Internals

droppedbass87 · March 9th, 2007, 11:50 AM

hey guys i was wondering where you cqan get a motor with forged internals already in it..and i dont want it to be bigger cammed and waste more gas..i just wanit ti to be able to hold twin turbo setup/...

94' Cobra 351 · March 9th, 2007, 05:46 PM

theres tons of places and sites that sell engines, just google it, or pick up a magazine at a local store and call a number.

neckbonekat · March 9th, 2007, 06:24 PM

On google you can find crate motors that are frged and SC already.

00vabchgt · March 9th, 2007, 06:36 PM

Originally Posted by neckbonekat

On google you can find crate motors that are frged and SC already.

Sean Hyland's got a beautiful one for about 15 grand. brings a tear to my eye.
http://www.seanhylandmotorsport.com/...-engines.shtml
grab a tissue before you click

neckbonekat · March 9th, 2007, 06:41 PM

Originally Posted by 00vabchgt

Originally Posted by neckbonekat

On google you can find crate motors that are frged and SC already.

Sean Hyland's got a beautiful one for about 15 grand. brings a tear to my eye.
http://www.seanhylandmotorsport.com/...-engines.shtml
grab a tissue before you click

That is the exact page I was thinking about when I said that. I like the $17,495.00 one at the very bottom. I believe that's a forged terminator engine.

droppedbass87 · March 10th, 2007, 01:57 AM

ok yeah thats just crazy im looking to spend 2000 to 3000..

neckbonekat · March 10th, 2007, 09:04 AM

Originally Posted by droppedbass87

ok yeah thats just crazy im looking to spend 2000 to 3000..

That means used and that means ebay or do a search on here somebody just asked this question last week.

droppedbass87 · March 10th, 2007, 03:09 PM

OH OK

94' Cobra 351 · March 10th, 2007, 06:35 PM

351!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DO IT!!!!!!!!!!!!!!!!!!!!!!!!!! BIGGER IS BETTER!!!!!!!!!!!!!!!!!!!!!!

raceruler03 · March 10th, 2007, 07:08 PM

actually a forged block is only about $3700 for a decently built 600hp block, but you have to get it put in and everything.

neckbonekat · March 10th, 2007, 10:08 PM

Originally Posted by raceruler03

actually a forged block is only about $3700 for a decently built 600hp block, but you have to get it put in and everything.

Yes, but you still have to buy the power adder and have it insalled too.

droppedbass87 · March 10th, 2007, 11:46 PM

haha noone is touching my cr but me and my dad lol..my dad owns a huge transmission shop...i cN DO IT MY SELF...

94' Cobra 351 · March 11th, 2007, 01:42 PM

Originally Posted by neckbonekat

Originally Posted by raceruler03

actually a forged block is only about $3700 for a decently built 600hp block, but you have to get it put in and everything.

Yes, but you still have to buy the power adder and have it insalled too.

POWER ADDER??? If you can get a block that is rated for 600 HP, you don't need a power adder. That is a lot of freakin power!!!! Unless you have a drag set up, that is more power than the car will be able to handle (traction wise) Not necessary to have any more that that much power.

neckbonekat · March 11th, 2007, 11:26 PM

Originally Posted by 94' Cobra 351

Originally Posted by neckbonekat

Originally Posted by raceruler03

actually a forged block is only about $3700 for a decently built 600hp block, but you have to get it put in and everything.

Yes, but you still have to buy the power adder and have it insalled too.

POWER ADDER??? If you can get a block that is rated for 600 HP, you don't need a power adder. That is a lot of freakin power!!!! Unless you have a drag set up, that is more power than the car will be able to handle (traction wise) Not necessary to have any more that that much power.

Just becaust the block is rated a 600 HP doesn't mean it automatically makes 600 HP. It means it can take 600 HP without blowing up.

94' Cobra 351 · March 12th, 2007, 04:49 PM

ahh yes, you are correct, i misread.

droppedbass87 · March 12th, 2007, 04:56 PM

well i saw forged parts and i think im going to buy them they come with the cobra crank also...around 13 or 1400 bucks...

B0B · March 21st, 2007, 02:19 AM

Originally Posted by droppedbass87

haha noone is touching my cr but me and my dad lol..my dad owns a huge transmission shop...i cN DO IT MY SELF...

+1

the only thing my car would go to the shop for would be to get dyno tuned. i would do everything myself. i have pulled and replaced many engines in my garage. if i cant figure it out, i learn how to do it, its just the way i am with my cars.

matrixpuba · March 21st, 2007, 02:47 AM

Originally Posted by neckbonekat

Originally Posted by 00vabchgt

Originally Posted by neckbonekat

On google you can find crate motors that are frged and SC already.

Sean Hyland's got a beautiful one for about 15 grand. brings a tear to my eye.
http://www.seanhylandmotorsport.com/...-engines.shtml
grab a tissue before you click

That is the exact page I was thinking about when I said that. I like the $17,495.00 one at the very bottom. I believe that's a forged terminator engine.

if you do a search on sean hyland on alot of other mustang forums you will se his products are not all that great.

1slo5.0 · March 21st, 2007, 09:20 AM

Originally Posted by droppedbass87

hey guys i was wondering where you cqan get a motor with forged internals already in it..and i dont want it to be bigger cammed and waste more gas..i just wanit ti to be able to hold twin turbo setup/...

Wasting money on forged internals in a stock 5 liter block is a waste of money.

mikebert · March 21st, 2007, 11:56 AM

Originally Posted by Darrell

Originally Posted by droppedbass87

hey guys i was wondering where you cqan get a motor with forged internals already in it..and i dont want it to be bigger cammed and waste more gas..i just wanit ti to be able to hold twin turbo setup/...

Wasting money on forged internals in a stock 5 liter block is a waste of money.

You can put boost into a 5.0 without blowing it up. However, if you're going to put a lot of power int here, you need a new, stronger block before you need new internals.

March 9th, 2007, 11:50 AM	#1
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,894 iTrader: 0 reviews	Internals hey guys i was wondering where you cqan get a motor with forged internals already in it..and i dont want it to be bigger cammed and waste more gas..i just wanit ti to be able to hold twin turbo setup/...

March 9th, 2007, 06:24 PM	#3
neckbonekat I Post Entirely Way Too Much 2005 Cadillac STS V8 ???????????????? Join Date: Dec 2006 Location: Upstate NY Posts: 6,344 iTrader: 3 reviews	On google you can find crate motors that are frged and SC already. __________________ ITEMS FOR SALE! 4.10 GEARS + BEARING KIT

March 10th, 2007, 01:57 AM	#6
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,894 iTrader: 0 reviews	ok yeah thats just crazy im looking to spend 2000 to 3000.. __________________ fraziers transmission service..

March 10th, 2007, 03:09 PM	#8
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,894 iTrader: 0 reviews	OH OK __________________ fraziers transmission service..

March 10th, 2007, 07:08 PM	#10
raceruler03 Enthusiast 2000 mustang gt Join Date: Aug 2006 Location: georgia Posts: 913 iTrader: 0 reviews	actually a forged block is only about $3700 for a decently built 600hp block, but you have to get it put in and everything. __________________ http://i157.photobucket.com/albums/t...donecopy-1.jpg

Internals

Internals

Re: Internals

Re: Internals

March 9th, 2007, 05:46 PM	#2
94' Cobra 351 Regular Join Date: Dec 2006 Posts: 480 iTrader: 0 reviews	theres tons of places and sites that sell engines, just google it, or pick up a magazine at a local store and call a number.

March 10th, 2007, 06:35 PM	#9
94' Cobra 351 Regular Join Date: Dec 2006 Posts: 480 iTrader: 0 reviews	351!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! DO IT!!!!!!!!!!!!!!!!!!!!!!!!!! BIGGER IS BETTER!!!!!!!!!!!!!!!!!!!!!!

March 10th, 2007, 11:46 PM	#12
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,894 iTrader: 0 reviews	haha noone is touching my cr but me and my dad lol..my dad owns a huge transmission shop...i cN DO IT MY SELF... __________________ fraziers transmission service..

March 12th, 2007, 04:49 PM	#15
94' Cobra 351 Regular Join Date: Dec 2006 Posts: 480 iTrader: 0 reviews	ahh yes, you are correct, i misread.

March 12th, 2007, 04:56 PM	#16
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,894 iTrader: 0 reviews	well i saw forged parts and i think im going to buy them they come with the cobra crank also...around 13 or 1400 bucks... __________________ fraziers transmission service..

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Internals
Thread	Thread Starter	Forum	Replies	Last Post
Internals	01silversnake	99-04	9	October 17th, 2007 07:57 PM
new internals	bone_crusher	V6 Mustangs	55	October 3rd, 2007 04:35 PM
Going to forged internals...what to get?	ltsmash1200	99-04	7	April 22nd, 2007 11:08 PM
01 GT Internals	MnrlGry01gt	99-04	12	November 13th, 2006 12:59 AM
Upgrading Internals	energiesource	99-04	3	October 2nd, 2006 01:04 AM

All times are GMT -4. The time now is 03:12 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.