![]() | ![]() | |||||||||||
| ||||||||||||
|
|||||||
Discussing I give up... my car is falling apart in the General Tech Forum. I don't know what is all wrong with it, makes noises, exhaust leak, check ... Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free! |
|
|
LinkBack | Thread Tools |
|
|
#1 |
|
Hardcore Enthusiast
Join Date: Feb 2006
Location: Pewaukee, Wisconsin
Posts: 1,341
|
I give up... my car is falling apart
I don't know what is all wrong with it, makes noises, exhaust leak, check engine light is on, and i could care less right about now........ can someone send me like a million dollars so i can fix it all good, or even buy a different car!!!!!!!!!!!!!!!!!!!!!!
__________________
2000 V6 Performance Red @ Cardomain Was fun but a waste... 1987 LX Hatch | Soon to be a 600hp monster |
| Sponsored Links | Remove Advertisements |
| Forums at Modded Mustangs Advertisement |
|
|
#2 |
|
Enthusiast
Join Date: Jun 2006
Location: Knoxville, TN
Posts: 616
|
I think more than 90% of the people on this board have thought what you are thinking right now at one point in time. Just take it one at a time and you get through it and get some experience with it.
__________________
95 Mustang GT Slow Bolt On Car http://img61.imageshack.us/img61/8386/sig4rx2.jpg www.steelcitystangs.com |
|
|
#3 |
|
Slayer of Douchebags
mustangless
Join Date: Jan 2006
Location: PURCELL, OKLAHOMA
Posts: 9,355
|
yep be patient with it! dont stick a bomb in it yet!!!!!
__________________
![]() NUKE THE UNBORN GAY BABY WHALES FOR JESUS |
|
|
#4 |
|
Enthusiast
Join Date: Jun 2006
Location: Knoxville, TN
Posts: 616
|
Just remember that you get a lot of experience if shit breaks when you are working on it.
__________________
95 Mustang GT Slow Bolt On Car http://img61.imageshack.us/img61/8386/sig4rx2.jpg www.steelcitystangs.com |
|
|
#5 |
|
Hardcore Enthusiast
Join Date: Feb 2006
Location: Pewaukee, Wisconsin
Posts: 1,341
|
yea so basically i just spent 67 bucks on an engine dressup peice that i didn't need... good work on my part, o well at least its new on the positive side
__________________
2000 V6 Performance Red @ Cardomain Was fun but a waste... 1987 LX Hatch | Soon to be a 600hp monster |
|
|
#6 | |
|
Enthusiast
Join Date: Apr 2006
Posts: 639
|
Oh well
__________________
"Those who forget the past are condemned to repeat it" Rev. Jim Jones |
|
|
|
#7 |
|
Slayer of Douchebags
mustangless
Join Date: Jan 2006
Location: PURCELL, OKLAHOMA
Posts: 9,355
|
hahahahahahahahahaha thats great
__________________
![]() NUKE THE UNBORN GAY BABY WHALES FOR JESUS |
|
|
#8 | |
|
Enthusiast
Join Date: Apr 2006
Posts: 639
|
__________________
"Those who forget the past are condemned to repeat it" Rev. Jim Jones |
|
|
|
#9 |
|
Hardcore Enthusiast
Join Date: Jul 2006
Location: Rapid City, SD (about 4 miles)
Posts: 1,071
|
Ya don't give up, I just got mine 3 months ago and already found problems. I'm not going to give up on this car. On mine, some guy said that the computer was reading that my Gas sensor was going off, saying it wasn't tight enough... even tho I give it a good 2 or 3 rotations after I hit the click. Also said it might be the exhaust system, getting too hot or whatever bs they said.
__________________
"Look up!" |
|
|
#10 |
|
Newbie
Join Date: Jul 2006
Posts: 11
|
cars are NEVER done. something will always pop up when something else if 'finished' like he said. one item at a time. and remember to BREATHE
__________________
iwinz wagownd i <3 my 289 |
|
|
#11 | ||
|
MuchCoolerThanGTsetGO
2002 Mustang GT
SLOW
Join Date: Jun 2006
Location: Shepherdsville, Kentucky
Posts: 16,286
|
I think everyone gets fed-up with their car at times...Just take it one piece at a time... |
||
|
|
#12 |
|
The Nice Guy
1999 Ford Mustang V6
14.79 @ 92.15
Join Date: Aug 2005
Location: University of Georgia
Posts: 8,310
|
I have felt like giving up on my car evertime something broke. From a bad seal between my intake manifolds to a broken tranny and dead battery and alternator on a rainy day away from home. Fixing the broken is what makes it personal, and that makes it all the more enjoyable. Hell, with me being 17 and having all of this money in my car, I just pray that nothing breaks because if it is too big, I can't afford to fix it... Hang in there and take it piece by piece.
Scan your OBDII codes and post them up. You EGR thing could be something very simple. Did you get O2 sensor extending harness and MIL Eliminators when you installed the longtubes? I bet all of your troubles are all tied into the exhaust setup you put on. If you didn't go over all of the head bolts, EGR connections, a retighten the mid pipe and cat back bolts, then chances are you will have a million leaks that make an annoying "ticking" sound when you accelerate. Just tell us what is wrong and piece by piece, we will guide you into enjoying your car again.
__________________
ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.
|
|
|
#13 | |
|
Regular
Join Date: Mar 2006
Location: Cherryville, NC
Posts: 155
|
Re: I give up... my car is falling apart
hhhmmmm..... that discription sounds like my car!!!
__________________
http://i46.photobucket.com/albums/f1...achine_124.jpg my vehicles: 1996 Mustang v6 232 ci 1969 F100 stepside inline six 300 ci www.mooresvilledragway.com www.shadysidedragway.com |
|
|
|
#14 |
|
Hardcore Enthusiast
Join Date: Feb 2006
Location: Pewaukee, Wisconsin
Posts: 1,341
|
well right now when i idle i hear the tick, yea it pisses me off, im constantly repostioning and tightening the bolts to try to make a new seal... doesn't work, and when i drive about 25-30 mph at constant my shifter shakes side to side violently and seems like the engine wants to cut out or something so i have to tap the gas to stop this from happening... people said its the dpfe but like i said in the other one why should i spend another 100 on this and its a hit or miss, everytime i turn right or left my steering makes a noise. like my bushings or something are going bad or power steering is going out, it even makes it when im sitting still and move the wheel right or left, and basically my rear driver side strut or shock what ever it is, is going bad becuase when i am at my friends in his driveway it looks lowered and the other side still has plenty of room
I NEED HELP
__________________
2000 V6 Performance Red @ Cardomain Was fun but a waste... 1987 LX Hatch | Soon to be a 600hp monster |
|
|
#15 |
|
Enthusiast
Join Date: Aug 2005
Location: Port St. John Florida
Posts: 768
|
I just got a supercharger on and I hate my car right now!! errrrrrr
|
|
|
#16 |
|
The Nice Guy
1999 Ford Mustang V6
14.79 @ 92.15
Join Date: Aug 2005
Location: University of Georgia
Posts: 8,310
|
Well, make sure your gaskets are good and seals are good on the exhaust. If the shifter problem continues and the car slugs out, consider getting a new tune for the ecu. Replacing the rear shock is very easy and cheap:
http://www.moddedmustangs.com/mach1-...t-install.html Good luck man. Keep us posted.
__________________
ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.
|
|
|
#17 |
|
Regular
Join Date: Mar 2006
Location: Amarillo, TX
Posts: 92
|
Here is my opinion for what it is worth. Modifying any car, be it a Mustang, Camaro, etc. can and will always be a learning experience, but there is always someone out there that has been there and done that that can assist with the problems. With most problems of this nature, especially with the newer cars (ones with computer controlled powertrains/drivetrains), as you modify, you mre than likely will need to tune the ECU/ECM/PCM to ensure the modifications are operating optimally. If you replaced the part according to what was coded on the reader, you may have to program/tune to make sure you are operating optimally. As far as the noise when you are steering even at a standstill, what kind of noise is it? If it is whining while under normal driving conditions, then it is a good indicator that the pump is starting to go or ti is low on fluid, but it will still continue to function for some time. If you check the reservoir, ensure you have adequate fluid and you can take a magnet inside to see if there are any metal deposits in the fluid. Other than that, I can't really offer any other advice on the issue of the noisy steering without further information. I will agree that your shock is shot from what you have described, but it is rather easy to change, however, I would change both at the same time so that you won't be repeating the process on the other side later on which would only lead you to be more frustrated when the other one goes. One other thing that you will have to remember is that all things mechanical will eventually wear down and break thus it is a constant process of break and repair. Whatever you do, I wouldn't give up just because of a little frustration.
|
|
|
#18 |
|
Enthusiast
Join Date: May 2006
Location: El Paso, Tx
Posts: 855
|
AMEN
__________________
"The gods too are fond of a joke." "If I had only known, I would have been a locksmith. " |
|
|
#19 | |
|
Regular
1968 302 Coupe
Join Date: Jul 2006
Location: Bel Air, MD
Posts: 421
|
|
|
|
|
#20 |
|
Regular
Join Date: Aug 2006
Posts: 66
|
With any car you need to just look at it as any mechanical machine shit breaks and needs to be repaired but the better you maintain it the less. I have to get a whole new wiring harness for my daily driver (not a mustang btw) and they dont make it but my wiring harness was butchered by the previous owner, he couldnt get the head light switch to stay in so he cut the harness and wired in two toggle switches that just hung under the dash board. and somehow he had the cruise control wire wired in with the headlight harness wiring so i dont have cruise control, i dont have a horn (has a aftermarket horn button under the dashboard to pass inspection) and the cornering lights that are supposed to come on to illuminate around turns when the parking light or head lights are on dosent work.
But after I repaired what I could things been fine, need brakes now including rotors since these are paper thin lol. And when i plan to rebuilt the engine Ill have to spend extra money if i havent replaced the wiring before then. |
![]() |
| Thread Tools | |
|
|
Threads Similar to: I give up... my car is falling apart
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Who would give me a hug?? | Onemanzu | The Clubhouse | 2 | October 1st, 2007 02:45 AM |
| how much hp with this give me? | blue03mach1 | 99-04 | 24 | September 2nd, 2007 03:26 AM |
| i give up | knightster420 | V6 Mustangs | 28 | August 22nd, 2007 11:40 PM |
| My Car Is Falling Apart | phisherize | 99-04 | 31 | November 18th, 2006 11:55 PM |
| About to give up! | cliff | Classic Mustangs | 13 | August 31st, 2006 10:20 PM |