To Stroker or Not to Stroker? That is the Question!

87StangLX · October 19th, 2007, 06:42 PM

If i go stroker should i go 331 or 347? i found these 347 kits:

347RK2000 Pro-X Pistons: -3cc Flat Top/Inline $1195.95
347RK2002 Pro-X Pistons: -3cc Flat Top/Twisted Wedge $1215.95
347RK2004 Pro-X Pistons: -18cc Max Quench/Inline/Twisted Wedge $1255.95

and these 331 kits:

331RK1000 Pro Series Pistons: Flat Top/Inline/Twisted Wedge $999.95
331RK1001 Pro Series Pistons: -13cc Max Quench/Inline/Twisted Wedge $1039.95

or should i just go 306?

homebrewed · October 19th, 2007, 09:23 PM

How much RPM are you wantin' to spin?

IMO, 347

1slo5.0 · October 19th, 2007, 11:30 PM

347

TurboLX · October 19th, 2007, 11:31 PM

Originally Posted by Darrell

347

X2

BWAL · October 19th, 2007, 11:33 PM

my first choice would be 408 stroker, but my second choice would be a 347 stroker

homebrewed · October 19th, 2007, 11:34 PM

Yay!! I started a trend

Thats whats gonna be between the towers when my 306 finally splits in half

TurboLX · October 19th, 2007, 11:42 PM

Stroker Theory

tlr96 · October 19th, 2007, 11:47 PM

Originally Posted by TurboLX

Originally Posted by Darrell

347

X2

X3

1slo5.0 · October 19th, 2007, 11:57 PM

Originally Posted by TurboLX

Stroker Theory

That was great reading until I got to the part about rod to stroke ratios and increased oil consumption from the pin interesecting the oil ring grove. That kind of false information misleads so many people. Rod to stroke ratio means nothing. If it meant something the big block Chevys and other motors with horrible rod to stroke ratios would never have been around as long as they have been. The piston intersecting the oil ring has nothing to do with oil consumption. The oil control ring scrapes the cylinders. How does a piston pin intersecting the ring groove cause oil consumption? It doesn't.

TurboLX · October 20th, 2007, 12:01 AM

Maybe you should send them an email and tell them

i knew something wasnt right there, just couldnt figure it out

1slo5.0 · October 20th, 2007, 12:14 AM

Originally Posted by TurboLX

Maybe you should send them an email and tell them

i knew something wasnt right there, just couldnt figure it out

Some people actually believe that bullshit. Telling those fools wouldn't do anything. They are a website, they don't build engines. Guys that do this for a living will tell you rod to stroke ratios and wrist pins intersecting oil rings is nothing to worry about. Ask Woody what he thinks about this subject. Here are a couple articles from someone that does this for a living.

http://www.hardcore50.com/Articles/g...trokeRatio.htm

http://www.hardcore50.com/Articles/g...trokeChart.htm

TurboLX · October 20th, 2007, 12:18 AM

that was some interesting info there

87StangLX · October 20th, 2007, 11:39 AM

Originally Posted by homebrewed

How much RPM are you wantin' to spin?

IMO, 347

well if i do go with a stroker i'm probly gonna get a new tranny like a t-56 and maybe a KB 2.1L an hopefully spin up to like around 4 grand before shiftin to make sure i get into the powerband.

87StangLX · October 20th, 2007, 11:46 AM

that an since it seems that 347 is the way to go, which one of the kits should i choose out of the ones i first posted.

oh snap! i just realized that a stock block might not handle this much!!!

October 19th, 2007, 06:42 PM	#1
87StangLX Regular Join Date: Jul 2007 Posts: 201 iTrader: 0 reviews	To Stroker or Not to Stroker? That is the Question! If i go stroker should i go 331 or 347? i found these 347 kits: 347RK2000 Pro-X Pistons: -3cc Flat Top/Inline $1195.95 347RK2002 Pro-X Pistons: -3cc Flat Top/Twisted Wedge $1215.95 347RK2004 Pro-X Pistons: -18cc Max Quench/Inline/Twisted Wedge $1255.95 and these 331 kits: 331RK1000 Pro Series Pistons: Flat Top/Inline/Twisted Wedge $999.95 331RK1001 Pro Series Pistons: -13cc Max Quench/Inline/Twisted Wedge $1039.95 or should i just go 306?

October 19th, 2007, 11:30 PM	#3
1slo5.0 MM Ninjas! 1990 Mustang LX 9.36@143 mph Join Date: Jan 2006 Location: North Fond du Lac, Wisconsin Posts: 11,375 iTrader: 1 reviews	347 __________________ My daily driver has 16 cylinders and 4400hp @ 1000 rpm.... ***1988 Mustang GT - Stock....almost

October 19th, 2007, 11:42 PM	#7
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,792 Blog Entries: 1 iTrader: 0 reviews	Stroker Theory __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

October 20th, 2007, 12:01 AM	#10
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,792 Blog Entries: 1 iTrader: 0 reviews	Maybe you should send them an email and tell them i knew something wasnt right there, just couldnt figure it out __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

October 20th, 2007, 12:18 AM	#12
TurboLX I Post Entirely Way Too Much 1988 Mustang LX Turbo Join Date: Oct 2006 Location: NY Posts: 8,792 Blog Entries: 1 iTrader: 0 reviews	that was some interesting info there __________________ 1988 LX Coupe 2.5L, GT35R, 44mm WG, 32psi, C16.

October 20th, 2007, 11:46 AM	#14
87StangLX Regular Join Date: Jul 2007 Posts: 201 iTrader: 0 reviews	that an since it seems that 347 is the way to go, which one of the kits should i choose out of the ones i first posted. oh snap! i just realized that a stock block might not handle this much!!!

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: To Stroker or Not to Stroker? That is the Question!
Thread	Thread Starter	Forum	Replies	Last Post
4.6L Stroker kit	energiesource	99-04	9	November 1st, 2007 02:22 AM
XFI Stroker Cam	Euroeater95	94-95	2	August 27th, 2007 01:19 PM
Simple Stroker Question.	JSapit	V6 Mustangs	15	May 13th, 2007 10:52 PM
408 stroker	Clockman	94-95	7	April 25th, 2007 06:48 PM
Stroker question/rough starting	65 B/FX	Classic Mustangs	13	March 27th, 2007 01:50 AM

All times are GMT -4. The time now is 10:11 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.