PIONEER SPEAKERS

PONYBOY14 · January 31st, 2007, 01:18 AM

SO ON MY 98 GT DO I NEED 6X8 OR 6X9? GONNA GET SOME PIONEERS I THINK. WILL THEY HAVE THE CONNECTORS AT WALMART? I CAN ALWAYS GO TO BEST BUY OR CIRCUIT CITY TO GET THEM. ANY IDEA HOW MUCH THEY ARE?

wraitherlx · January 31st, 2007, 11:11 PM

6x8 alll the way around unless you got a vert. The harnesses at best buy are $8 you will just need two packages cause there are 2 to a pack.

PONYBOY14 · January 31st, 2007, 11:27 PM

yea i got the mach 460 system. and the door speakers have been blown, so ima put the pioneers in it i think. unless... there's something a little cheaper that sounds better and can handle it.

wraitherlx · February 1st, 2007, 12:35 AM

are you going to be doing the installation yourself? are you replacing all 4 speakers? if you are doing the install it really isnt all that hard to do. when you take your door speakers out you will see a gray plug now if you look directly up towards your tweater you will see that same plug connected to the tweeter. That is the plug that you want to use but you will not be able to use your tweeters anymore. The reason being is that the doors on the mach are mids, and the tweeters put out full range sound. if you were to hook up your speakers to the 6x8 plug it will sound muffled. As far as the rear deck is concerned you cant place the new 6x8's in the amp rack for the mach so you will have to drop it. There are 6 bolts on top to the left and right and then the whole rack will drop just unplug it and your good to go just put the new speakers in and then thats it. I recommend either 3 or 4 ways up front and then 2 ways in the back. Good luck

PONYBOY14 · February 1st, 2007, 12:38 AM

YA. IT AIN'T HARD I ALREADY GOT THA SPEAKERS OUT, JUST GOTTA GET THE NEW ONES AND CONNECT THA WIRES AND PUT EM IN.

AndyG47 · February 4th, 2007, 06:49 PM

Running Pioneer TS-6870R's all around. 3 way 6x8's @ 220 watts max.

I cut the factory plugs off and used butt splices / barrel connectors (whatever you call them) to hook up the Pioneers.

January 31st, 2007, 01:18 AM	#1
PONYBOY14 Regular Join Date: Jan 2007 Posts: 52	PIONEER SPEAKERS SO ON MY 98 GT DO I NEED 6X8 OR 6X9? GONNA GET SOME PIONEERS I THINK. WILL THEY HAVE THE CONNECTORS AT WALMART? I CAN ALWAYS GO TO BEST BUY OR CIRCUIT CITY TO GET THEM. ANY IDEA HOW MUCH THEY ARE?

January 31st, 2007, 11:27 PM	#3
PONYBOY14 Regular Join Date: Jan 2007 Posts: 52	ok yea i got the mach 460 system. and the door speakers have been blown, so ima put the pioneers in it i think. unless... there's something a little cheaper that sounds better and can handle it.

February 4th, 2007, 06:49 PM	#6
AndyG47 Regular Join Date: Jan 2007 Location: J-Town, NJ Posts: 88	Running Pioneer TS-6870R's all around. 3 way 6x8's @ 220 watts max. I cut the factory plugs off and used butt splices / barrel connectors (whatever you call them) to hook up the Pioneers. __________________ 1999 Explorer Sport - Shackled 2002 Mustang 3.8L V6 Auto - Ebay CAI with Green Performance filter, BBK Shorties, Pypes X, GT duals, Sony amp and 12" sub SEE IT HERE! Updated Nov 2007

Threads Similar to: PIONEER SPEAKERS
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer sirius sat. direct tuner	VSR13	For Sale	1	October 2nd, 2007 11:43 PM
Pioneer AVIC-Z2	Youngin	Electronics	3	May 15th, 2007 02:30 PM
Pioneer AVIC-N3	Ando32205	Electronics	7	April 23rd, 2007 01:29 PM
Pioneer radio install in 98 gt with mach 460	98gtmike	Electronics	5	March 3rd, 2007 09:49 PM
Pioneer in dash dvd player	wraitherlx	Audio/Electronics	7	February 11th, 2007 01:19 AM

January 31st, 2007, 11:11 PM	#2
wraitherlx Enthusiast 99 Cobra Join Date: Nov 2006 Location: Virginia Beach, VA Posts: 683	6x8 alll the way around unless you got a vert. The harnesses at best buy are $8 you will just need two packages cause there are 2 to a pack.

February 1st, 2007, 12:35 AM	#4
wraitherlx Enthusiast 99 Cobra Join Date: Nov 2006 Location: Virginia Beach, VA Posts: 683	are you going to be doing the installation yourself? are you replacing all 4 speakers? if you are doing the install it really isnt all that hard to do. when you take your door speakers out you will see a gray plug now if you look directly up towards your tweater you will see that same plug connected to the tweeter. That is the plug that you want to use but you will not be able to use your tweeters anymore. The reason being is that the doors on the mach are mids, and the tweeters put out full range sound. if you were to hook up your speakers to the 6x8 plug it will sound muffled. As far as the rear deck is concerned you cant place the new 6x8's in the amp rack for the mach so you will have to drop it. There are 6 bolts on top to the left and right and then the whole rack will drop just unplug it and your good to go just put the new speakers in and then thats it. I recommend either 3 or 4 ways up front and then 2 ways in the back. Good luck

February 1st, 2007, 12:38 AM	#5
PONYBOY14 Regular Join Date: Jan 2007 Posts: 52	YA. IT AIN'T HARD I ALREADY GOT THA SPEAKERS OUT, JUST GOTTA GET THE NEW ONES AND CONNECT THA WIRES AND PUT EM IN.

All times are GMT -4. The time now is 12:35 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.