Getting My Clutch Quadrant, Adjustable Clutch Cable and

97Cobra · April 28th, 2007, 11:45 PM

Firewall Adjuster

ok so since this is gonna be my 1st Quadrant job, how would I go about installing it? lol and how about the firewall adj. aswell...lol it looks like this is gonna be a pain! just because im big n its damn tight down there. lol
heres the kit...
http://www.americanmuscle.com/noname3.html

any help would be awesome!
Thanks!

97Cobra · April 30th, 2007, 10:54 AM

.....???

Racinjason81 · May 2nd, 2007, 12:51 PM

you might want to remove the DS seat and make it a whole lot easier
if the quadrant is already stripped pull out the cotter pin and remove or
if necassary break the plastic quadrant off the pedal assy.it should slide off.you can get rid of the springs from the automatic adjuster on the quadrant.Replace it with the aluminum quad.by lining up the holes and install the spacers and the cotter pin.while your under the dash you should
snug the 18mm nut where the clutch pedal pivots on

97Cobra · May 2nd, 2007, 02:33 PM

ok will do thanks! do you know about the cable n firewall adjuster?

April 28th, 2007, 11:45 PM	#1
97Cobra I Post Entirely Way Too Much 1997 Mustang Cobra 1/8 - 8.89@86mph Join Date: Jan 2006 Location: Wyoming Posts: 6,518	Getting My Clutch Quadrant, Adjustable Clutch Cable and Firewall Adjuster ok so since this is gonna be my 1st Quadrant job, how would I go about installing it? lol and how about the firewall adj. aswell...lol it looks like this is gonna be a pain! just because im big n its damn tight down there. lol heres the kit... http://www.americanmuscle.com/noname3.html any help would be awesome! Thanks! __________________ Modifications and pics in my Garage... Reps Appreciated!

April 30th, 2007, 10:54 AM	#2
97Cobra I Post Entirely Way Too Much 1997 Mustang Cobra 1/8 - 8.89@86mph Join Date: Jan 2006 Location: Wyoming Posts: 6,518	.....??? __________________ Modifications and pics in my Garage... Reps Appreciated!

May 2nd, 2007, 12:51 PM	#3
Racinjason81 Hardcore Enthusiast Join Date: Feb 2007 Location: New jersey Posts: 1,199	you might want to remove the DS seat and make it a whole lot easier if the quadrant is already stripped pull out the cotter pin and remove or if necassary break the plastic quadrant off the pedal assy.it should slide off.you can get rid of the springs from the automatic adjuster on the quadrant.Replace it with the aluminum quad.by lining up the holes and install the spacers and the cotter pin.while your under the dash you should snug the 18mm nut where the clutch pedal pivots on __________________ Speed kills drive an import and live forever. 1991 LX 5.0 H/B 1990 T-BIRD SC

May 2nd, 2007, 02:33 PM	#4
97Cobra I Post Entirely Way Too Much 1997 Mustang Cobra 1/8 - 8.89@86mph Join Date: Jan 2006 Location: Wyoming Posts: 6,518	ok will do thanks! do you know about the cable n firewall adjuster? __________________ Modifications and pics in my Garage... Reps Appreciated!

Threads Similar to: Getting My Clutch Quadrant, Adjustable Clutch Cable and
Thread	Thread Starter	Forum	Replies	Last Post
CLUTCH AND CLUTCH CABLE MAJOR PROBLEMS	Hububula	5.0 Mustangs	3	May 28th, 2007 10:08 AM
Clutch Cable \ Quadrant Help Needed	jrhurst	Modular Mustangs	4	April 12th, 2007 02:02 AM
Clutch Quadrant	RC02GT	99-04	1	March 8th, 2007 03:46 AM
88 5.0 LX Clutch Quadrant	88LX5.0	5.0 Mustangs	6	September 29th, 2006 08:34 PM
Steeda Clutch Adjustment Quadrant, Cable, Firewall Adjuster.	fallstar01	Parts	1	November 8th, 2005 09:24 PM

All times are GMT -4. The time now is 02:04 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.