PI short block and npi heads/cams for sale

Uncle Humjaba · May 7th, 2008, 07:51 PM

Hey,

So I have the following parts for sale... make offers on whatever. Will send pics on request. I'm located in the bay area California (pick up is nice).

NPI Heads / cams (105,000 miles)
2002 PI short block with misc other parts (70,000 miles)
- oem headers
- oem throttle body / upper plenum
- wiring harness
- coil-on-plugs
- valve covers
- front cover

Everything worked an ran great... Got the PI engine for cheap from someone who thought it had a spun rod bearing... turns out it was a busted chain guide and that was all. Now my 96 has a PI swap and I have this stuff lying around taking up space in my garage.

Uncle Humjaba · May 9th, 2008, 01:11 PM

Bumpity bump

SSG96GT · May 17th, 2008, 10:05 PM

So is the block good to go? I need something that will run good, already have a PI swap on my 96, but too many miles on my block and its burning oil.

Uncle Humjaba · May 18th, 2008, 02:04 AM

As far as I know yes. The symptoms he described to me when I bought the engine off him were those that would be displayed when a chain guide goes. The plastic was literally in two pieces, and the chain had been rubbing against the front cover and part of the chain tensioner. Rest of the engine looked fine though (I didn't take the oil pan off for lack of an engine stand...) and the heads/cams are workin' great on my car

Can you pick it up? Located in Tracy CA

SSG96GT · May 18th, 2008, 03:19 AM

Nope, no pick up. I am in South Korea. I will need something shipped to 73505. How much you want for it?

Uncle Humjaba · May 20th, 2008, 05:19 PM

PM sent... sorry about the delay

SayByeBye · May 21st, 2008, 07:46 PM

hey man if you could give pm me ur cell number so i can call you bout that 02 motor.... i tried to message you but my post count is low cus i havent been on this site too much and it wont let me message you. thanks bro. interested in the motor!

Uncle Humjaba · May 21st, 2008, 08:56 PM

Where do you live? Already kind of dealing with ssg96gt but if you can pick it up locally that'd be better...

Uncle Humjaba · August 5th, 2008, 05:56 PM

Bump... Still for sale x_X

May 7th, 2008, 07:51 PM	#1
Uncle Humjaba Enthusiast iTrader: 0 / 0% 1996 Mustang GT Premium 15.2@91 Join Date: Aug 2007 Location: Tracy, CA Posts: 527	PI short block and npi heads/cams for sale Hey, So I have the following parts for sale... make offers on whatever. Will send pics on request. I'm located in the bay area California (pick up is nice). NPI Heads / cams (105,000 miles) 2002 PI short block with misc other parts (70,000 miles) oem headers oem throttle body / upper plenum wiring harness coil-on-plugs valve covers front cover Everything worked an ran great... Got the PI engine for cheap from someone who thought it had a spun rod bearing... turns out it was a busted chain guide and that was all. Now my 96 has a PI swap and I have this stuff lying around taking up space in my garage. __________________ "He is no fool who gives up what he cannot keep to gain what he cannot lose."

May 9th, 2008, 01:11 PM	#2
Uncle Humjaba Enthusiast iTrader: 0 / 0% 1996 Mustang GT Premium 15.2@91 Join Date: Aug 2007 Location: Tracy, CA Posts: 527	Bumpity bump __________________ "He is no fool who gives up what he cannot keep to gain what he cannot lose."

May 18th, 2008, 02:04 AM	#4
Uncle Humjaba Enthusiast iTrader: 0 / 0% 1996 Mustang GT Premium 15.2@91 Join Date: Aug 2007 Location: Tracy, CA Posts: 527	As far as I know yes. The symptoms he described to me when I bought the engine off him were those that would be displayed when a chain guide goes. The plastic was literally in two pieces, and the chain had been rubbing against the front cover and part of the chain tensioner. Rest of the engine looked fine though (I didn't take the oil pan off for lack of an engine stand...) and the heads/cams are workin' great on my car Can you pick it up? Located in Tracy CA __________________ "He is no fool who gives up what he cannot keep to gain what he cannot lose."

May 18th, 2008, 03:19 AM	#5
SSG96GT Newbie iTrader: 0 / 0% 1996 GT Join Date: May 2008 Location: Currently Camp Casey, Korea Posts: 27	Nope, no pick up. I am in South Korea. I will need something shipped to 73505. How much you want for it? __________________ 1996 Mustang GT -Full PI Swap -Comp Cams -Steeda Tri-Axe -75mm TB and upper plentum -MAC CAI -MAC LT Headers -Shorty H-pipe with Flowmasters -Lowering springs -18x9 Gunmetal Saleen Wheels wrapped in 275x35x18

May 20th, 2008, 05:19 PM	#6
Uncle Humjaba Enthusiast iTrader: 0 / 0% 1996 Mustang GT Premium 15.2@91 Join Date: Aug 2007 Location: Tracy, CA Posts: 527	PM sent... sorry about the delay __________________ "He is no fool who gives up what he cannot keep to gain what he cannot lose."

May 17th, 2008, 10:05 PM	#3
SSG96GT Newbie iTrader: 0 / 0% 1996 GT Join Date: May 2008 Location: Currently Camp Casey, Korea Posts: 27	So is the block good to go? I need something that will run good, already have a PI swap on my 96, but too many miles on my block and its burning oil.

May 21st, 2008, 07:46 PM	#7
SayByeBye Newbie iTrader: 0 / 0% Join Date: Oct 2007 Posts: 3	hey man if you could give pm me ur cell number so i can call you bout that 02 motor.... i tried to message you but my post count is low cus i havent been on this site too much and it wont let me message you. thanks bro. interested in the motor!

May 21st, 2008, 08:56 PM	#8
Uncle Humjaba Enthusiast iTrader: 0 / 0% 1996 Mustang GT Premium 15.2@91 Join Date: Aug 2007 Location: Tracy, CA Posts: 527	Where do you live? Already kind of dealing with ssg96gt but if you can pick it up locally that'd be better... __________________ "He is no fool who gives up what he cannot keep to gain what he cannot lose."

August 5th, 2008, 05:56 PM	#9
Uncle Humjaba Enthusiast iTrader: 0 / 0% 1996 Mustang GT Premium 15.2@91 Join Date: Aug 2007 Location: Tracy, CA Posts: 527	Bump... Still for sale x_X __________________ "He is no fool who gives up what he cannot keep to gain what he cannot lose."

Threads Similar to: PI short block and npi heads/cams for sale
Thread	Thread Starter	Forum	Replies	Last Post
I Need a NPI or PI completer motor or block.	toscano17	Want to Buy	0	March 9th, 2008 03:22 PM
PI cams and Intake with NPI heads	KIKa55GT	96-98	28	January 19th, 2008 03:52 PM
short block differs from a long block how?	mustangfox9091	5.0 Mustangs	35	September 26th, 2007 10:57 PM
PI cams on NPI heads valve set up	ujslost	96-98	1	March 29th, 2007 01:41 AM
MMR Short Block vs DSS Short Block	superbeef1000	99-04	6	September 20th, 2006 04:49 AM

All times are GMT -4. The time now is 03:19 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.