Modded Mustang Forums banner

CAMS PROBLEM!!!!

6K views 2 replies 3 participants last post by  Derfdog15 
#1 ·
Hello every one..Good Sunday to ya....Not to me thou ....Let me ask...I have a 03gt....SOHC 2v 4.6 ...And I bought some cams from a guy who had a 99 saleen SOHC 2V 4.6...but when I put the cams in the Lifters want stay in it's like the lobes are smaller...is there a different head on the 2 mustang?

---------- Post added at 11:34 AM ---------- Previous post was at 10:58 AM ----------

99 - mid year 01 had Windsor PI heads.
Mid year 01 - 04 had Romeo PI heads.
Is my problem
 
#3 ·
were they stock spec or custom grind cams, if they were custom grind you may need new lifters or valve springs or something of that sort.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top