[Nick_Rapitis]

is there any easy way to adjust these headlights...they are dual halo's

[Murderjetz]

weird...your car is none of those years =\

do you mean like they're just aiming too low or too high? aftermarket lights have a tendency to suck at aiming. if you're low beams are too low and your high beams are too high...you're pretty much fucked. as far as i know, there's nothing you can do about that...and yes, it sucks...

but if you want to move the entire headlight up or down or side to side, just pop off the plastic cover that's on top of them, and using a small ratchet or wrench, you can adjust the little bolts holding them in there, screwing the headlight in our out to ajust the way it sits in the frame, which in turn adjusts where its pointing at.

[Nick_Rapitis]

yeah, im doing my girlfriends headlights...that year is just a bitch to get in there to adjust

[Murderjetz]

yes....yes it is.
if you need to adjust by a pretty big amount, using a ratchet for it is just gonna take forever, since it moves it by very small increments and you have so little room to actually move your ratchet.
I would just pop them out and turn those black clip things by hand, get it approximately close much faster, and then fine tune with a ratchet. the bitch with that though is that those black "clips" that hold the lights in place break pretty easily when you put them back in...cus they're hard to get in right, so you have to push pretty hard, but push just a little too hard and BAM the whole thing snaps and you're fucked.
I don't know where you could get some extras from...