![]() | ![]() | |||||||||||
| ||||||||||||
|
|||||||
Discussing still need help with cd player in the Electronics Forum. for those of u who dont know i recently installed an aftermarket cd player and ... Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free! |
|
|
LinkBack | Thread Tools |
|
|
#1 |
|
Regular
Join Date: May 2007
Posts: 133
|
still need help with cd player |
|
|
#2 |
|
Regular
Join Date: May 2007
Posts: 133
|
and also if i unplug that little harness the noise goes away so it has to be something to do with that.
|
|
|
#3 |
|
Regular
2003 Mustang GT
Join Date: May 2008
Location: Lawrenceville, GA
Posts: 65
|
What kinda of radio? Mach 460? Pioneer Deck? Are you using the Rca output on the Deck? I seen this with pioneer decks with getting feed back when I intergat with factory amps of getting feed back. You may just want to bypass the factory amps if you are have this problem. If you bypass then i remmoend you replacing the speackers too.
|
|
|
#4 |
|
Regular
Join Date: May 2007
Posts: 133
|
yeah its a mach 460 but a sony deck. im not using the factory amps now and its not making the noise but it sounds a lot quieter without the amps
|
|
|
#5 |
|
Regular
2003 Mustang GT
Join Date: May 2008
Location: Lawrenceville, GA
Posts: 65
|
o2 gt? im puzzled with out the amps your still getting the noise. Is the sony deck branded new? There may be something wrong with the build in amp on the sony deck. If the deck is new take it out and exchange. Try a new one. If you can not exchange it take to a location car audio shop and have them bench test the radio. There they should hook up power and a speaker to the deck to see if they get the same problem.
|
|
|
#6 |
|
Regular
Join Date: May 2007
Posts: 133
|
no it doesnt do it when the amps arent hooked up. only when they are. i think for some reason i cant ground the amps well enough. if that makes sense.
|
|
|
#7 | |
|
Regular
Join Date: Oct 2006
Posts: 277
|
did u run the rcas for your amp on the same side of the cars as ur power wire?
__________________
|
|
|
|
#8 |
|
Regular
Join Date: May 2007
Posts: 133
|
i didnt run rcas. i just hooked up the harness they gave me. i dont know where the power wire would be. theyre factory amps not aftermarket.
|
|
|
#9 |
|
Regular
2001 Cobra Vert.
Join Date: Jun 2007
Location: Mechanicsburg, Pennsylvania
Posts: 427
|
could it be engine interference? i kept getting engine interference in my back two speakers with the mach audio system when I installed a new amp. I got a ground-loop isolater, pulled the head unit out and installed that inbetween the rca to the head unit and amp. then i tucked it all back into the console there etc and no more noise through speakers. but i don't know if your problem is engine interference or not. but just thought i could throw this out there. if it is let me know...i got the engine interference noise problem down pat.
|
![]() |
| Thread Tools | |
|
|
Threads Similar to: still need help with cd player
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| cd player is in... but | 02MiNeRaLgRaYGT | 99-04 | 11 | May 31st, 2008 11:14 AM |
| CD player help | Monster90 | Electronics | 9 | February 10th, 2008 02:15 PM |
| 05+ CD Player In A 01-04 | B0B | 99-04 | 6 | January 7th, 2008 11:24 PM |
| cd player | Ryno | 99-04 | 20 | March 22nd, 2007 08:17 PM |
| After Market CD Player Help | mikethetigerrr | Electronics | 3 | October 28th, 2006 04:29 PM |