What's your setup

Bill · April 15th, 2006, 12:13 AM

What exhaust setup do you have on your mustangs??? and what year??? and what are your thought's of it???

This will give member's a idea of what people are running and what they think of it.

right now i just got 40 series flows welded in on my 92 5.0 and it sounds pretty good.

Drgnracin72 · April 15th, 2006, 12:19 AM

I AM RUNNING BBK LONG TUBE HEADERS WITH NO CATS, X-PIPE WITH FLOMASTERS DUMPED UNDER THE REAR SEAT. IT SOUNDS VERY VERY BADASS

Bossman351 · April 15th, 2006, 01:04 AM

I have heddman hustler headers with a 3 inch collector going to 3 inch pipe straight back to Warlock chambered mufflers then into 2.5 inch pipe just to clear the rearend then once back over the rearend it goes back into 3 inch and dumps right under the rear valance. I havent heard anything like it on or off the track.

Bill · April 15th, 2006, 02:10 AM

ah the flowtech warlocks. never heard them on a stang before. do you un plug it as well. or just leave it plugged.

Bossman351 · April 15th, 2006, 02:21 AM

Thes ones dont have the caps. When the previous owner told me what all was done, the caps were one of the first thing I thought when he said it had warlocks on it. To be quite honest with you, I like the way it sounds going thru them. I figure even if they had the caps I would leave em on unless there were hp gains for uncapping them.

stangliter04 · April 15th, 2006, 08:17 AM

I am running a Mac prochamber (no cats) with a Mac flow path catback on a 2004 GT and I have to say its sounds pretty damn good and for the money I dont think you can beat it.

mdvaldosta · April 15th, 2006, 11:28 AM

Mac Longtubes
Offroad Mac Prochamber mid-pipe
Flowmaster 2 Chamber mufflers weled into a Magnaflow cat-back

AtlanticBlue99 · April 15th, 2006, 04:32 PM

Mac Long Tubes
Off Road H Pipe
Magnaflow Mufflers

(ceramac coated headers, all 2.5" stainless piping and 3" tips)

xx9gt6xx · April 17th, 2006, 05:52 PM

MAC O/R H PIPE w/ MAC FLOWPATH MUFFLERS. No headers yet, but thinking about doing a set of long tubes later on...

1slo5.0 · April 17th, 2006, 07:16 PM

Custom headers with 2 1/8 primarys and 3 1/2 X-pipe with 3 1/2 Flowmasters on a 90 LX.

gicantor2 · April 23rd, 2006, 06:53 PM

I have mac shorty headers, 2.5"mac o/r h-pipe and 2 1/4" flowmaster cat-back with 40's.I had just straight pipes off the headers right to the catback before but it had a lot of drone. The h-pipe made that go away. it sounds good at idle and great when you get on it. The neighbors don't like them very much. There on a 87 5.0 LX. Its a pretty loud setup. People turn around 2 blocks away to see what the noise is. I love IT!

173speed · May 1st, 2006, 07:18 PM

I have mac shorty 1 5/8 headers , pro chamber no cats x-pipe ,mac cat back with chrome tips for the price u cant go wrong with mac and they are not dumb loud at idle but sounds real good when u get on it

turp · May 1st, 2006, 08:10 PM

True duals with gutted pre-cats and straight pipes to Flowmaster delta 40's then back across to one side on my 75 Mustang 2.

orangeRcode · May 2nd, 2006, 11:38 PM

Bassani catted x
Borla Stingers

Get lots of compliments on them. They are louder than my buddy's Mach with Mac long tubes, prochamber, and magnaflows.

I have a set of SS Hooker long tubes and jet-hot coated offroad x that will be installed very soon. Should sound bad with the Borlas.

00SoSlow · May 3rd, 2006, 12:53 AM

just recently purchased

mac long tubes
mac h pipe

still waiting for them to come

going to buy magnaflow dual exhaust

stang fanatic · May 12th, 2006, 12:18 AM

factory shorty headers, homemade 2-1/2" h pipe with flowmaster 40's dumping just before the rear axle on an 87 gt makes 'em all look.....

WVSNS& · May 14th, 2006, 04:35 PM

I have bone stock exhaust manifolds, bone stock mids w/cats, and bone stock cat back on the 01 cobra. Sound, can't hear it! More engine noise inside than anything else. Wife won't let it git loud! AARGH!!!

Twist 2 Go · May 14th, 2006, 05:44 PM

2" long tube headers w/ 3-1/2" collectors, Dr Gas 3-1/2" x-pipe w/ Car Chemistry baffles and Dynomax Race Bullets w/ turndowns. Car has a nice sound to it but it is LOUD........

OTreborO · May 15th, 2006, 09:21 AM

Originally Posted by WVSNS&

I have bone stock exhaust manifolds, bone stock mids w/cats, and bone stock cat back on the 01 cobra. Sound, can't hear it! More engine noise inside than anything else. Wife won't let it git loud! AARGH!!!

Time to get a new wife...................

fast5.0lx · May 17th, 2006, 09:50 PM

i have bbk longtubes, bbk offroad x-pipe, and mac pro-dumps. it scares old women and small children.

April 15th, 2006, 12:13 AM	#1
Bill Hardcore Enthusiast Join Date: Aug 2005 Posts: 1,327 iTrader: 0 reviews	What's your setup What exhaust setup do you have on your mustangs??? and what year??? and what are your thought's of it??? This will give member's a idea of what people are running and what they think of it. right now i just got 40 series flows welded in on my 92 5.0 and it sounds pretty good. __________________ Too often, We lose sight of life's simple pleasures. Remember, when someone annoys you it takes 42 muscles in your face to frown, BUT, it only take 4 muscles to extend your arm and bitch-slap that Mother@#?!&! upside the head!!

April 15th, 2006, 12:19 AM	#2
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,635 iTrader: 2 reviews	I AM RUNNING BBK LONG TUBE HEADERS WITH NO CATS, X-PIPE WITH FLOMASTERS DUMPED UNDER THE REAR SEAT. IT SOUNDS VERY VERY BADASS __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

April 15th, 2006, 01:04 AM	#3
Bossman351 Hardcore Enthusiast Join Date: Aug 2005 Location: On the trailer.......broke. Posts: 1,258 iTrader: 0 reviews	I have heddman hustler headers with a 3 inch collector going to 3 inch pipe straight back to Warlock chambered mufflers then into 2.5 inch pipe just to clear the rearend then once back over the rearend it goes back into 3 inch and dumps right under the rear valance. I havent heard anything like it on or off the track. __________________

April 15th, 2006, 02:10 AM	#4
Bill Hardcore Enthusiast Join Date: Aug 2005 Posts: 1,327 iTrader: 0 reviews	ah the flowtech warlocks. never heard them on a stang before. do you un plug it as well. or just leave it plugged. __________________ Too often, We lose sight of life's simple pleasures. Remember, when someone annoys you it takes 42 muscles in your face to frown, BUT, it only take 4 muscles to extend your arm and bitch-slap that Mother@#?!&! upside the head!!

April 15th, 2006, 02:21 AM	#5
Bossman351 Hardcore Enthusiast Join Date: Aug 2005 Location: On the trailer.......broke. Posts: 1,258 iTrader: 0 reviews	Thes ones dont have the caps. When the previous owner told me what all was done, the caps were one of the first thing I thought when he said it had warlocks on it. To be quite honest with you, I like the way it sounds going thru them. I figure even if they had the caps I would leave em on unless there were hp gains for uncapping them. __________________

April 15th, 2006, 08:17 AM	#6
stangliter04 Enthusiast Join Date: Aug 2005 Location: Port St. John Florida Posts: 849 iTrader: 2 reviews	I am running a Mac prochamber (no cats) with a Mac flow path catback on a 2004 GT and I have to say its sounds pretty damn good and for the money I dont think you can beat it. __________________ Silver 04 Cobra... with a Whipple

April 15th, 2006, 11:28 AM	#7
mdvaldosta MM Fanatic 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,940 iTrader: 0 reviews	Mac Longtubes Offroad Mac Prochamber mid-pipe Flowmaster 2 Chamber mufflers weled into a Magnaflow cat-back

April 15th, 2006, 04:32 PM	#8
AtlanticBlue99 I Post Entirely Way Too Much 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: University of Georgia Posts: 8,854 Blog Entries: 1 iTrader: 0 reviews	Mac Long Tubes Off Road H Pipe Magnaflow Mufflers (ceramac coated headers, all 2.5" stainless piping and 3" tips) __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

April 17th, 2006, 05:52 PM	#9
xx9gt6xx Regular Join Date: Feb 2006 Location: Macomb Twp, Michigan Posts: 309 iTrader: 0 reviews	MAC O/R H PIPE w/ MAC FLOWPATH MUFFLERS. No headers yet, but thinking about doing a set of long tubes later on... __________________ ...Modded 1996 Ford Mustang GT... SOLD!! ...Modded 2001 Ford Mustang SVT Cobra... SOLD!! Now... ...Modded 2003 Ford Mustang SVT Cobra, Anniversary Edition.. www.cardomain.com/id/po1snd_u

April 17th, 2006, 07:16 PM	#10
1slo5.0 MM Ninjas! 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: North Fond du Lac, Wisconsin Posts: 11,375 iTrader: 1 reviews	Custom headers with 2 1/8 primarys and 3 1/2 X-pipe with 3 1/2 Flowmasters on a 90 LX. __________________ My daily driver has 16 cylinders and 4400hp @ 1000 rpm.... ***1988 Mustang GT - Stock....almost

April 23rd, 2006, 06:53 PM	#11
gicantor2 Newbie Join Date: Apr 2006 Location: Thorold, ON, Canada Posts: 8 iTrader: 0 reviews	I have mac shorty headers, 2.5"mac o/r h-pipe and 2 1/4" flowmaster cat-back with 40's.I had just straight pipes off the headers right to the catback before but it had a lot of drone. The h-pipe made that go away. it sounds good at idle and great when you get on it. The neighbors don't like them very much. There on a 87 5.0 LX. Its a pretty loud setup. People turn around 2 blocks away to see what the noise is. I love IT!

May 1st, 2006, 07:18 PM	#12
173speed Enthusiast Join Date: Sep 2005 Location: NEW JERSEY Posts: 505 iTrader: 0 reviews	I have mac shorty 1 5/8 headers , pro chamber no cats x-pipe ,mac cat back with chrome tips for the price u cant go wrong with mac and they are not dumb loud at idle but sounds real good when u get on it __________________ SEEYAAAAAAAAAAAAAAAAAAAAA MOTHER @#$%

May 1st, 2006, 08:10 PM	#13
turp My Stallion is Bigger! 1989 Eddie Bauer Bronco 3 feet... Join Date: Aug 2005 Location: VA Beach Posts: 3,012 iTrader: 0 reviews	True duals with gutted pre-cats and straight pipes to Flowmaster delta 40's then back across to one side on my 75 Mustang 2. __________________

May 2nd, 2006, 11:38 PM	#14
orangeRcode Hardcore Enthusiast 11.21@123 -150 shot Join Date: May 2006 Location: Mustang/Yukon, OK Posts: 1,828 iTrader: 1 reviews	Bassani catted x Borla Stingers Get lots of compliments on them. They are louder than my buddy's Mach with Mac long tubes, prochamber, and magnaflows. I have a set of SS Hooker long tubes and jet-hot coated offroad x that will be installed very soon. Should sound bad with the Borlas.

May 3rd, 2006, 12:53 AM	#15
00SoSlow Hardcore Enthusiast Join Date: Feb 2006 Location: Pewaukee, Wisconsin Posts: 1,340 iTrader: 0 reviews	just recently purchased mac long tubes mac h pipe still waiting for them to come going to buy magnaflow dual exhaust

May 17th, 2006, 09:50 PM	#20
fast5.0lx Regular 1988 Mustang GT 31.35@55 Join Date: May 2006 Location: Lovington NM Posts: 120 iTrader: 0 reviews	i have bbk longtubes, bbk offroad x-pipe, and mac pro-dumps. it scares old women and small children. __________________ 88 gt 5spd. twisted wedge 170's, tfs stage1 cam, fms 1.72rr, edey rpm air gap intake, holley 650 ultra dp, full msd ignition, BBK full length headers, off-road x-pipe, mac pro-dump exhaust, 4.10 gears, pro 5.0 short shifter

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

May 12th, 2006, 12:18 AM	#16
stang fanatic Enthusiast Join Date: May 2006 Location: El Paso, Tx Posts: 861 iTrader: 0 reviews	factory shorty headers, homemade 2-1/2" h pipe with flowmaster 40's dumping just before the rear axle on an 87 gt makes 'em all look..... __________________ "The gods too are fond of a joke." "If I had only known, I would have been a locksmith. "

May 14th, 2006, 04:35 PM	#17
WVSNS& Regular 2001 Mustang Cobra Join Date: Dec 2005 Location: va beach Posts: 214 iTrader: 0 reviews	, I have bone stock exhaust manifolds, bone stock mids w/cats, and bone stock cat back on the 01 cobra. Sound, can't hear it! More engine noise inside than anything else. Wife won't let it git loud! AARGH!!!

May 14th, 2006, 05:44 PM	#18
Twist 2 Go Hardcore Enthusiast Join Date: Aug 2005 Location: Chesapeake, Virginia Posts: 1,716 iTrader: 0 reviews	2" long tube headers w/ 3-1/2" collectors, Dr Gas 3-1/2" x-pipe w/ Car Chemistry baffles and Dynomax Race Bullets w/ turndowns. Car has a nice sound to it but it is LOUD........ __________________ 88 Mustang Coupe 2006 FFW Richmond True Street Runner-Up www.rickscarcare.net

Threads Similar to: What's your setup
Thread	Thread Starter	Forum	Replies	Last Post
anyone have this setup	KhaosGT	99-04	2	November 3rd, 2007 10:18 PM
Car setup	acehogg69	2005 - 2010	3	May 17th, 2007 07:17 AM
EFI Setup	litlegto	5.0 Mustangs	4	October 24th, 2006 12:09 PM
need help on SC setup	96stangboi	96-98	1	October 19th, 2006 01:22 PM
My M90 V6 Setup	ssajdowitz	V6 Mustangs	27	September 28th, 2006 11:21 PM

All times are GMT -4. The time now is 07:15 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

What's your setup

What's your setup

,

Re: ,