Forums at Modded Mustangs
Home Register FAQ Members List Calendar Blogs Garage Gallery Search Today's Posts Mark Forums Read


Go Back   Forums at Modded Mustangs > Mustang Forums > General Tech > Electronics

Discussing Try To Hook Up My Subs in the Electronics Forum. i got new mtx subs with a kenwood amp yesterday. tomarow i am going to ...

       

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

 
LinkBack Thread Tools
Old October 22nd, 2006, 12:41 AM   #1
Regular
 
 
Join Date: Jun 2006
Posts: 74
Default

Try To Hook Up My Subs


i got new mtx subs with a kenwood amp yesterday. tomarow i am going to atempt to hook it all up. any tips on where to run all the wires or where to mount the amp. etc.
 
Old October 22nd, 2006, 02:57 AM   #2
Enthusiast
 
97TunedMustang's Avatar
 
 
Join Date: Jan 2006
Posts: 963
Default

Run the power wire from the battery through driver side firewall and then down around kick panel. from there along the driver side door sill and then back around the rear seat into the trunk. if at all possible run the rca cables off the deck on the opposite side of the car to help with interference. ground the amp with no more then 3 feet of wire to a secure place within the trunk. You can mount the amp to the box or to the back of the seat. whichever you like or think will be easiest. Also make sure you wire the subs properly to get the most out of them based on your amplifier capabilities. this will be a big help if your unsure.

http://www.cardomain.com/shop/wooferwizard.pl

umm that was kinda quick there so mighta left stuff out. if you need any other help just ask and ill help ya with what i can.
__________________

New block with forged internals running 16psi, tuned by Lasota Racing
Too many mods to list...
3.73's and Truetrac Finally Done!
Water-methanol injection?
Dyno Tune fo sho, Street tune FTL!
 
Old October 22nd, 2006, 03:00 AM   #3
MuchCoolerThanGTsetGO
 
ChrisJ's Avatar
 
2002 Mustang GT
SLOW
 
Join Date: Jun 2006
Location: Shepherdsville, Kentucky
Posts: 16,246
Default

DOnt forget about the remote wire...

That seems to be the only thing you left out...
__________________
My Junk

www.myspace.com/cjobe

 
Old October 22nd, 2006, 03:47 AM   #4
Enthusiast
 
97TunedMustang's Avatar
 
 
Join Date: Jan 2006
Posts: 963
Default

i knew about. it just didnt bother mentioning cause there wasnt anything particulary special concering how its ran to the amplifier since its simply a 12v turn on lead. probably better to mention anyway. might as well cover everything.
__________________

New block with forged internals running 16psi, tuned by Lasota Racing
Too many mods to list...
3.73's and Truetrac Finally Done!
Water-methanol injection?
Dyno Tune fo sho, Street tune FTL!
 
Old October 22nd, 2006, 03:50 AM   #5
MuchCoolerThanGTsetGO
 
ChrisJ's Avatar
 
2002 Mustang GT
SLOW
 
Join Date: Jun 2006
Location: Shepherdsville, Kentucky
Posts: 16,246
Default

Yeah I just cover everything that way it cuts down on the chances of people messing up...

I have been doing installations for about 10 years now...For the past 4 it has been on the side...I have seen some people do some numbers on their stereo...
__________________
My Junk

www.myspace.com/cjobe

 
Old October 22nd, 2006, 08:57 PM   #6
Regular
 
mikethetigerrr's Avatar
 
 
Join Date: Oct 2006
Posts: 277
Default

i dont recomend mounting the amp to the box. i had an 1800 watt amp that a mounted on a box with 2 12's. after about a week the bass shook all the screws outta the amp and everytime i tightened em back up they would simply get shaken loose and the bass would go bye bye. basically, its just easier to mount to the back of the seat in the long run.
__________________
Originally Posted by 00GT MuscleBlack
it could be that you sucked a midget up your intake and now hes trying to get out...I would take the filter off
 
Old October 23rd, 2006, 02:46 AM   #7
MuchCoolerThanGTsetGO
 
ChrisJ's Avatar
 
2002 Mustang GT
SLOW
 
Join Date: Jun 2006
Location: Shepherdsville, Kentucky
Posts: 16,246
Default

Me personally I prefer making an amp rack for the amp...But that is just me...
__________________
My Junk

www.myspace.com/cjobe

 
Old October 26th, 2006, 12:01 AM   #8
Regular
 
320hpPony?'s Avatar
 
 
Join Date: May 2006
Location: jacksonville,FL
Posts: 188
Default

Mounting your amp to the box is also bad because if someone decides to steal ur shizit they get the subs,box,AND amp all in 1 swipe!
__________________
Yeah, its ugly, but hot damn its fast! Got 2 camaro SS's and 1 LT1 vette under mah belt in it!
 
Old October 26th, 2006, 08:44 PM   #9
Hardcore Enthusiast
 
psycho bob's Avatar
 
07 MUSTANG GT
12.86@104
 
Join Date: Aug 2006
Location: Ft. Hood, TX/ Tulsa, OK
Posts: 2,660
Default

Originally Posted by 320hpPony?
Mounting your amp to the box is also bad because if someone decides to steal ur shizit they get the subs,box,AND amp all in 1 swipe!
+1

make a flush mount panel for it so all you see is the top surface and no wires. this will look much better and more professional.
__________________

I just wanna go fast and I don't have enough stuff to do it.
 
Old October 26th, 2006, 10:50 PM   #10
Hardcore Enthusiast
 
 
Join Date: Sep 2006
Location: diberville,mississippi
Posts: 1,893
Default

yeah and you can raddle all the resistors inside out of place it creates alot of problems and i ran all my wires on just one side..
__________________
fraziers transmission service..
 
Old November 22nd, 2006, 12:56 PM   #11
Regular
 
scrapdaddy jr.'s Avatar
 
 
Join Date: Aug 2006
Location: in the eighth layer of hell. (florida)
Posts: 124
Default

i ran my power wire under the car and i took the plastic peice along the side skirt off, next i took the bottom part of the rear seat out and you should see a rubber peice, poke a hole in that and run your power wire up through that and zip tie the wire under the chassis, and put the plasic peice back on. doing this will prevent the carpet from catching on fire. then mount your amp to the back of the seat. also for your rca and remote wires, i would recommend running them through the center console, under the carpet and out behind the back. also connect your ground wire to the bolt holding up the backing of the rear seat. if u need some pics, pm me and i will get you some pics of my install. hope this helps.
__________________
 
Reply



Thread Tools


Threads Similar to: Try To Hook Up My Subs
Thread Thread Starter Forum Replies Last Post
will this hook up to my 96 blown96stang V6 Mustangs 16 October 7th, 2007 11:24 PM
Cant hook up ocsailor86 96-98 20 June 14th, 2007 12:02 AM
will not hook xretbadboy 2005+ 32 December 15th, 2006 10:49 AM
ipod hook up gooberhead320 V6 Mustangs 1 August 23rd, 2006 11:26 PM
can you guys hook me up? 04COBRA Multimedia 21 December 4th, 2005 06:17 AM


All times are GMT -4. The time now is 06:45 PM.
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company.
Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.