Schrader valve... fuel rails?

flattusmaximus78 · June 3rd, 2007, 02:31 AM

Is that little cap thing that looks like the one from a bicycle tube my schrader valve?

And if it isn't were can I locate it. I'm going nitrous and was hoping my fuel rails would be a littler closer to the intake and if this is my schrader valve its PRETTY far.

TurboLX · June 3rd, 2007, 08:48 AM

that pic isnt all that great but it looks like it

03 R Code · June 4th, 2007, 04:41 PM

I'm pretty sure that underneath that cap is the valve. The kit you ordered should be specific to your car, and come with enough line to reach from there back to where you mount your solenoids.

droppedbass87 · June 4th, 2007, 05:06 PM

yeah thats it..turn the car off let it sit to let pressure off and then take the cap off and bleed any gas out by pressing in the valve core stem..wipe any gas off then use a small crescent wrench to take it off and replace it with the one they send you..i have an nx kit and ordered a 3 ft fuel line to reach to my intake..

June 3rd, 2007, 02:31 AM	#1
flattusmaximus78 I Post Entirely Way Too Much 1993 5.ohhhh 12.97 @140mph Join Date: Apr 2006 Location: Gatorland Posts: 6,122 iTrader: 3 reviews	Schrader valve... fuel rails? Is that little cap thing that looks like the one from a bicycle tube my schrader valve? And if it isn't were can I locate it. I'm going nitrous and was hoping my fuel rails would be a littler closer to the intake and if this is my schrader valve its PRETTY far. __________________ 02 Pewter z28, hoosiers/lid/exhaust/spray...125mph 1993 gt Sold, already missed --Moates Quarter horse $225-- --Cobra intake $150-- --tremec 3550 bell and shifter $1100--

June 3rd, 2007, 08:48 AM	#2
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,778 Blog Entries: 1 iTrader: 0 reviews	that pic isnt all that great but it looks like it __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

June 4th, 2007, 04:41 PM	#3
03 R Code MM Fanatic unstoppable @ speed of light Join Date: Jul 2006 Location: Knees deep in dat ass Posts: 3,104 iTrader: 0 reviews	I'm pretty sure that underneath that cap is the valve. The kit you ordered should be specific to your car, and come with enough line to reach from there back to where you mount your solenoids. __________________ Political correctness is a doctrine fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

June 4th, 2007, 05:06 PM	#4
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,894 iTrader: 0 reviews	yeah thats it..turn the car off let it sit to let pressure off and then take the cap off and bleed any gas out by pressing in the valve core stem..wipe any gas off then use a small crescent wrench to take it off and replace it with the one they send you..i have an nx kit and ordered a 3 ft fuel line to reach to my intake.. __________________ fraziers transmission service..

Threads Similar to: Schrader valve... fuel rails?
Thread	Thread Starter	Forum	Replies	Last Post
Fuel Rails	Euroeater95	94-95	9	August 31st, 2007 03:10 PM
Schrader valve... fuel rails?	flattusmaximus78	V6 Mustangs	2	June 3rd, 2007 09:42 AM
Help! Fuel Rails	Skullman	General Tech	0	September 24th, 2006 08:09 PM
Holley Fuel Rails	Skullman	96-98	0	September 24th, 2006 01:52 PM
fuel rails	03stanger	General Tech	0	June 8th, 2006 07:17 PM

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 05:28 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.