What's your setup

Bill · April 15th, 2006, 12:13 AM

What exhaust setup do you have on your mustangs??? and what year??? and what are your thought's of it???

This will give member's a idea of what people are running and what they think of it.

right now i just got 40 series flows welded in on my 92 5.0 and it sounds pretty good.

Drgnracin72 · April 15th, 2006, 12:19 AM

I AM RUNNING BBK LONG TUBE HEADERS WITH NO CATS, X-PIPE WITH FLOMASTERS DUMPED UNDER THE REAR SEAT. IT SOUNDS VERY VERY BADASS

Bossman351 · April 15th, 2006, 01:04 AM

I have heddman hustler headers with a 3 inch collector going to 3 inch pipe straight back to Warlock chambered mufflers then into 2.5 inch pipe just to clear the rearend then once back over the rearend it goes back into 3 inch and dumps right under the rear valance. I havent heard anything like it on or off the track.

Bill · April 15th, 2006, 02:10 AM

ah the flowtech warlocks. never heard them on a stang before. do you un plug it as well. or just leave it plugged.

Bossman351 · April 15th, 2006, 02:21 AM

Thes ones dont have the caps. When the previous owner told me what all was done, the caps were one of the first thing I thought when he said it had warlocks on it. To be quite honest with you, I like the way it sounds going thru them. I figure even if they had the caps I would leave em on unless there were hp gains for uncapping them.

stangliter04 · April 15th, 2006, 08:17 AM

I am running a Mac prochamber (no cats) with a Mac flow path catback on a 2004 GT and I have to say its sounds pretty damn good and for the money I dont think you can beat it.

mdvaldosta · April 15th, 2006, 11:28 AM

Mac Longtubes
Offroad Mac Prochamber mid-pipe
Flowmaster 2 Chamber mufflers weled into a Magnaflow cat-back

AtlanticBlue99 · April 15th, 2006, 04:32 PM

Mac Long Tubes
Off Road H Pipe
Magnaflow Mufflers

(ceramac coated headers, all 2.5" stainless piping and 3" tips)

xx9gt6xx · April 17th, 2006, 05:52 PM

MAC O/R H PIPE w/ MAC FLOWPATH MUFFLERS. No headers yet, but thinking about doing a set of long tubes later on...

1slo5.0 · April 17th, 2006, 07:16 PM

Custom headers with 2 1/8 primarys and 3 1/2 X-pipe with 3 1/2 Flowmasters on a 90 LX.

gicantor2 · April 23rd, 2006, 06:53 PM

I have mac shorty headers, 2.5"mac o/r h-pipe and 2 1/4" flowmaster cat-back with 40's.I had just straight pipes off the headers right to the catback before but it had a lot of drone. The h-pipe made that go away. it sounds good at idle and great when you get on it. The neighbors don't like them very much. There on a 87 5.0 LX. Its a pretty loud setup. People turn around 2 blocks away to see what the noise is. I love IT!

173speed · May 1st, 2006, 07:18 PM

I have mac shorty 1 5/8 headers , pro chamber no cats x-pipe ,mac cat back with chrome tips for the price u cant go wrong with mac and they are not dumb loud at idle but sounds real good when u get on it

turp · May 1st, 2006, 08:10 PM

True duals with gutted pre-cats and straight pipes to Flowmaster delta 40's then back across to one side on my 75 Mustang 2.

orangeRcode · May 2nd, 2006, 11:38 PM

Bassani catted x
Borla Stingers

Get lots of compliments on them. They are louder than my buddy's Mach with Mac long tubes, prochamber, and magnaflows.

I have a set of SS Hooker long tubes and jet-hot coated offroad x that will be installed very soon. Should sound bad with the Borlas.

00SoSlow · May 3rd, 2006, 12:53 AM

just recently purchased

mac long tubes
mac h pipe

still waiting for them to come

going to buy magnaflow dual exhaust

stang fanatic · May 12th, 2006, 12:18 AM

factory shorty headers, homemade 2-1/2" h pipe with flowmaster 40's dumping just before the rear axle on an 87 gt makes 'em all look.....

WVSNS& · May 14th, 2006, 04:35 PM

I have bone stock exhaust manifolds, bone stock mids w/cats, and bone stock cat back on the 01 cobra. Sound, can't hear it! More engine noise inside than anything else. Wife won't let it git loud! AARGH!!!

Twist 2 Go · May 14th, 2006, 05:44 PM

2" long tube headers w/ 3-1/2" collectors, Dr Gas 3-1/2" x-pipe w/ Car Chemistry baffles and Dynomax Race Bullets w/ turndowns. Car has a nice sound to it but it is LOUD........

OTreborO · May 15th, 2006, 09:21 AM

Originally Posted by WVSNS&

I have bone stock exhaust manifolds, bone stock mids w/cats, and bone stock cat back on the 01 cobra. Sound, can't hear it! More engine noise inside than anything else. Wife won't let it git loud! AARGH!!!

Time to get a new wife...................

fast5.0lx · May 17th, 2006, 09:50 PM

i have bbk longtubes, bbk offroad x-pipe, and mac pro-dumps. it scares old women and small children.

April 15th, 2006, 12:13 AM	#1
Bill Hardcore Enthusiast Join Date: Aug 2005 Posts: 1,327	What's your setup What exhaust setup do you have on your mustangs??? and what year??? and what are your thought's of it??? This will give member's a idea of what people are running and what they think of it. right now i just got 40 series flows welded in on my 92 5.0 and it sounds pretty good. __________________ Too often, We lose sight of life's simple pleasures. Remember, when someone annoys you it takes 42 muscles in your face to frown, BUT, it only take 4 muscles to extend your arm and bitch-slap that Mother@#?!&! upside the head!!

April 15th, 2006, 01:04 AM	#3
Bossman351 Hardcore Enthusiast Join Date: Aug 2005 Location: On the trailer.......broke. Posts: 1,260	I have heddman hustler headers with a 3 inch collector going to 3 inch pipe straight back to Warlock chambered mufflers then into 2.5 inch pipe just to clear the rearend then once back over the rearend it goes back into 3 inch and dumps right under the rear valance. I havent heard anything like it on or off the track. __________________ http://www.moddedmustangs.com/forums...ic137.html.jpg

April 15th, 2006, 02:10 AM	#4
Bill Hardcore Enthusiast Join Date: Aug 2005 Posts: 1,327	ah the flowtech warlocks. never heard them on a stang before. do you un plug it as well. or just leave it plugged. __________________ Too often, We lose sight of life's simple pleasures. Remember, when someone annoys you it takes 42 muscles in your face to frown, BUT, it only take 4 muscles to extend your arm and bitch-slap that Mother@#?!&! upside the head!!

April 15th, 2006, 02:21 AM	#5
Bossman351 Hardcore Enthusiast Join Date: Aug 2005 Location: On the trailer.......broke. Posts: 1,260	Thes ones dont have the caps. When the previous owner told me what all was done, the caps were one of the first thing I thought when he said it had warlocks on it. To be quite honest with you, I like the way it sounds going thru them. I figure even if they had the caps I would leave em on unless there were hp gains for uncapping them. __________________ http://www.moddedmustangs.com/forums...ic137.html.jpg

April 15th, 2006, 08:17 AM	#6
stangliter04 Enthusiast Join Date: Aug 2005 Location: Port St. John Florida Posts: 853	I am running a Mac prochamber (no cats) with a Mac flow path catback on a 2004 GT and I have to say its sounds pretty damn good and for the money I dont think you can beat it. __________________ Silver 04 Cobra... with a Whipple

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

April 15th, 2006, 11:28 AM	#7
mdvaldosta Administrator 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,941	Mac Longtubes Offroad Mac Prochamber mid-pipe Flowmaster 2 Chamber mufflers weled into a Magnaflow cat-back

April 15th, 2006, 04:32 PM	#8
AtlanticBlue99 I Post Entirely Way Too Much 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: University of Georgia Posts: 8,865	Mac Long Tubes Off Road H Pipe Magnaflow Mufflers (ceramac coated headers, all 2.5" stainless piping and 3" tips) __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

April 17th, 2006, 05:52 PM	#9
xx9gt6xx Regular Join Date: Feb 2006 Location: Macomb Twp, Michigan Posts: 309	MAC O/R H PIPE w/ MAC FLOWPATH MUFFLERS. No headers yet, but thinking about doing a set of long tubes later on... __________________ ...Modded 1996 Ford Mustang GT... SOLD!! ...Modded 2001 Ford Mustang SVT Cobra... SOLD!! Now... ...Modded 2003 Ford Mustang SVT Cobra, Anniversary Edition.. www.cardomain.com/id/po1snd_u

April 17th, 2006, 07:16 PM	#10
1slo5.0 Zippee is my step sister. 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: Fond du Lac, Wisconsin Posts: 10,356	Custom headers with 2 1/8 primarys and 3 1/2 X-pipe with 3 1/2 Flowmasters on a 90 LX. __________________ Thanks to: Trick Flow, Team Z Motorsports, Total Engine Airflow and Furo Racecraft My daily driver has 16 cylinders and 4400hp @ 1000 rpm....

April 23rd, 2006, 06:53 PM	#11
gicantor2 Newbie Join Date: Apr 2006 Location: Thorold, ON, Canada Posts: 8	I have mac shorty headers, 2.5"mac o/r h-pipe and 2 1/4" flowmaster cat-back with 40's.I had just straight pipes off the headers right to the catback before but it had a lot of drone. The h-pipe made that go away. it sounds good at idle and great when you get on it. The neighbors don't like them very much. There on a 87 5.0 LX. Its a pretty loud setup. People turn around 2 blocks away to see what the noise is. I love IT!

May 1st, 2006, 07:18 PM	#12
173speed Enthusiast Join Date: Sep 2005 Location: NEW JERSEY Posts: 505	I have mac shorty 1 5/8 headers , pro chamber no cats x-pipe ,mac cat back with chrome tips for the price u cant go wrong with mac and they are not dumb loud at idle but sounds real good when u get on it __________________ http://www.moddedmustangs.com/hosted...rd-mustang.jpg SEEYAAAAAAAAAAAAAAAAAAAAA MOTHER @#$%

May 1st, 2006, 08:10 PM	#13
turp 1 Fast wheelchair 1989 MUSTANG LX 5.0 To slow to matter... Join Date: Aug 2005 Location: Pungo Baby! Posts: 2,940	True duals with gutted pre-cats and straight pipes to Flowmaster delta 40's then back across to one side on my 75 Mustang 2. __________________ SUPPORT YOUR LOCAL HOOKERS.... FLASH A TOW TRUCK DRIVER! Donate to lxhatch@gmail.com

May 2nd, 2006, 11:38 PM	#14
orangeRcode Hardcore Enthusiast 11.22@123 -150 shot Join Date: May 2006 Location: Mustang/Yukon, OK Posts: 1,804	Bassani catted x Borla Stingers Get lots of compliments on them. They are louder than my buddy's Mach with Mac long tubes, prochamber, and magnaflows. I have a set of SS Hooker long tubes and jet-hot coated offroad x that will be installed very soon. Should sound bad with the Borlas.

May 3rd, 2006, 12:53 AM	#15
00SoSlow Hardcore Enthusiast Join Date: Feb 2006 Location: Pewaukee, Wisconsin Posts: 1,340	just recently purchased mac long tubes mac h pipe still waiting for them to come going to buy magnaflow dual exhaust

Threads Similar to: What's your setup
Thread	Thread Starter	Forum	Replies	Last Post
anyone have this setup	KhaosGT	99-04	2	November 3rd, 2007 10:18 PM
Car setup	acehogg69	2005 - 2009	3	May 17th, 2007 07:17 AM
EFI Setup	litlegto	5.0 Mustangs	4	October 24th, 2006 12:09 PM
need help on SC setup	96stangboi	96-98	1	October 19th, 2006 01:22 PM
My M90 V6 Setup	ssajdowitz	V6 Mustangs	27	September 28th, 2006 11:21 PM

All times are GMT -4. The time now is 09:39 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2010, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

May 12th, 2006, 12:18 AM	#16
stang fanatic Enthusiast Join Date: May 2006 Location: El Paso, Tx Posts: 855	factory shorty headers, homemade 2-1/2" h pipe with flowmaster 40's dumping just before the rear axle on an 87 gt makes 'em all look..... __________________ "The gods too are fond of a joke." "If I had only known, I would have been a locksmith. "

May 14th, 2006, 04:35 PM	#17
WVSNS& Regular 2001 Mustang Cobra Join Date: Dec 2005 Location: va beach Posts: 192	, I have bone stock exhaust manifolds, bone stock mids w/cats, and bone stock cat back on the 01 cobra. Sound, can't hear it! More engine noise inside than anything else. Wife won't let it git loud! AARGH!!!

May 14th, 2006, 05:44 PM	#18
Twist 2 Go Hardcore Enthusiast Join Date: Aug 2005 Location: Chesapeake, Virginia Posts: 1,716	2" long tube headers w/ 3-1/2" collectors, Dr Gas 3-1/2" x-pipe w/ Car Chemistry baffles and Dynomax Race Bullets w/ turndowns. Car has a nice sound to it but it is LOUD........ __________________ 88 Mustang Coupe 2006 FFW Richmond True Street Runner-Up www.rickscarcare.net http://img146.imageshack.us/img146/2158/ricksadql2.jpg

May 17th, 2006, 09:50 PM	#20
fast5.0lx Newbie Join Date: May 2006 Posts: 29	i have bbk longtubes, bbk offroad x-pipe, and mac pro-dumps. it scares old women and small children. __________________ 96 mystic cobra #1979 out of 2000. 4.10's, cia, pro 5.0 shifter, bbk o/r x-pipe, single chamber flows, pro-m maf. 276rwhp 278rwtq.

What's your setup

What's your setup

,

Re: ,