[Juggalo_X]

Ok so this is going ot be a story and a half, here it goes.

about 2 weeks back my window on the drivers side started to bind. i disassembled the door and fixed it. but 2 days later it got jammed half way up and i heard a loud pop noise. the window fell into the door and me being pissed off at 2 am forced it back up locked my car and left.

when i got to my car in the morning i realized that the door lock didnt work (electrical) using the switch or the keyless so i ignored it. well later that day i slammed my door and the fuckin window fell in again but this time when i tried to put it back up my door open chime started to go off when the door was closed. then the door lock started workin to lock the door but not unlock it (switch or keyless) and my door open switch started to malfunction because the keyless wouldn't arm the alarm (2 beeps instead of one) and the interior light stayed on.

so i ripped the fuckin door apart again. and noticed the window bracket has COMPLETELY fallen apart and managed to grab the wires and mangle them. I cut the chunk of mangled wire out and re soldered in new 6" legnths of wire that go to the door open switch, and the door lock actuator.

now the window is dinked i need a whole new assemble i have it rigged to stay up with a pace of wood tho. the issue is now that the auto door lock does not work at all. to lock or unlock. i can hear the relay clicking for the drivers side but the lock actuator does not move. i cannot find any other wiring issues. is there something i am missing or is the actuator smoked?

PS> i cannot find my test light my lil brother has seemed to have stolen it.