moderator needed

free2.3 · January 11th, 2011, 10:03 PM

to all moderaters

ok so im a 4 cyl guy and ive had several people bump my thread in the 2.3 section just for a sticky. now i understand most people carless about the 2.3 stang but regardless those of us that do have them use them as daily drivers and need good information. now either you guys need to check the 2.3 section more often or appoint a regular 2.3 guy either zonker, ohc230, or myself i dont care to moderate it. because its a little ridiculous when i have to answer the same question 100times because theres no good info on maintaining the 2.3 or the a4ld trans stickyed. im not trying to be an ass or anything im just trying to be helpful thanks

jeremy

69fastback · January 11th, 2011, 10:14 PM

Ass

BWAL · January 11th, 2011, 10:16 PM

we HATE suggestions around here!

just kidding, send me some links to some threads you think should be stickied and i'll see what i think

free2.3 · January 11th, 2011, 10:20 PM

heres the main one EEC IV(91-93) For NOOBS

also heres another that includes that but covers a trans rebuild from another forum but its very good Read this before u ask any q's

93hatch · January 11th, 2011, 10:22 PM

I'm a mod, what can I do for you?

BWAL · January 11th, 2011, 10:23 PM

stuck the second one

free2.3 · January 11th, 2011, 10:24 PM

really i think the easyest way to avoid this is just to appoint a 2.3 mod, really y dont we have one anyway

free2.3 · January 11th, 2011, 10:24 PM

sweet thanks

BWAL · January 11th, 2011, 10:26 PM

the 2.3 section isn't really active enough to need a moderator. site mods are almost always available to take care of whatever needs to be done though, just report posts and PM one of us if you need to

6ER THEN I 8ER! · January 11th, 2011, 10:48 PM

Originally Posted by free2.3

really i think the easyest way to avoid this is just to appoint a 2.3 mod, really y dont we have one anyway

not enough of you from what i guess

WLJohnson05 · January 11th, 2011, 11:17 PM

we have a 2.3 section?

F8L GT · January 11th, 2011, 11:20 PM

Originally Posted by free2.3

its a little ridiculous when i have to answer the same question 100times
jeremy

Sounds like your in the 99-04 section about FI, gears, or exhaust or engine swaps

FastStang91Lx · January 11th, 2011, 11:44 PM

Or in the 5.0 section regarding explorer heads...

6ER THEN I 8ER! · January 12th, 2011, 01:51 AM

Originally Posted by F8L GT

Sounds like your in the 99-04 section about FI, gears, or exhaust or engine swaps

hey f8l...could you explain how gears work again

xn1919 · January 13th, 2011, 12:23 PM

Originally Posted by F8L GT

Sounds like your in the 99-04 section about FI, gears, or exhaust or engine swaps

+1 love you

January 11th, 2011, 10:03 PM	#1
free2.3 Regular FK UR HONDA Join Date: Jun 2010 Location: the glory hole Posts: 366 iTrader: 0 reviews	moderator needed to all moderaters ok so im a 4 cyl guy and ive had several people bump my thread in the 2.3 section just for a sticky. now i understand most people carless about the 2.3 stang but regardless those of us that do have them use them as daily drivers and need good information. now either you guys need to check the 2.3 section more often or appoint a regular 2.3 guy either zonker, ohc230, or myself i dont care to moderate it. because its a little ridiculous when i have to answer the same question 100times because theres no good info on maintaining the 2.3 or the a4ld trans stickyed. im not trying to be an ass or anything im just trying to be helpful thanks jeremy __________________ Nitrous is neat.... Fuel injection is sweet... but at the end of the day i'd rather be blown 91 Mustang hatch(AT) 91 Mustang hatch 2.3T

January 11th, 2011, 10:14 PM	#2
69fastback Premium Member 1969 Mustang Mach 1 6.824@101.61 Join Date: Aug 2006 Location: Oklahoma jackass, get to driving Posts: 5,573 iTrader: 0 reviews	Ass __________________ ./___ _ ____ ___ \. ( ]]] _ _ O _ _ [[[ ) \_ o _ _____ _ o _/ \|___\| ......... \|___\| http://www.youtube.com/watch?v=HyYU3...e_gdata_player

January 11th, 2011, 10:16 PM	#3
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,662 Blog Entries: 2 iTrader: 4 reviews	we HATE suggestions around here! just kidding, send me some links to some threads you think should be stickied and i'll see what i think __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

January 11th, 2011, 10:20 PM	#4
free2.3 Regular FK UR HONDA Join Date: Jun 2010 Location: the glory hole Posts: 366 iTrader: 0 reviews	heres the main one EEC IV(91-93) For NOOBS also heres another that includes that but covers a trans rebuild from another forum but its very good Read this before u ask any q's __________________ Nitrous is neat.... Fuel injection is sweet... but at the end of the day i'd rather be blown 91 Mustang hatch(AT) 91 Mustang hatch 2.3T

January 11th, 2011, 10:22 PM	#5
93hatch Banned 1992 Lx 11.39@119.24 Join Date: Jan 2008 Location: Az Posts: 11,644 iTrader: 0 reviews	I'm a mod, what can I do for you? __________________ [QUOTE=93mustank;2577445]We speed tested my right arm for quickness in shifts... So he could design the cam for proper shift recovery.[/QUOTE]

January 11th, 2011, 10:23 PM	#6
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,662 Blog Entries: 2 iTrader: 4 reviews	stuck the second one __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

January 11th, 2011, 10:24 PM	#7
free2.3 Regular FK UR HONDA Join Date: Jun 2010 Location: the glory hole Posts: 366 iTrader: 0 reviews	really i think the easyest way to avoid this is just to appoint a 2.3 mod, really y dont we have one anyway __________________ Nitrous is neat.... Fuel injection is sweet... but at the end of the day i'd rather be blown 91 Mustang hatch(AT) 91 Mustang hatch 2.3T

January 11th, 2011, 10:24 PM	#8
free2.3 Regular FK UR HONDA Join Date: Jun 2010 Location: the glory hole Posts: 366 iTrader: 0 reviews	sweet thanks __________________ Nitrous is neat.... Fuel injection is sweet... but at the end of the day i'd rather be blown 91 Mustang hatch(AT) 91 Mustang hatch 2.3T

January 11th, 2011, 10:26 PM	#9
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,662 Blog Entries: 2 iTrader: 4 reviews	the 2.3 section isn't really active enough to need a moderator. site mods are almost always available to take care of whatever needs to be done though, just report posts and PM one of us if you need to __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

January 11th, 2011, 11:17 PM	#11
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	we have a 2.3 section? __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

January 11th, 2011, 11:44 PM	#13
FastStang91Lx I Post Entirely Way Too Much 1991 Mustang LX 5.0 Join Date: Jan 2010 Location: Minnesota Posts: 5,572 iTrader: 2 reviews	Or in the 5.0 section regarding explorer heads... __________________ Point made in less than a few hours with minimal response. http://www.moddedmustangs.com/forums...ml#post4465184

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: moderator needed
Thread	Thread Starter	Forum	Replies	Last Post
Which moderator changes....	stanglifemike	The Clubhouse	10	September 11th, 2010 08:53 AM
Need a Moderator	ModularSteed	The Clubhouse	36	March 5th, 2010 01:25 PM
need help from a moderator	LPMotorsport	The Clubhouse	25	March 12th, 2009 11:07 PM
4.6 Moderator!	Casper98GT	96-98	12	January 3rd, 2008 02:12 AM

All times are GMT -4. The time now is 05:14 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.