what speed

homeboy2kfun · April 4th, 2008, 12:25 AM

ok so i hooked the white wire with an orange strip to the speed sensor and the avic D3 in nave menu - system - hardware info - 3D calibration there is no speed pulse (0).

Bullitt2445 · April 4th, 2008, 04:28 PM

Is it the one in te pass kick panel? If so, check to make sure you don't have more than one wire of that color and if so, check the other(s) for a correct connection. If needed, I will get a pic of my connection after the rain stops and Noah brings his Ark by...

homeboy2kfun · April 4th, 2008, 05:06 PM

That would be great thank you so much

Its the white orange wire

Could it be because i bypassed the avic d3

Bullitt2445 · April 4th, 2008, 05:13 PM

No, mine is bypassed as well, and that does not effect the speed readings, only allows for route inputs and viewing of DVDs while driving. Once the rain stops here in central Arkansas and the ground dries up enough, I will take a pic for you. It may be tomarrow, though. I have had 15.5" of rain at my house in the past two weeks. I'm ready to see the sun!

homeboy2kfun · April 5th, 2008, 04:23 AM

Ok thank you

my speed is pretty on it

but i have no speed pulse so if i lost gps im screwed

Bullitt2445 · April 5th, 2008, 12:53 PM

Not totally. The D3 (like all other Pioneer nav units) has a built in gyroscope. It measures even the slightest movement and can correct itself as you drive. The weather is really nice today, so I will try to get a pic today.

Bullitt2445 · April 5th, 2008, 03:15 PM

OK, here's the pics. In the first one you will see the location of the wire you need. I also dug a little and found another white/orange in a green plug, this is not the wire you need. That one you can kinda see in the second pic. If your white/orange is in the same location as mine, you may want to check how good the connection is.

homeboy2kfun · April 6th, 2008, 12:49 PM

ok so i tapped the write wires and know all i get is a speed pulse of 6 to 13 which makes my avuc think im going 25 to 45 at all times it never gos to zero or a consistent speed it jumps around.

Bullitt2445 · April 6th, 2008, 05:26 PM

Sounds more like a DC 5+ volt wire from the computer, not VSS. I would have one more look (just to be 110% sure) and maybe let a pro look at it. I know for me finding the VSS on some cars is almost impossible, and sometimes I have just let the install go without connecting it. Mazda 3 and Merc C230 come to mind, but most Mustangs have been fairly simple for me (or maybe just lucky).

April 4th, 2008, 12:25 AM	#1
homeboy2kfun Regular Join Date: Oct 2007 Posts: 70	what speed ok so i hooked the white wire with an orange strip to the speed sensor and the avic D3 in nave menu - system - hardware info - 3D calibration there is no speed pulse (0).

April 4th, 2008, 04:28 PM	#2
Bullitt2445 Regular 2001 Bullitt #02445 Join Date: Feb 2008 Location: Arkansas Posts: 164	Is it the one in te pass kick panel? If so, check to make sure you don't have more than one wire of that color and if so, check the other(s) for a correct connection. If needed, I will get a pic of my connection after the rain stops and Noah brings his Ark by... __________________ 2001 Bullit #02445 built in the only color Henry would build- Black.

April 4th, 2008, 05:13 PM	#4
Bullitt2445 Regular 2001 Bullitt #02445 Join Date: Feb 2008 Location: Arkansas Posts: 164	No, mine is bypassed as well, and that does not effect the speed readings, only allows for route inputs and viewing of DVDs while driving. Once the rain stops here in central Arkansas and the ground dries up enough, I will take a pic for you. It may be tomarrow, though. I have had 15.5" of rain at my house in the past two weeks. I'm ready to see the sun! __________________ 2001 Bullit #02445 built in the only color Henry would build- Black.

April 5th, 2008, 12:53 PM	#6
Bullitt2445 Regular 2001 Bullitt #02445 Join Date: Feb 2008 Location: Arkansas Posts: 164	Not totally. The D3 (like all other Pioneer nav units) has a built in gyroscope. It measures even the slightest movement and can correct itself as you drive. The weather is really nice today, so I will try to get a pic today. __________________ 2001 Bullit #02445 built in the only color Henry would build- Black.

April 5th, 2008, 03:15 PM	#7
Bullitt2445 Regular 2001 Bullitt #02445 Join Date: Feb 2008 Location: Arkansas Posts: 164	OK, here's the pics. In the first one you will see the location of the wire you need. I also dug a little and found another white/orange in a green plug, this is not the wire you need. That one you can kinda see in the second pic. If your white/orange is in the same location as mine, you may want to check how good the connection is. Attached Thumbnails __________________ 2001 Bullit #02445 built in the only color Henry would build- Black.

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

April 4th, 2008, 05:06 PM	#3
homeboy2kfun Regular Join Date: Oct 2007 Posts: 70	That would be great thank you so much Its the white orange wire Could it be because i bypassed the avic d3

April 5th, 2008, 04:23 AM	#5
homeboy2kfun Regular Join Date: Oct 2007 Posts: 70	Ok thank you my speed is pretty on it but i have no speed pulse so if i lost gps im screwed

April 6th, 2008, 12:49 PM	#8
homeboy2kfun Regular Join Date: Oct 2007 Posts: 70	ok so i tapped the write wires and know all i get is a speed pulse of 6 to 13 which makes my avuc think im going 25 to 45 at all times it never gos to zero or a consistent speed it jumps around.

April 6th, 2008, 05:26 PM	#9
Bullitt2445 Regular 2001 Bullitt #02445 Join Date: Feb 2008 Location: Arkansas Posts: 164	Sounds more like a DC 5+ volt wire from the computer, not VSS. I would have one more look (just to be 110% sure) and maybe let a pro look at it. I know for me finding the VSS on some cars is almost impossible, and sometimes I have just let the install go without connecting it. Mazda 3 and Merc C230 come to mind, but most Mustangs have been fairly simple for me (or maybe just lucky). __________________ 2001 Bullit #02445 built in the only color Henry would build- Black.

Threads Similar to: what speed
Thread	Thread Starter	Forum	Replies	Last Post
top speed	burnout5.0	94-95	33	February 15th, 2008 02:27 PM
Speed is everything	WAR-PARTY	The Clubhouse	16	February 6th, 2008 08:21 PM
Top Speed? And More...	Countryboy_99	94-95	14	August 27th, 2007 12:52 AM
top speed	232stang	V6 Mustangs	29	June 14th, 2007 02:17 AM
6 speed kit	2007calispecial	Modular Mustangs	1	May 29th, 2007 11:55 PM

All times are GMT -4. The time now is 03:08 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.