4.6 forged rebuild set

97S281 · October 29th, 2008, 06:37 PM

This is a probe industries rebuild set.It is for a 2 valve motor. It has Forged 18.1cc dish pistons. Forged rods. clevite rod bearings, clevite main bearings and file fit rings. It cost me a grand but I am willing to let it go for $800.

97S281 · October 29th, 2008, 07:01 PM

The pistons are .030 bore

acmillr · November 1st, 2008, 11:58 AM

Your price is really good on this...

97S281 · November 2nd, 2008, 06:57 PM

Demello, why are you going to pm me to ask a question and then disable your ability to recieve a reply????

To answer your question:

The kit is complete. all you need is to have your block match bored to the pistons.

acmillr · November 2nd, 2008, 07:52 PM

Originally Posted by 97S281

Demello, why are you going to pm me to ask a question and then disable your ability to recieve a reply????

To answer your question:

The kit is complete. all you need is to have your block match bored to the pistons.

Demello is banned.

stangfreak · November 2nd, 2008, 07:56 PM

yea

rich1 · November 2nd, 2008, 08:45 PM

Can the kit be used on a 4v too.

97S281 · November 3rd, 2008, 03:58 PM

let me check and get back to you on that

acmillr · November 3rd, 2008, 03:59 PM

Yes it can. If you mind the info.

mustangmanic · November 5th, 2008, 03:35 PM

Hey man, i thin may be intrested. I'll let you know by this weekend!

97S281 · November 5th, 2008, 05:15 PM

Thanks, just let me know.

mtw002 · November 7th, 2008, 06:01 PM

man i could really use this Sh*T If you still have them mid Dec. I'll pick the stuff up.

Joebert · January 25th, 2009, 06:25 PM

still FS? im very interested

hbk_136 · January 25th, 2009, 11:15 PM

Originally Posted by rich1

Can the kit be used on a 4v too.

While you can use this on a 4v, the compression will be RIDICULOUSLY low, because the 4v engines have a lot less of a dish on their pistons because of the 4v head's combustion chambers...

97S281 · January 28th, 2009, 11:15 PM

Pm sent.

reckmann · January 29th, 2009, 02:17 PM

I might be interested trying to find the cash to rebuild my Tbird again. The bottom end went south the rest is NEW upgraded to 2002GT specs. Where are you located?
Regg

97S281 · February 2nd, 2009, 12:12 PM

Originally Posted by reckmann

I might be interested trying to find the cash to rebuild my Tbird again. The bottom end went south the rest is NEW upgraded to 2002GT specs. Where are you located?
Regg

Zebulon, NC. Like it says above the post count.

mattstang · February 22nd, 2009, 02:56 AM

bump

97S281 · April 30th, 2009, 07:00 PM

sold

2VTerror · October 21st, 2009, 10:45 PM

how much hp is this kit rated for

October 29th, 2008, 06:37 PM	#1
97S281 Hardcore Enthusiast iTrader: 2 / 100% 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 1,555	4.6 forged rebuild set This is a probe industries rebuild set.It is for a 2 valve motor. It has Forged 18.1cc dish pistons. Forged rods. clevite rod bearings, clevite main bearings and file fit rings. It cost me a grand but I am willing to let it go for $800. __________________

October 29th, 2008, 07:01 PM	#2
97S281 Hardcore Enthusiast iTrader: 2 / 100% 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 1,555	The pistons are .030 bore Attached Thumbnails __________________

November 1st, 2008, 11:58 AM	#3
acmillr MM's Mad Scientist iTrader: 2 / 100% Stockish GT 15.6@89MPH Join Date: Jul 2006 Location: Tampa, FL Posts: 4,911	Your price is really good on this... __________________

November 2nd, 2008, 06:57 PM	#4
97S281 Hardcore Enthusiast iTrader: 2 / 100% 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 1,555	Demello, why are you going to pm me to ask a question and then disable your ability to recieve a reply???? To answer your question: The kit is complete. all you need is to have your block match bored to the pistons. __________________

November 2nd, 2008, 08:45 PM	#7
rich1 Newbie iTrader: 0 / 0% Join Date: Aug 2008 Posts: 18	Parts Can the kit be used on a 4v too. __________________ AutoMachtic

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

November 2nd, 2008, 07:56 PM	#6
stangfreak Banned iTrader: 0 / 0% MEMBER #334 Join Date: Feb 2006 Location: Wyandotte County Posts: 1,635	yea

November 3rd, 2008, 03:58 PM	#8
97S281 Hardcore Enthusiast iTrader: 2 / 100% 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 1,555	let me check and get back to you on that __________________

November 3rd, 2008, 03:59 PM	#9
acmillr MM's Mad Scientist iTrader: 2 / 100% Stockish GT 15.6@89MPH Join Date: Jul 2006 Location: Tampa, FL Posts: 4,911	Yes it can. If you mind the info. __________________

November 5th, 2008, 03:35 PM	#10
mustangmanic MM Fanatic iTrader: 2 / 100% 2002 Mustang GT 13.334 @ 106.27 w/2.01 60' Join Date: May 2007 Location: Indianapolis Posts: 3,052	Hey man, i thin may be intrested. I'll let you know by this weekend! __________________

November 5th, 2008, 05:15 PM	#11
97S281 Hardcore Enthusiast iTrader: 2 / 100% 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 1,555	Thanks, just let me know. __________________

November 7th, 2008, 06:01 PM	#12
mtw002 Regular iTrader: 0 / 0% 2003 vert gt 13.3230 @ 103.54 Join Date: Oct 2006 Location: Colorado Springs CO Posts: 315	man i could really use this Sh*T If you still have them mid Dec. I'll pick the stuff up. __________________ Real Cars Dont Power The Front Wheels, They Lift Them!!!

January 25th, 2009, 06:25 PM	#13
Joebert Regular iTrader: 0 / 0% '99 Mustang GT N/A Join Date: Jan 2009 Location: Madison, IN. Posts: 115	still FS? im very interested __________________

January 28th, 2009, 11:15 PM	#15
97S281 Hardcore Enthusiast iTrader: 2 / 100% 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 1,555	Pm sent. __________________

January 29th, 2009, 02:17 PM	#16
reckmann Look Ma! My First Post! iTrader: 0 / 0% Join Date: Jan 2009 Posts: 1	I might be interested trying to find the cash to rebuild my Tbird again. The bottom end went south the rest is NEW upgraded to 2002GT specs. Where are you located? Regg

Threads Similar to: 4.6 forged rebuild set
Thread	Thread Starter	Forum	Replies	Last Post
Forged parts for any 4.6	Tez	Engine	3	June 7th, 2008 11:53 PM
Forged pistons???	SilverStang03	99-04	16	April 28th, 2008 02:31 PM
forged?	AnFking6908	V6 Mustangs	5	March 24th, 2008 12:30 AM
forged bottom	noob	99-04	2	April 1st, 2007 01:18 AM
Forged Internals	01silversnake	99-04	29	October 11th, 2006 08:25 AM

All times are GMT -4. The time now is 05:03 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2009, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

February 22nd, 2009, 02:56 AM	#18
mattstang Hardcore Enthusiast iTrader: 0 / 0% Join Date: May 2007 Posts: 1,593	bump

April 30th, 2009, 07:00 PM	#19
97S281 Hardcore Enthusiast iTrader: 2 / 100% 1997 Saleen S281 Join Date: Feb 2007 Location: ZEBULON N.C. Posts: 1,555	sold __________________

October 21st, 2009, 10:45 PM	#20
2VTerror Newbie iTrader: 0 / 0% Join Date: Oct 2009 Posts: 5	how much hp is this kit rated for

4.6 forged rebuild set

4.6 forged rebuild set

Parts