3.08 to 4.10 attempt install or no?

FivePointSlow777 · May 5th, 2008, 11:35 PM

Im running the stock 3.08 gears in my rear right now but I have a set of 4.10 gears in my room waiting, should I do the install or should I take it to a shop, if so anyone know a good shop in upstate NY area, I havent been around in about 5 years. Im running a T-5 right now but I loved them in my auto, the tires just dont break loose like the auto.

04DSGV6 · May 5th, 2008, 11:54 PM

Any experience with this? Improper install can cause whining at best most likely worse.

mr boogeyman · May 6th, 2008, 03:39 PM

Also you have to have the right tools and it can get expensive..It all depends on how much they want to charge you in your area versus doing it yourself. Its not really hard just time consuming and using specific tools

Racinjason81 · May 12th, 2008, 10:41 PM

it will probably cost around 300-400 bucks to install the gears,you should get an installation kit($100) too

May 5th, 2008, 11:35 PM	#1
FivePointSlow777 Newbie 1993 Mustang GT Join Date: May 2008 Location: Caledonia, New York Posts: 24	3.08 to 4.10 attempt install or no? Im running the stock 3.08 gears in my rear right now but I have a set of 4.10 gears in my room waiting, should I do the install or should I take it to a shop, if so anyone know a good shop in upstate NY area, I havent been around in about 5 years. Im running a T-5 right now but I loved them in my auto, the tires just dont break loose like the auto.

May 12th, 2008, 10:41 PM	#4
Racinjason81 Hardcore Enthusiast Join Date: Feb 2007 Location: New jersey Posts: 1,198	it will probably cost around 300-400 bucks to install the gears,you should get an installation kit($100) too __________________ Speed kills drive an import and live forever. 1991 LX 5.0 H/B 1990 T-BIRD SC

Threads Similar to: 3.08 to 4.10 attempt install or no?
Thread	Thread Starter	Forum	Replies	Last Post
AmericanMuscle.com to Sponsor ECTA Land Speed Record Attempt	AMNick	American Muscle	4	March 5th, 2008 04:55 AM
I will now attempt to not log on MM for 1 week	nba1341	The Clubhouse	41	September 13th, 2007 04:49 PM
Thisis my last attempt	2000Mustang	V6 Mustangs	16	May 10th, 2007 04:27 PM
Fair attempt at a chop	JBIGBOOTSY	Chopshop	17	February 13th, 2007 10:47 AM
SERVICE ENGINE LIGHT Follows fuel filter change attempt	Temecula_GT	General Tech	3	December 23rd, 2006 12:51 AM

May 5th, 2008, 11:54 PM	#2
04DSGV6 Regular 2004 Mustang V6 Join Date: Oct 2007 Location: Chicago,IL Posts: 449	Any experience with this? Improper install can cause whining at best most likely worse.

May 6th, 2008, 03:39 PM	#3
mr boogeyman Newbie 2001 Mustang GT Auto Join Date: May 2008 Location: California Posts: 46	Also you have to have the right tools and it can get expensive..It all depends on how much they want to charge you in your area versus doing it yourself. Its not really hard just time consuming and using specific tools

All times are GMT -4. The time now is 04:58 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.