clutch/flywheel advice?

blkstang_gt · April 18th, 2011, 12:23 AM

Hi everyone, new to MM and finally picked up a decent stang for myself after many years of wanting one, but family first type of deal. OK, well here it is. I picked up a 2000 GT with 48K on it. The guy I bought it off of had just put in a clutch at a mom and pop garage. They definately did not even resurface the flywheel, nor (guessing now) replace throw out bearing. I have a ton of chatter and "clicking" from clutch/flywheel. My question is, what clutch and flywheel combo should i put in this car. Stock motor (for now). Dont plan on big power any time soon.

bullitt1680 · April 18th, 2011, 01:51 AM

I run a Spec on my car and it gets the job done...do some research first (Google), then make a post in the 99-04 section if you still need the help.

blkstang_gt · April 18th, 2011, 11:11 PM

ok, thanks for the advice. still tryin to learn the forum so i will look for 99 04. thanks again!

robb15033 · April 22nd, 2011, 11:12 AM

I installed a SPEC Stage1 and a SPEC Steel Billit Flywheel. Great!

blkstang_gt · April 23rd, 2011, 08:34 PM

im definately goin with the billit steel instead of alum. thanks guys for the ideas

since that post. my tranny shit the bed as well......CRAP!!! now i need t45 parts

April 18th, 2011, 12:23 AM	#1
blkstang_gt Regular 2000 Mustang GT no et's yet Join Date: Apr 2011 Location: Monaca, PA Posts: 52 iTrader: 0 reviews	clutch/flywheel advice? Hi everyone, new to MM and finally picked up a decent stang for myself after many years of wanting one, but family first type of deal. OK, well here it is. I picked up a 2000 GT with 48K on it. The guy I bought it off of had just put in a clutch at a mom and pop garage. They definately did not even resurface the flywheel, nor (guessing now) replace throw out bearing. I have a ton of chatter and "clicking" from clutch/flywheel. My question is, what clutch and flywheel combo should i put in this car. Stock motor (for now). Dont plan on big power any time soon.

April 18th, 2011, 01:51 AM	#2
bullitt1680 Irregular 2001 Mustang Bullitt DHG Join Date: Jun 2010 Location: Greenville, SC Posts: 1,176 iTrader: 0 reviews	I run a Spec on my car and it gets the job done...do some research first (Google), then make a post in the 99-04 section if you still need the help. __________________ Vortech V2 Non I/C 377rwhp and 365 rwtq

April 22nd, 2011, 11:12 AM	#4
robb15033 Regular 1997 Mustang 3.8 Join Date: Oct 2010 Location: Northern Virginia Posts: 216 iTrader: 0 reviews	I installed a SPEC Stage1 and a SPEC Steel Billit Flywheel. Great! __________________ '97 3.8 MODIFIED

Threads Similar to: clutch/flywheel advice?
Thread	Thread Starter	Forum	Replies	Last Post
need advice on clutch/flywheel for 2002 gt	quickndslick2	99-04	5	February 23rd, 2010 04:23 PM
Clutch flywheel help	svtkidd23	99-04	17	March 18th, 2009 04:26 PM
Clutch And Flywheel Kit	dcruz1255	4V / SVT	5	October 10th, 2008 12:25 PM
New Clutch w/ Flywheel ???	Montanasvt	4V / SVT	8	January 25th, 2008 01:12 AM

April 18th, 2011, 11:11 PM	#3
blkstang_gt Regular 2000 Mustang GT no et's yet Join Date: Apr 2011 Location: Monaca, PA Posts: 52 iTrader: 0 reviews	ok, thanks for the advice. still tryin to learn the forum so i will look for 99 04. thanks again!

April 23rd, 2011, 08:34 PM	#5
blkstang_gt Regular 2000 Mustang GT no et's yet Join Date: Apr 2011 Location: Monaca, PA Posts: 52 iTrader: 0 reviews	im definately goin with the billit steel instead of alum. thanks guys for the ideas since that post. my tranny shit the bed as well......CRAP!!! now i need t45 parts

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 03:37 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.