1pc Projector Head Lights installation

November 11th, 2006, 04:46 PM	#1
boyb1917 Newbie Join Date: Nov 2006 Posts: 2	1pc Projector Head Lights installation Hi guys, Does any one know how to install 1pc projector head lights for mustang 94-98? I installed it already however there are 2 open wires(2 red and 2 blacks each sides) that come with these haed lights. I don't know what to do with these wires. What are these wires for? Thanks guys. ILoveMustang.

November 11th, 2006, 10:24 PM	#2
jerb43 Regular Join Date: Sep 2006 Posts: 185	does your new headlights have halos? __________________ 1998 Mustang GT Super Charged! CGS Sub frames, Auto Meter gauges, Bassani Exhaust!

November 11th, 2006, 11:38 PM	#3
boyb1917 Newbie Join Date: Nov 2006 Posts: 2	yes it does.

November 12th, 2006, 04:53 PM	#4
jerb43 Regular Join Date: Sep 2006 Posts: 185	well, the other wires, MIGHT be for the halos, i should be getting mine in soon, so maybe i can help when i put mine on! __________________ 1998 Mustang GT Super Charged! CGS Sub frames, Auto Meter gauges, Bassani Exhaust!

November 12th, 2006, 10:21 PM	#5
SoonerBorn Newbie Join Date: Oct 2006 Posts: 42	I'm thinkin about getting some halo's for mine, where did you buy them from?

November 13th, 2006, 12:30 AM	#6
jerb43 Regular Join Date: Sep 2006 Posts: 185	yeah boyb1917 where did you buy your lights from? __________________ 1998 Mustang GT Super Charged! CGS Sub frames, Auto Meter gauges, Bassani Exhaust!

November 13th, 2006, 01:16 AM	#7
97TunedMustang Enthusiast Join Date: Jan 2006 Posts: 963	one is probably for the halo ring/s. and the other set of wires for the 3 or so led's that it probably also has. you can wire em into the +12v thats on when your parking lamps are on. just tie it into the one on the back of the turn signal harness. also some people suggested possibly adding a switch to the halos/leds cause they get dim after awhile if left on all the time. dont know if thats the case. just what ive heard. __________________ New block with forged internals running 16psi, tuned by Lasota Racing Too many mods to list... 3.73's and Truetrac Finally Done! Water-methanol injection? Dyno Tune fo sho, Street tune FTL!

November 13th, 2006, 10:08 AM	#8
FaStStAnG5-0 Hardcore Enthusiast Join Date: Jul 2006 Location: Mooresville, NC Posts: 1,213	yeah, i know for a fact that those are the halo's & the LED's on the lights.. i hooked all of them to a switch so that way i can flip em on & off whenever i so feel like it.. i also heard that they will burn out quick if hooked directly to the headlights so that was another reason i hooked em to a switch.. __________________ http://www.cardomain.com/ride/2461223 1994 GT: MSD 6AL, BBK O/R H-Pipe, Dynomax Race Bullet mufflers, 3:73 rear, Hurst Short Shifter, MAC cold air intake & much more coming soon!

November 22nd, 2006, 12:37 AM	#9
kerry Regular Join Date: Aug 2006 Posts: 485	i have had mine for over a year and they are just as bright. i have them hooked up with the running lights. i have the older version of the lights with only 1 halo ring and a small light on the inside instead of led's

November 22nd, 2006, 03:45 PM

#10

CyberPrey

Regular

Join Date: Oct 2006

Posts: 333

Originally Posted by kerry

i have had mine for over a year and they are just as bright. i have them hooked up with the running lights.
i have the older version of the lights with only 1 halo ring and a small light on the inside instead of led's

Yep, thats how mine were to.

the set of wires underneath the "projector" or outside bulb are for the halo... the wires near the inboard side (closest to the grill) are the lights for the inner light or LED's..... Wire them into the running lights is easiest

December 15th, 2006, 10:45 PM	#11
spicetraders Newbie Join Date: Nov 2006 Location: Yuma AZ Posts: 13	I just got my halo-projectors today. JDM with DOT approved amber sides $78 for set. I have taken out the old lights but found the projector needs some trimming on the cars plactic back to fit. (tomorrows work) My four extra wires are for one set halo, one set for the little spot bulb, never was sure on what it does but will hook it to running lights. As for the halos I want to leave then on at night so am looking for a night sensor that will let them come on automatically when dark. They are low current draw so should not affect a good working battery. My surprise was I thought the projectors were the high beams. Also had a set of amber 1157s but they are not the proper type for side turn/running so had to buy a new set. Biggest issue after installing these is how to change bulbs with out having to remove whole unit. __________________ Fast or slow I like to make them go, Big or small I will drive them all.

December 16th, 2006, 02:20 AM

#12

loudenough

Regular

Join Date: Jul 2006

Location: Ontario

Posts: 194

Originally Posted by kerry

i have had mine for over a year and they are just as bright. i have them hooked up with the running lights.
i have the older version of the lights with only 1 halo ring and a small light on the inside instead of led's

nice but thats not to bright in my eyes do they use the 9007`s or what ever it is?

Threads Similar to: 1pc Projector Head Lights installation
Thread	Thread Starter	Forum	Replies	Last Post
PROJECTOR HEAD LIGHTS INSTALL!!!	04gt	99-04	7	October 10th, 2007 11:14 PM
Angel eye/projector lights	SilverStang06	Visual	1	March 4th, 2007 11:13 PM
hid projector lights	droppedbass87	Visual	13	January 3rd, 2007 06:19 AM
Projector head lights	scubasteve041186	V6 Mustangs	12	December 27th, 2006 12:36 AM
1pc Projector Head Lights!	jerb43	Electronics	13	November 7th, 2006 12:29 PM

All times are GMT -4. The time now is 03:44 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.