hey need help with hard wire install (Hot in Run)

94stang · May 4th, 2008, 01:58 PM

Hey guys!
Plain and "simple" I need a good wire i can use for all my gadgets im running,

i need one for when the car is starting and running (hot in run) and if i can i want one that doesnt lose power when im starting it. so my radar makes one annoying startup noise instead of 2.

here is a list of what i am going to run off of this circuit.

3 gauges (i think 1 amp each)
1 wideband brain box (about 5 amps)
1 radar detector (5 amps)

also i want it to run it all on one fuse in the fuse block, and if i could/should i would take the extra time to add a new fuse in the fuse block just as long as the run in hot wire is right there and i dont have to run a HOT wire down to it.
Thanks for any help and if there is a easer way that will be clean and easy to change a fuse i am open to ideas!

94stang · May 4th, 2008, 03:19 PM

bump!! come on i know you know!

Bullitt2445 · May 4th, 2008, 04:54 PM

Look for a Tan/White in the ignition harness (should be around 10 guage). That is the main ignition wire. Make sure to fuse it where you make your connection.

94stang · May 5th, 2008, 02:50 AM

Thanks!

Is there any dead-end wires that will be hot in run that are in or near the fuse block under the dash?

94stang · May 6th, 2008, 02:38 AM

bump... or does anyone have a wireing diagram or somewhere i can find one thats in color?

Bullitt2445 · May 7th, 2008, 07:40 AM

No extra wiring under the dash. But there may be some unused spots in the fuse box, but you would need to pull it down and look at the back side to know.

94stang · May 9th, 2008, 11:34 AM

ok will do thanks!

May 4th, 2008, 01:58 PM	#1
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 361	hey need help with hard wire install (Hot in Run) Hey guys! Plain and "simple" I need a good wire i can use for all my gadgets im running, i need one for when the car is starting and running (hot in run) and if i can i want one that doesnt lose power when im starting it. so my radar makes one annoying startup noise instead of 2. here is a list of what i am going to run off of this circuit. 3 gauges (i think 1 amp each) 1 wideband brain box (about 5 amps) 1 radar detector (5 amps) also i want it to run it all on one fuse in the fuse block, and if i could/should i would take the extra time to add a new fuse in the fuse block just as long as the run in hot wire is right there and i dont have to run a HOT wire down to it. Thanks for any help and if there is a easer way that will be clean and easy to change a fuse i am open to ideas! __________________ 2002 mustang gt 5speed, procharged...Fun PRO-M Blowthru Maf for 42lb with iat sensor! must go trade for LMAF!! 1999-2004 supercharger kit for sale. plus extras! check out my garage for details

May 4th, 2008, 03:19 PM	#2
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 361	bump!! come on i know you know! __________________ 2002 mustang gt 5speed, procharged...Fun PRO-M Blowthru Maf for 42lb with iat sensor! must go trade for LMAF!! 1999-2004 supercharger kit for sale. plus extras! check out my garage for details

May 4th, 2008, 04:54 PM	#3
Bullitt2445 Regular 2001 Bullitt #02445 Join Date: Feb 2008 Location: Arkansas Posts: 164	Look for a Tan/White in the ignition harness (should be around 10 guage). That is the main ignition wire. Make sure to fuse it where you make your connection. __________________ 2001 Bullit #02445 built in the only color Henry would build- Black.

May 5th, 2008, 02:50 AM	#4
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 361	Thanks! Is there any dead-end wires that will be hot in run that are in or near the fuse block under the dash? __________________ 2002 mustang gt 5speed, procharged...Fun PRO-M Blowthru Maf for 42lb with iat sensor! must go trade for LMAF!! 1999-2004 supercharger kit for sale. plus extras! check out my garage for details

May 6th, 2008, 02:38 AM	#5
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 361	bump... or does anyone have a wireing diagram or somewhere i can find one thats in color? __________________ 2002 mustang gt 5speed, procharged...Fun PRO-M Blowthru Maf for 42lb with iat sensor! must go trade for LMAF!! 1999-2004 supercharger kit for sale. plus extras! check out my garage for details

May 7th, 2008, 07:40 AM	#6
Bullitt2445 Regular 2001 Bullitt #02445 Join Date: Feb 2008 Location: Arkansas Posts: 164	No extra wiring under the dash. But there may be some unused spots in the fuse box, but you would need to pull it down and look at the back side to know. __________________ 2001 Bullit #02445 built in the only color Henry would build- Black.

May 9th, 2008, 11:34 AM	#7
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 361	ok will do thanks! __________________ 2002 mustang gt 5speed, procharged...Fun PRO-M Blowthru Maf for 42lb with iat sensor! must go trade for LMAF!! 1999-2004 supercharger kit for sale. plus extras! check out my garage for details

Threads Similar to: hey need help with hard wire install (Hot in Run)
Thread	Thread Starter	Forum	Replies	Last Post
410 install,how hard?	nuffboost	99-04	14	March 7th, 2008 02:00 AM
How hard of an install??	AnglicoGT98	99-04	14	January 24th, 2008 10:37 PM
Key-On Hot wire	dStoltenberg	5.0 Mustangs	4	October 10th, 2007 12:35 AM
Is a CAI hard to install?	Compy386	V6 Mustangs	19	January 30th, 2007 04:20 AM
amp wire run	94mustanggt	Electronics	12	August 17th, 2006 05:56 PM

All times are GMT -4. The time now is 02:27 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.