Tips to Dumps

whtpny · February 8th, 2008, 02:09 AM

Just started wondering. I want a little more out of my exhaust, but I don't want to spend much right now. It's the factory 2.25" piping that the previous owner had some flows (40s i think) welded in place of the factory mufflers. Approximately how much would it cost to have dumps welded in place of the exits and how much would it change the sound..? I'm talking about volume, tone, etc, etc.. thanx.

whtpny · February 9th, 2008, 12:23 AM

bump

AtlanticBlue99 · February 14th, 2008, 10:06 AM

probably 25 bucks. i had tips for a couple years, then dumped it before the axle and it was just much louder interior wise than before. so after a while i went back to my magnaflow 14" long 2.5" stainless steel tips... but it is easy to just remove the tips and turn down - a little different than dumping right after the muffler and before the axle.

whtpny · February 14th, 2008, 11:39 AM

cool, thanks for the info. i'll probably end up sticking with tips for now i guess.

February 8th, 2008, 02:09 AM	#1
whtpny Hardcore Enthusiast 2002 Mustang GT Join Date: Feb 2007 Location: Gainesville, GA Posts: 1,743	Tips to Dumps Just started wondering. I want a little more out of my exhaust, but I don't want to spend much right now. It's the factory 2.25" piping that the previous owner had some flows (40s i think) welded in place of the factory mufflers. Approximately how much would it cost to have dumps welded in place of the exits and how much would it change the sound..? I'm talking about volume, tone, etc, etc.. thanx. __________________ Mods: Fidanza Al Flywheel, Steeda UDP, EMP/Stewart Components WP, PP Plenum, K&N FIPK, Mac Prochamber, Pypes Violator Catback WhtPny's Videos

February 9th, 2008, 12:23 AM	#2
whtpny Hardcore Enthusiast 2002 Mustang GT Join Date: Feb 2007 Location: Gainesville, GA Posts: 1,743	bump __________________ Mods: Fidanza Al Flywheel, Steeda UDP, EMP/Stewart Components WP, PP Plenum, K&N FIPK, Mac Prochamber, Pypes Violator Catback WhtPny's Videos

February 14th, 2008, 10:06 AM	#3
AtlanticBlue99 Administrator 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: UGA Posts: 7,519	probably 25 bucks. i had tips for a couple years, then dumped it before the axle and it was just much louder interior wise than before. so after a while i went back to my magnaflow 14" long 2.5" stainless steel tips... but it is easy to just remove the tips and turn down - a little different than dumping right after the muffler and before the axle. __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

February 14th, 2008, 11:39 AM	#4
whtpny Hardcore Enthusiast 2002 Mustang GT Join Date: Feb 2007 Location: Gainesville, GA Posts: 1,743	cool, thanks for the info. i'll probably end up sticking with tips for now i guess. __________________ Mods: Fidanza Al Flywheel, Steeda UDP, EMP/Stewart Components WP, PP Plenum, K&N FIPK, Mac Prochamber, Pypes Violator Catback WhtPny's Videos

Threads Similar to: Tips to Dumps
Thread	Thread Starter	Forum	Replies	Last Post
Magnaflow Dumps	NMR-2vGT	96-98	4	January 23rd, 2008 12:21 PM
Dumps	68 dlxcoupe	96-98	2	January 4th, 2008 11:12 AM
Where to buy pro dumps	Timm10221	94-95	4	August 7th, 2007 07:01 PM
Dumps...	the real shocker	99-04	6	April 16th, 2007 03:53 PM
Dumps...	FaStStAnG5-0	Exhaust	14	September 21st, 2006 09:39 AM

All times are GMT -4. The time now is 05:51 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.