My Center Console...

ChrisJ · July 4th, 2007, 03:05 PM

Some you guys ahve asked to see it so i figured I would make a post over here...

I finally took a night shot as well...Its from my cell phone so its not great...

Autometer Lunar Gauge Cluster
Autometer Lunar Boost Gauge
Autometer Lunar Fuel Pressure Gauge
Innovative XD-16/LC-1 Wideband
Pioneer AVH6800 6 DVD in Dash Touchscreen

Feel free to ask any questions you might have...

tlr96 · July 4th, 2007, 04:13 PM

damn man i wish they made that gauge cluster for my car cause it looks sweet! ... that would'nt fit in my car would it?

ChrisJ · July 4th, 2007, 04:24 PM

Originally Posted by tlr96

damn man i wish they made that gauge cluster for my car cause it looks sweet! ... that would'nt fit in my car would it?

The gauge cluster is for electric speed sensors...No cabes...I dont thin they make them for the pre-99's...

CobraR · July 4th, 2007, 06:36 PM

dang! i like that touch screen. i was thinkin bout getting it. how much was it and was it hard to put in?

ChrisJ · July 4th, 2007, 06:40 PM

Originally Posted by CobraR

dang! i like that touch screen. i was thinkin bout getting it. how much was it and was it hard to put in?

Its around $1000 and it is cake to install...All you need is the "merta adapter wiring harness" and it takes about 30 mintes to and hour to do...

energiesource · July 4th, 2007, 09:25 PM

Thanks for the pics
now actually doing it is gunna suck

ChrisJ · July 4th, 2007, 09:32 PM

Originally Posted by energiesource

Thanks for the pics
now actually doing it is gunna suck

Post a picture of yours and i can try and help you do the swap...

itschristorres8 · July 5th, 2007, 02:45 AM

where'd you get the gauges cluster and how much
looks nice!

ChrisJ · July 5th, 2007, 10:51 AM

Originally Posted by itschristorres8

where'd you get the gauges cluster and how much
looks nice!

I bought it off of a forum...

You can find a decent one if you are lucky for $350 or so...I have seen them go for alot more...they are discountinued and have been for a while...

Tony_90fox · July 6th, 2007, 05:57 AM

Looks friggin sweet Chris. How hard was the wideband install? I am thinking about one for my beast. lol
What all is involved and what brand do you suggest?

G.T. Rags · July 14th, 2007, 05:08 PM

wow dude, u did such a good job wit that. It almost looks factory. Seriously, all i can say is WOW

ChrisJ · July 14th, 2007, 05:12 PM

Originally Posted by 96GTRagTop

wow dude, u did such a good job wit that. It almost looks factory. Seriously, all i can say is WOW

Thank you...

It was pretty easy...

ChrisJ · July 17th, 2007, 06:51 PM

I used this adapter to make my aftermarket headunit work with the Mach 460...

Click Here

It also works for the 2002 as well...

The 03/04 Need another adapter...

Here is the Adapter For The 03/04...

Click Here

All you need to do is wiore it up to your headunit and plug the RCA cables into your headunitrs RCA jacks and you are good to go...

FOR POINT SIX · July 18th, 2007, 03:30 PM

Originally Posted by METRA

Product Description
This innovative product for car radio installations allows the installer to wire an aftermarket radio into a car without cutting and splicing the factory radio harness. Ford 2000-2001 amplifier integrator plug Mustang with Mach 460 2001, Lincoln LS 2000 Turbowires™ have been color-coded using the aftermarket radio industry standard (E.I.A. Color Code). Features a high impact, OEM quality, ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. All top quality design features. A handy chart on the back of the package allows you to easily make all of the radio's wire connections.

So this harness will let the factory amp run the speakers with a aftermarket head unit

ChrisJ · July 18th, 2007, 03:51 PM

Originally Posted by FOR POINT SIX

Originally Posted by METRA

Product Description
This innovative product for car radio installations allows the installer to wire an aftermarket radio into a car without cutting and splicing the factory radio harness. Ford 2000-2001 amplifier integrator plug Mustang with Mach 460 2001, Lincoln LS 2000 Turbowires™ have been color-coded using the aftermarket radio industry standard (E.I.A. Color Code). Features a high impact, OEM quality, ABS plastic molded connector for the perfect fit, while the new GXL wire provides more flexibility, power handling and heat resistance. The precision hand assembled terminals are pressure-inserted into the plug making it virtually impossible to pull a wire out. All top quality design features. A handy chart on the back of the package allows you to easily make all of the radio's wire connections.

So this harness will let the factory amp run the speakers with a aftermarket head unit

Yep and it also works for 2002 as well...I used the same plug in my car...

They changed in 03...So 03/04 plug will not work on anything but 03/04...

Its an easy install...

If the person is local i am more then willing to help them out...

orangeRcode · July 18th, 2007, 03:54 PM

Looks very professional Chris. Is that your wideband on the lower pillar reading 15.1?

ChrisJ · July 18th, 2007, 04:03 PM

Originally Posted by orangeRcode

Looks very professional Chris. Is that your wideband on the lower pillar reading 15.1?

At idle it is 14.7 - 15.1

It rolls around there like that...But at WOT it is a nice 12.0...

Youngin · July 25th, 2007, 05:58 AM

wait a minute the unit comes with a 6disc cd changer?

ChrisJ · July 25th, 2007, 02:19 PM

Originally Posted by Youngin

wait a minute the unit comes with a 6disc cd changer?

It has a built in 6DVD/CD changer...

You push a button and the screen flips and it will le you put the DVD/CD in...It holds 6 of them...

coffinator6 · July 25th, 2007, 03:21 PM

I can't tell but did you modify the center console where your fog light, traction, and defrost switches are.

can you draw up a schematic for me so i know where to hook my wires to. I am planning on getting one just like yours.

I was looking at the alpine but its a 6.5 inch screen and your is a 7.

edit/ just did a quick search and found this as the second result. I believe this is you??

http://www.youtube.com/watch?v=Qm55WBzWFKo

July 4th, 2007, 03:05 PM	#1
ChrisJ "Slow Ass Car" 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Louisville, Kentucky Posts: 19,715	My Center Console... Some you guys ahve asked to see it so i figured I would make a post over here... I finally took a night shot as well...Its from my cell phone so its not great... Autometer Lunar Gauge Cluster Autometer Lunar Boost Gauge Autometer Lunar Fuel Pressure Gauge Innovative XD-16/LC-1 Wideband Pioneer AVH6800 6 DVD in Dash Touchscreen Feel free to ask any questions you might have... __________________ www.myspace.com/cjobe

July 4th, 2007, 04:13 PM	#2
tlr96 Hardcore Enthusiast 1996 Mustang GT Join Date: Mar 2007 Location: Effingham, IL Posts: 1,794	damn man i wish they made that gauge cluster for my car cause it looks sweet! ... that would'nt fit in my car would it? __________________ view my garage for pics and modifications listen to my exhaust video 1 video 2 video 3

July 4th, 2007, 09:25 PM	#6
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,048	Thanks for the pics now actually doing it is gunna suck __________________ 2000 Mustang GT, Steeda Triax shifter, Underdrive pulleys, SLP LM2, MAC L/T and O/R H-pipe. Transmission fix, new clutch Coming soon: Brakes.

July 5th, 2007, 02:45 AM	#8
itschristorres8 V-SICKS 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,657	where'd you get the gauges cluster and how much looks nice! __________________ The Devil & The Daily Daily-13.37@104.4mph V6- Stock bottom-439rwhp & 402rwtq 12psi 100oct built motor-497rwhp & 508rwtq 15psi pump

July 17th, 2007, 06:51 PM	#13
ChrisJ "Slow Ass Car" 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Louisville, Kentucky Posts: 19,715	I used this adapter to make my aftermarket headunit work with the Mach 460... Click Here It also works for the 2002 as well... The 03/04 Need another adapter... Here is the Adapter For The 03/04... Click Here All you need to do is wiore it up to your headunit and plug the RCA cables into your headunitrs RCA jacks and you are good to go... __________________ www.myspace.com/cjobe

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 6th, 2007, 05:57 AM	#10
Tony_90fox Banned Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,833	Looks friggin sweet Chris. How hard was the wideband install? I am thinking about one for my beast. lol What all is involved and what brand do you suggest?

July 18th, 2007, 03:54 PM	#16
orangeRcode Hardcore Enthusiast 11.22@123 -150 shot Join Date: May 2006 Location: Mustang/Yukon, OK Posts: 1,806	Looks very professional Chris. Is that your wideband on the lower pillar reading 15.1? __________________ http://www.moddedmustangs.com/forums/image-apic687.jpg

July 25th, 2007, 05:58 AM	#18
Youngin Hip Hop Artist Byebye V6~ Welcome Home New Pony :P Join Date: Nov 2006 Location: Californ-i-A Posts: 5,542	wait a minute the unit comes with a 6disc cd changer? __________________ ItaliStang Made.. Maybe Red But Makes One Hell Of A Sig http://www.myspace.com/moddedmustangz Modded Mustang's Song http://i30.tinypic.com/2en6byt.jpg

July 25th, 2007, 03:21 PM	#20
coffinator6 Enthusiast 03 GT, 92 coupe 2.3T Join Date: Feb 2007 Location: Choctaw. Oklahoma Posts: 974	I can't tell but did you modify the center console where your fog light, traction, and defrost switches are. can you draw up a schematic for me so i know where to hook my wires to. I am planning on getting one just like yours. I was looking at the alpine but its a 6.5 inch screen and your is a 7. edit/ just did a quick search and found this as the second result. I believe this is you?? http://www.youtube.com/watch?v=Qm55WBzWFKo

Threads Similar to: My Center Console...
Thread	Thread Starter	Forum	Replies	Last Post
No center console	JFPIMP91ELKLAND	5.0 Mustangs	2	August 24th, 2007 11:08 PM
center console	wadepetersen	V6 Mustangs	6	July 24th, 2007 09:20 AM
center console	wadepetersen	Visual	3	July 20th, 2007 08:57 PM
Center console gets really hot	ckjacobus	96-98	9	July 8th, 2007 10:11 PM
Center Console	hawaiianbrian78	V6 Mustangs	1	November 10th, 2006 12:08 AM

All times are GMT -4. The time now is 12:46 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.