Alot of Mustang parts for sale, cheap!!!

mach1racer · January 7th, 2009, 02:25 AM

OK, here gose.......
Were moving back to California this comming April and we are selling out "stash" of Mustang parts.
My husband wrote this and stuck it on craigslist, so im just going to copy and paste!!!!

*CAUTION* There is alot to read!!!!

-V6 stuff-

*1994 - 1995 Mustang 3.8L V6 shortblock - blew head gasket, sat for 4 years. Needs to be rebuilt, no clue if there is rust inside or not.
*1994 - 1998 T5 5spd transmission 3.8L V6. Less than 2000 miles, bought from Ford to put into my 95' only to have the engine blow a head gasket. Great new transmission. They told me it was a World Class GT (5.0) transmission, never saw it though, you are more than welcome to inspect it. Should be on the Carfax
*1994 - 1998 Mustang 3.8L V6 Throttle Body
*1999 - 2004 Mustang 3.8L V6 Throttle Body
*1994 - 2000 Mustang 3.8L V6 Ignition pack w/ bracket (3x)
*1994 - 1998 Mustang 3.8L V6 Water Pump pulley (From a 96')
*1994 - 1998 Mustang 3.8L V6 Crank Pulley (From a 96')
*1994 - 1998 Mustang 3.8L V6 Crank Dampener (From a 96')
*1994 - 2004 Mustang 3.8L V6 plastic lifter retainers (2 pair)
*1994 - 1998 Mustang 3.8L V6 heads (From 95' w/blown gaskets not sure if good)
*1994 - 1998 Mustang 3.8L V6 3-wire DIS sensor and shaft (Distributor basicly)
*1999 - 2000 Mustang 3.8L V6 2-wire DIS sensor and shaft (Distributor basicly)
*1994 - 2004 Mustang 3.8L V6 Valve covers, black, 2 pair.
*1994 - 1998 Mustang Upper Intake w/ TB and sensors.
*1994 - 1998 Mustang Lower Intake w/ fuel rail and injectors and sensors.
*1999 - 2004 Windstar V6 plastic Upper intake (Great upgrade for your mustang)
*1999 - 2004 F-150 4.2L Upper Intake (from a 97' F-150, great for performance.)
*2001 - 2004 Mustang 3.8L / F-150 4.2L IMRC Lower intake manifold.
*2001 - 2004 and 1997 - 1999 F-150 4.2L IMRC controllers (From a 97' F150.)
*1994 - 1998 Accessory brackets (Two, from a 96')
*1994 - 1998 Mustang 3.8L V6 Oil Pan (From a 96' and may fit 99-04)
*1994 - 1998 Mustang 3.8L V6 timing chain cover (Came off a 96')
*1999 - 2004 Mustang 3.8L V6 Exhaust manifolds (From a 2000, no cracks)
*1994 - 1998 Mustang 3.8L V6 (1) muffler & flowtube w/flange cut after muffler.
*1994 - 1995 Mustang 3.8L V6 MAF
*1996 - 2000 Mustang 3.8L V6 MAF (May work for 01-04.)
*1994 - 1998 Mustang 3.8L V6 Stock intake tubing and filter housing (2x)
*1999 - 2000 Mustang 3.8L V6 Flexplate (Automatic)
*1994 - 1998 Mustang 3.8L V6 Electric Fan and shroud - NEW NEW NEW fan motor from my 95'- Good for a street rod project.
*1999 - 2004 EV6 Thin or pencil fuel injector harness and connectors.
*1994 - 2004 Mustang 3.8L V6 misc engine harness, sensors, hoses and wires.

-Classic Mustang-

*1968 - 1970 Mustang 1bbl Carb Autolite 1100 *NEW* Paid $350 -Offers-
*1964 - 1973 Mustang 1bbl to 2bbl Clifford Adapter -Collectors item-
*1969 - 1973 Mustang, Fastback, Mach 1 twist on Fuel Cap + wire (From a 70')
NEW IN BOX Mustang 351C 4V Intake and Exhaust Valves Swirl Polished - Stock

-GT and Cobra-

*1994 - 1998 Mustang GT 8.8" Rearend 2.73 posi complete minus sway bar & brakes
*1994 - 1998 Mustang GT 150mph Guage cluser 110,377 miles (From 95' GT)
*1994 - 1998 Mustang GT Glove Box - Grey -
*1994 - 2004 Mustang GT Cobra NEW IN BOX Heater Core
*1994 - 1998 Mustang GT EV1 19lb Fuel injectors
*1996 - 2004 Mustang GT 4.6L O/R X-pipe (I think its a Mac, no markings)
*2005 - 2009 Steeda Pro Flow plastic high flow CAI upgrade Sells for $110 as an upgrade to Steeda's CAI/Tuner kit. Works for other CAI/Tuner combo's too. -Offer-
*1994 - 1998 Mustang Cobra Mach460 Sound system without the head unit, or the two 6x9 speakers in the box or the body wiring, everything else is there.
*1996 - 1998 Cobra Roller rockers, 32 stock needle bearing. Two have light groove.
*1996 - 1998 Cobra signed Vavle covers (From a 97')
*1996 - 1998 Cobra aluminum IMRC plates (From a 97'. 98 is plastic but works.)
*1996 - 1998 Cobra IMRC controllers (From a 97')
*1996 - 1998 Cobra Chain tensioners (2x from a 97')
*1996 - 1998 Cobra Chain runner guides
*1996 - 1998 Cobra Chains 2x long 2x short
*1996 - 1998 Cobra sprockets (Heads and trigger wheel)
*1996 - 1998 Cobra EV1 Fuel injectors 8x (24lb)
*1996 - 1998 Cobra Fuel Rail
*1996 - 1998 Cobra Stock air intake, 80mm MAF and filter housing
*1996 - 1998 Cobra Mirror Polished Intake Manifold and Throttle Body
*1996 - 1998 Cobra Timing Chain cover painted Glossy Silver
*1996 - 1998 Cobra assorted engine sensors
*1999 - 2004 Lightning MAF aka LMAF 90mm
*2003 - 2004 Mach 1 4.6L Coil Packs (8x)
*2003 - 2004 Mach 1 4.6L engine harness
*2003 - 2004 Mach 1 Power steering plastic container

Last but not least is my 2003 Mach 1 engine.

2003 / 2004 Mach 1 Engine
4.6L 305hp
6 bolt crank.

*NOTE: I have more pictures upond request.

-------------------------------------------------------------------------------
For $3500 you can have my 1995 Mustang with it too, thats only $500 for my car. I bought this engine to go in my Mustang but the project went on the back burner after my daughter was born. It would also come with the K-member, front IFS, spindles, ABS triggers, Power Rack.
-------------------------------------------------------------------------------

I am selling the engine complete plus engine wiring harness.
THERE IS NO SHAKER OR SHAKER HOOD!!!
The heads, intake, accessories, dampener and flexplate were taken off the engine, I was going to send the heads off to Livernois for CNC porting but went with a different setup.

I have never removed the oil pan, oil pump/cover or water pump. It is as assembled by Ford. I also have never taken apart the heads, they too are as by Ford.

Really you should think of this as doing a head gasket swap because the same gaskets are needed.

I priced the complete gasket set needed (Including stock head gaskets) from Friendly Ford of Springfield Missouri for $350 dollars.

I have had this engine since the begining of 2004. It came from a Ford Test Mach 1 and was purchased through GreenLeaf.

The car was never registered or owned and Greenleaf assured me of less than 500 hours on the engine as it was just for test. The VIN stamped on the front will lead to a vehicle that doesnt exist, I can send it at your request.

Items Included in the sale.

*Complete never tampered with Shortblock
*Complete never tampered with heads
*Intake w/fuel rail (No fuel injectors)
*6 bolt flexplate
*Stock Dampener
*Timing chain cover
*Timing chains
*Accessories (NO A/C unit)
*Power steering plastic tank and PS unit

I am asking $3000 obo for The entire engine.
I will not ship this item but I can bring up to 500miles one way if you pay for my gas.

I prefer this so that you can look at it yourself, have your mechanic look at it and be 100% assured that it is as close to getting a new one from Ford, which costs over $6000 btw.

$3000obo for the engine
$3500 for the engine and car combo/project.

Contact me through my e-mail at CrainRacing@yahoo.com or leave a message on my phone 417-569-9028 Ask for Eric.

Thanks.

G.T. Rags · January 7th, 2009, 02:27 AM

how much for the offroad pipe shipped to 11725?

for the 96-04 gt of course

njstang · January 8th, 2009, 12:51 AM

Originally Posted by 96GTRagTop

how much for the offroad pipe shipped to 11725?

for the 96-04 gt of course

damn beat me to it. if the deal falls through please pm me next thanks

sgtcervantez · January 12th, 2009, 06:26 PM

Will you sell heads sperately?

mach1racer · January 12th, 2009, 07:20 PM

Some pics of stuff I have for sale
the valve Covers are polished and so is the Timing chain cover
$65 for the chain cover and $150 for the valve covers

~~~
also some pics of the Mach 1 engine..............

Flickr: mach1racer's Photostream

pay no attention to the cobra engine and trans pics......it's all gone I just havent taken it off flickr yet.

sick_46 · January 14th, 2009, 11:23 PM

is the heater core a factory ford unit? how much?

KCstang · January 15th, 2009, 12:16 PM

Is the windstar upper the complete kit? If so how much shipped to zip 64155?

01GT4.6 · January 15th, 2009, 11:37 PM

willing to sell the mach 1 dampener alone??

Dirtyblackhoe · January 16th, 2009, 10:54 AM

how much for the 95GT instrument cluster?

chickenbot · January 16th, 2009, 10:57 AM

are these just spare parts or off a parts car you have lyin around? if so willin to sell front spindles, rotors, calipers, and lines? how much for the t-5? what part of cali? i just made the jurney to tx from there right b4 christmas

sick_46 · January 16th, 2009, 11:10 AM

Im cold I need a oem heater core.

chickenbot · January 16th, 2009, 11:20 AM

Originally Posted by sick_46

Im cold I need a oem heater core.

ill give you mine.. i dont know if it works.. been bypassed ever sence i bought it and its a fox lol

95SC · January 16th, 2009, 05:03 PM

Originally Posted by mach1racer

*1996 - 1998 Cobra Mirror Polished Intake Manifold and Throttle Body

I'm interested in these parts, how much ?

mach1racer · January 18th, 2009, 04:20 AM

Most PM's replied.

I wont sell just the dampener alone, its part of the engine package.

Shipping quotes have to wait till Monday.

The Polished Cobra valve covers and Timing chain cover are on ebay and have already hit the reserve prices I asked here. If anyone else is interested better bid quick, they are almost done! My ebay name is 71Mach1Racer

If the engine doesnt sell its just going into my Mach 1. Its under 1000 miles VERIFIED WITH PAPERWORK and no one believes it, oh well I wanted it for my car anyways >:}

whitemustang02 · January 24th, 2009, 11:27 AM

how much would you like for the
1999 - 2004 Windstar V6 plastic Upper intake

mach1racer · February 5th, 2009, 06:46 AM

*BUMP*
I need this stuff gone!!!
Make some offers people!!!!

FreStylMotoX01 · February 5th, 2009, 09:57 PM

im interested in the off road pipe if you still have it email me the price to FreStylMotoX01 @ A O L . C O M

Thanks.

89mcoupe · February 6th, 2009, 12:50 PM

i really need the imrc setup i have cash in hand call me 9037141440

mach1racer · February 13th, 2009, 06:05 AM

pictures of some of this stuff at
Flickr: mach1racer's Photostream

You can see the cobra polished intake

I'll try to get
Im moving to back to Cali in a month and a half and need this stuff gone.

MAKE OFFERS!!!!!!!!!!!

mach1racer · February 27th, 2009, 06:12 PM

*BUMP*

NO REASONABLE OFFER REFUSED!!!!!!!!!!!!!

I can get pics to anyone that wants them.

January 7th, 2009, 02:25 AM	#1
mach1racer Regular iTrader: 0 / 0% 1971 Mustang Mach 1 Join Date: Apr 2007 Location: Springfield, MO.. but going back to Cali :) Posts: 70	Alot of Mustang parts for sale, cheap!!! OK, here gose....... Were moving back to California this comming April and we are selling out "stash" of Mustang parts. My husband wrote this and stuck it on craigslist, so im just going to copy and paste!!!! CAUTION There is alot to read!!!! -V6 stuff- 1994 - 1995 Mustang 3.8L V6 shortblock - blew head gasket, sat for 4 years. Needs to be rebuilt, no clue if there is rust inside or not. 1994 - 1998 T5 5spd transmission 3.8L V6. Less than 2000 miles, bought from Ford to put into my 95' only to have the engine blow a head gasket. Great new transmission. They told me it was a World Class GT (5.0) transmission, never saw it though, you are more than welcome to inspect it. Should be on the Carfax 1994 - 1998 Mustang 3.8L V6 Throttle Body 1999 - 2004 Mustang 3.8L V6 Throttle Body 1994 - 2000 Mustang 3.8L V6 Ignition pack w/ bracket (3x) 1994 - 1998 Mustang 3.8L V6 Water Pump pulley (From a 96') 1994 - 1998 Mustang 3.8L V6 Crank Pulley (From a 96') 1994 - 1998 Mustang 3.8L V6 Crank Dampener (From a 96') 1994 - 2004 Mustang 3.8L V6 plastic lifter retainers (2 pair) 1994 - 1998 Mustang 3.8L V6 heads (From 95' w/blown gaskets not sure if good) 1994 - 1998 Mustang 3.8L V6 3-wire DIS sensor and shaft (Distributor basicly) 1999 - 2000 Mustang 3.8L V6 2-wire DIS sensor and shaft (Distributor basicly) 1994 - 2004 Mustang 3.8L V6 Valve covers, black, 2 pair. 1994 - 1998 Mustang Upper Intake w/ TB and sensors. 1994 - 1998 Mustang Lower Intake w/ fuel rail and injectors and sensors. 1999 - 2004 Windstar V6 plastic Upper intake (Great upgrade for your mustang) 1999 - 2004 F-150 4.2L Upper Intake (from a 97' F-150, great for performance.) 2001 - 2004 Mustang 3.8L / F-150 4.2L IMRC Lower intake manifold. 2001 - 2004 and 1997 - 1999 F-150 4.2L IMRC controllers (From a 97' F150.) 1994 - 1998 Accessory brackets (Two, from a 96') 1994 - 1998 Mustang 3.8L V6 Oil Pan (From a 96' and may fit 99-04) 1994 - 1998 Mustang 3.8L V6 timing chain cover (Came off a 96') 1999 - 2004 Mustang 3.8L V6 Exhaust manifolds (From a 2000, no cracks) 1994 - 1998 Mustang 3.8L V6 (1) muffler & flowtube w/flange cut after muffler. 1994 - 1995 Mustang 3.8L V6 MAF 1996 - 2000 Mustang 3.8L V6 MAF (May work for 01-04.) 1994 - 1998 Mustang 3.8L V6 Stock intake tubing and filter housing (2x) 1999 - 2000 Mustang 3.8L V6 Flexplate (Automatic) 1994 - 1998 Mustang 3.8L V6 Electric Fan and shroud - NEW NEW NEW fan motor from my 95'- Good for a street rod project. 1999 - 2004 EV6 Thin or pencil fuel injector harness and connectors. 1994 - 2004 Mustang 3.8L V6 misc engine harness, sensors, hoses and wires. -Classic Mustang- 1968 - 1970 Mustang 1bbl Carb Autolite 1100 NEW Paid $350 -Offers- 1964 - 1973 Mustang 1bbl to 2bbl Clifford Adapter -Collectors item- 1969 - 1973 Mustang, Fastback, Mach 1 twist on Fuel Cap + wire (From a 70') NEW IN BOX Mustang 351C 4V Intake and Exhaust Valves Swirl Polished - Stock -GT and Cobra- 1994 - 1998 Mustang GT 8.8" Rearend 2.73 posi complete minus sway bar & brakes 1994 - 1998 Mustang GT 150mph Guage cluser 110,377 miles (From 95' GT) 1994 - 1998 Mustang GT Glove Box - Grey - 1994 - 2004 Mustang GT Cobra NEW IN BOX Heater Core 1994 - 1998 Mustang GT EV1 19lb Fuel injectors 1996 - 2004 Mustang GT 4.6L O/R X-pipe (I think its a Mac, no markings) 2005 - 2009 Steeda Pro Flow plastic high flow CAI upgrade Sells for $110 as an upgrade to Steeda's CAI/Tuner kit. Works for other CAI/Tuner combo's too. -Offer- 1994 - 1998 Mustang Cobra Mach460 Sound system without the head unit, or the two 6x9 speakers in the box or the body wiring, everything else is there. 1996 - 1998 Cobra Roller rockers, 32 stock needle bearing. Two have light groove. 1996 - 1998 Cobra signed Vavle covers (From a 97') 1996 - 1998 Cobra aluminum IMRC plates (From a 97'. 98 is plastic but works.) 1996 - 1998 Cobra IMRC controllers (From a 97') 1996 - 1998 Cobra Chain tensioners (2x from a 97') 1996 - 1998 Cobra Chain runner guides 1996 - 1998 Cobra Chains 2x long 2x short 1996 - 1998 Cobra sprockets (Heads and trigger wheel) 1996 - 1998 Cobra EV1 Fuel injectors 8x (24lb) 1996 - 1998 Cobra Fuel Rail 1996 - 1998 Cobra Stock air intake, 80mm MAF and filter housing 1996 - 1998 Cobra Mirror Polished Intake Manifold and Throttle Body 1996 - 1998 Cobra Timing Chain cover painted Glossy Silver 1996 - 1998 Cobra assorted engine sensors 1999 - 2004 Lightning MAF aka LMAF 90mm 2003 - 2004 Mach 1 4.6L Coil Packs (8x) 2003 - 2004 Mach 1 4.6L engine harness 2003 - 2004 Mach 1 Power steering plastic container Last but not least is my 2003 Mach 1 engine. 2003 / 2004 Mach 1 Engine 4.6L 305hp 6 bolt crank. NOTE: I have more pictures upond request. ------------------------------------------------------------------------------- For $3500 you can have my 1995 Mustang with it too, thats only $500 for my car. I bought this engine to go in my Mustang but the project went on the back burner after my daughter was born. It would also come with the K-member, front IFS, spindles, ABS triggers, Power Rack. ------------------------------------------------------------------------------- I am selling the engine complete plus engine wiring harness. THERE IS NO SHAKER OR SHAKER HOOD!!! The heads, intake, accessories, dampener and flexplate were taken off the engine, I was going to send the heads off to Livernois for CNC porting but went with a different setup. I have never removed the oil pan, oil pump/cover or water pump. It is as assembled by Ford. I also have never taken apart the heads, they too are as by Ford. Really you should think of this as doing a head gasket swap because the same gaskets are needed. I priced the complete gasket set needed (Including stock head gaskets) from Friendly Ford of Springfield Missouri for $350 dollars. I have had this engine since the begining of 2004. It came from a Ford Test Mach 1 and was purchased through GreenLeaf. The car was never registered or owned and Greenleaf assured me of less than 500 hours on the engine as it was just for test. The VIN stamped on the front will lead to a vehicle that doesnt exist, I can send it at your request. Items Included in the sale. Complete never tampered with Shortblock Complete never tampered with heads Intake w/fuel rail (No fuel injectors) 6 bolt flexplate Stock Dampener Timing chain cover Timing chains Accessories (NO A/C unit) Power steering plastic tank and PS unit I am asking $3000 obo for The entire engine. I will not ship this item but I can bring up to 500miles one way if you pay for my gas. I prefer this so that you can look at it yourself, have your mechanic look at it and be 100% assured that it is as close to getting a new one from Ford, which costs over $6000 btw. $3000obo for the engine $3500 for the engine and car combo/project. Contact me through my e-mail at CrainRacing@yahoo.com or leave a message on my phone 417-569-9028 Ask for Eric. Thanks. __________________ Don't Just Sit There....Watch For Cops!!!

January 12th, 2009, 07:20 PM	#5
mach1racer Regular iTrader: 0 / 0% 1971 Mustang Mach 1 Join Date: Apr 2007 Location: Springfield, MO.. but going back to Cali :) Posts: 70	Some pics of stuff I have for sale the valve Covers are polished and so is the Timing chain cover $65 for the chain cover and $150 for the valve covers ~~~ also some pics of the Mach 1 engine.............. Flickr: mach1racer's Photostream pay no attention to the cobra engine and trans pics......it's all gone I just havent taken it off flickr yet. __________________ Don't Just Sit There....Watch For Cops!!!

January 15th, 2009, 11:37 PM	#8
01GT4.6 Enthusiast iTrader: 1 / 100% 2001 Mustang GT 12.4@111 (N/A) Join Date: Jun 2008 Location: Louisiana Posts: 574	willing to sell the mach 1 dampener alone?? __________________ 12.4 @ 111mph N/A 2V... (first trip out) in desperate need of a driver mod N2O times coming soon my junk at the track

January 16th, 2009, 10:57 AM	#10
chickenbot Enthusiast iTrader: 0 / 0% 1990 mustang gt eventually Join Date: Nov 2007 Location: plano, tx Posts: 879	are these just spare parts or off a parts car you have lyin around? if so willin to sell front spindles, rotors, calipers, and lines? how much for the t-5? what part of cali? i just made the jurney to tx from there right b4 christmas __________________ 1990 gt 5.0 Mac Performance 76mm straight shot intake 70mm Accufab tb and egr spacer Trick Flow Track Heat u/l intake 3.55 gears MSD distributor, Blaster Coil, and 8.5mm wires Last edited by chickenbot : January 16th, 2009 at 10:59 AM.

January 16th, 2009, 11:10 AM	#11
sick_46 Newbie iTrader: 0 / 0% 1998 GT Join Date: Jan 2009 Location: Adel Ga Posts: 32	Im cold I need a oem heater core. __________________ 98GT (FOBRA), 03PI MOTOR, STEEDA CAI, 75MM T-BODY AND PLENUM, MOTORSPORT WIRES, OFF ROAD H, FLOWMASTER CATBACK, 4R70W AUTOMATIC W/ J-MOD, 2800 STALL, 4:10 GEARS. ZEX WET KIT 100HP SHOT 12.95@108

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

January 12th, 2009, 06:26 PM	#4
sgtcervantez Newbie iTrader: 0 / 0% Join Date: Jan 2009 Posts: 6	Will you sell heads sperately?

January 14th, 2009, 11:23 PM	#6
sick_46 Newbie iTrader: 0 / 0% 1998 GT Join Date: Jan 2009 Location: Adel Ga Posts: 32	is the heater core a factory ford unit? how much?

January 15th, 2009, 12:16 PM	#7
KCstang Newbie iTrader: 0 / 0% 2004 Mustang V6 Join Date: Jan 2009 Location: Kansas City, Missouri Posts: 5	Is the windstar upper the complete kit? If so how much shipped to zip 64155?

January 16th, 2009, 10:54 AM	#9
Dirtyblackhoe Newbie iTrader: 0 / 0% Join Date: Jan 2009 Posts: 3	how much for the 95GT instrument cluster?

January 18th, 2009, 04:20 AM	#14
mach1racer Regular iTrader: 0 / 0% 1971 Mustang Mach 1 Join Date: Apr 2007 Location: Springfield, MO.. but going back to Cali :) Posts: 70	Most PM's replied. I wont sell just the dampener alone, its part of the engine package. Shipping quotes have to wait till Monday. The Polished Cobra valve covers and Timing chain cover are on ebay and have already hit the reserve prices I asked here. If anyone else is interested better bid quick, they are almost done! My ebay name is 71Mach1Racer If the engine doesnt sell its just going into my Mach 1. Its under 1000 miles VERIFIED WITH PAPERWORK and no one believes it, oh well I wanted it for my car anyways >:} __________________ Don't Just Sit There....Watch For Cops!!!

January 24th, 2009, 11:27 AM	#15
whitemustang02 MM's official Chevy guy iTrader: 0 / 0% 2002 Mustang V6 Join Date: Sep 2007 Location: Rochester, NY Posts: 1,993	how much would you like for the 1999 - 2004 Windstar V6 plastic Upper intake __________________ "Speak softly and carry a big stick" - Theodore Roosevelt "Any idiot can make a V8 fast, it takes a real idiot to make a fast V6". '02 Mustang N/A 4.3 stroker away for winter '72 Chevelle project car 454 coming '93 Bronco EFI 351W DD

February 5th, 2009, 06:46 AM	#16
mach1racer Regular iTrader: 0 / 0% 1971 Mustang Mach 1 Join Date: Apr 2007 Location: Springfield, MO.. but going back to Cali :) Posts: 70	BUMP I need this stuff gone!!! Make some offers people!!!! __________________ Don't Just Sit There....Watch For Cops!!!

February 5th, 2009, 09:57 PM	#17
FreStylMotoX01 Newbie iTrader: 1 / 100% 03 GT Join Date: Feb 2009 Location: Charlestown NH Posts: 23	im interested in the off road pipe if you still have it email me the price to FreStylMotoX01 @ A O L . C O M Thanks.

February 6th, 2009, 12:50 PM	#18
89mcoupe Newbie iTrader: 0 / 0% Join Date: Jan 2008 Posts: 2	i really need the imrc setup i have cash in hand call me 9037141440

February 13th, 2009, 06:05 AM	#19
mach1racer Regular iTrader: 0 / 0% 1971 Mustang Mach 1 Join Date: Apr 2007 Location: Springfield, MO.. but going back to Cali :) Posts: 70	pictures of some of this stuff at Flickr: mach1racer's Photostream You can see the cobra polished intake I'll try to get Im moving to back to Cali in a month and a half and need this stuff gone. MAKE OFFERS!!!!!!!!!!! __________________ Don't Just Sit There....Watch For Cops!!!

February 27th, 2009, 06:12 PM	#20
mach1racer Regular iTrader: 0 / 0% 1971 Mustang Mach 1 Join Date: Apr 2007 Location: Springfield, MO.. but going back to Cali :) Posts: 70	BUMP NO REASONABLE OFFER REFUSED!!!!!!!!!!!!! I can get pics to anyone that wants them. __________________ Don't Just Sit There....Watch For Cops!!!

Threads Similar to: Alot of Mustang parts for sale, cheap!!!
Thread	Thread Starter	Forum	Replies	Last Post
Alot of 4.6 Parts.Cheap! Offers/Trades?	330CubeGt	Engine	1	October 29th, 2008 09:39 PM
Mustang Parts 4 Sale !!!!!!	sn94	Engine	2	July 3rd, 2008 05:53 AM
1997 Ford Mustang Gt (Black) For Sale Cheap!!!	97_stang_gt	Vehicles	8	March 8th, 2008 01:14 AM
Mustang Parts Cheap!	AnglicoGT98	Engine	23	February 28th, 2008 11:34 PM
Mustang Parts For Sale	bigbadwollfff04	For Sale	2	January 11th, 2008 08:38 AM

All times are GMT -4. The time now is 02:48 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.