th, 2008, 09:31 PM	#12
GT33 Regular iTrader: 0 / 0% Join Date: Jul 2007 Posts: 236	were do u live and ill buy for $300

February 5th, 2008, 02:46 AM	#16
joeice14 Hardcore Enthusiast iTrader: 2 / 100% 2006 Mustang GT Join Date: Oct 2006 Location: new york Posts: 1,169	I want it now.... This sucks I have too much food on my plate and not enough juice to wash it down... __________________ <--- The Old V6 C&L True Flow Racer Intake, Xcal 3 w/ (93 Octane Race Tune), Mishimoto Radiator, Eibach Pro-Kit, MAC Lts, MAC O/R Prochamber, Hurst Shifter Support our own Suppliers: www.Radmustangs.com www.s197performance.com/

February 7th, 2008, 11:19 AM	#17
Regency 2007 Hardcore Enthusiast iTrader: 0 / 0% Join Date: May 2007 Posts: 1,136	$525 shipped __________________ *Gun Owners of Modded Mustangs*

February 7th, 2008, 05:34 PM	#18
vfast Enthusiast iTrader: 0 / 0% Join Date: Aug 2005 Location: in my 2020 v-16 camaro Posts: 766	the reason the car was faster is because he was 700 dollars lighter.....for that amt you can be 1 sec faster __________________ EVERYONE IS ENTITLED TO MY OPINION v-6's are for kidsL clubs are ghey 1965 chevelle SS 421 sbc PG trans 3500 stall 4;10 gears,alum d-shaft, brodix heads,roller cam,925 AED carb...grocery getter

Threads Similar to: Aluminum Driveshaft
Thread	Thread Starter	Forum	Replies	Last Post
Aluminum D/S (driveshaft)	chris1	99-04	17	November 17th, 2007 11:26 AM
aluminum driveshaft	03TropicGt	99-04	27	November 4th, 2007 01:16 AM
ALuminum Driveshaft	USARMY1983	5.0 Mustangs	0	April 13th, 2007 11:51 AM
aluminum driveshaft	stepfaster2000	Drivetrain	9	April 4th, 2007 06:34 PM
Aluminum Driveshaft	homebrewed	5.0 Mustangs	16	March 3rd, 2007 12:01 AM

All times are GMT -4. The time now is 02:55 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.