New cams and heads

GT/CS · August 15th, 2007, 04:30 AM

I have a 2007 Mustanng GT/CS 4.6L and I just got new racing heads with bigger lift cams. The heads are already come installed with the new valve train but not the cams of course. What sort of things can I expect to have to have to do with this kind of swap? Eg oil/lubrication or adjusting anything withing the heads/cams? I already have new gaskets and studs so thats a check. I am told that the stock followers and lash adjusters are to be reused from the stock heads...this means? What do they do? Thanks for any help guys!

ChrisJ · August 15th, 2007, 03:01 PM

You need to have the cams degreed...You should have a cam card that came with your cam...

This is not a great frist time do it yourselfer project...

You need a tune as well...

Depends on what the lift/duration of the cam is but you might need new valve springs...

GT/CS · August 15th, 2007, 11:25 PM

Oh i already have the whole aftermarket valve train installed in the heads and will have the car dynoed once it's done. As for the timing card I'll have to look. What exactly comes on the cam card? Just specs for the degrees? How do you adjust the cam degree?

August 15th, 2007, 04:30 AM	#1
GT/CS Regular Join Date: May 2007 Location: Wisconsin Posts: 122	New cams and heads I have a 2007 Mustanng GT/CS 4.6L and I just got new racing heads with bigger lift cams. The heads are already come installed with the new valve train but not the cams of course. What sort of things can I expect to have to have to do with this kind of swap? Eg oil/lubrication or adjusting anything withing the heads/cams? I already have new gaskets and studs so thats a check. I am told that the stock followers and lash adjusters are to be reused from the stock heads...this means? What do they do? Thanks for any help guys! __________________ Ford Racing heads, Comp stage III cams, 4.10's, Steeda delete plates, SLP long tube headers, Custom 3'' X pipe, Magna flow 3" Magnapacks, Airaid CAI, SCT XCAL 2 93 tune, Steeda front and rear swaybars, Dynotech aluminum driveshaft, HTP TB spacer

August 15th, 2007, 03:01 PM	#2
ChrisJ Hmmm... 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Shepherdsville, Kentucky Posts: 15,772	You need to have the cams degreed...You should have a cam card that came with your cam... This is not a great frist time do it yourselfer project... You need a tune as well... Depends on what the lift/duration of the cam is but you might need new valve springs... __________________ My Junk www.myspace.com/cjobe

August 15th, 2007, 11:25 PM	#3
GT/CS Regular Join Date: May 2007 Location: Wisconsin Posts: 122	Oh i already have the whole aftermarket valve train installed in the heads and will have the car dynoed once it's done. As for the timing card I'll have to look. What exactly comes on the cam card? Just specs for the degrees? How do you adjust the cam degree? __________________ Ford Racing heads, Comp stage III cams, 4.10's, Steeda delete plates, SLP long tube headers, Custom 3'' X pipe, Magna flow 3" Magnapacks, Airaid CAI, SCT XCAL 2 93 tune, Steeda front and rear swaybars, Dynotech aluminum driveshaft, HTP TB spacer

Threads Similar to: New cams and heads
Thread	Thread Starter	Forum	Replies	Last Post
Heads and cams	mystang0673	99-04	1	September 2nd, 2007 02:43 PM
Heads and cams	pa.ulB	Poweradders	4	August 9th, 2007 02:32 AM
CAMS vs Heads	nHuman	96-98	10	February 28th, 2007 08:43 AM
Heads and Cams help please!	00silvergt	99-04	4	June 10th, 2006 08:56 PM
heads and cams?	Drgnracin72	99-04	4	June 9th, 2006 12:04 PM

All times are GMT -4. The time now is 03:25 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.