nitrous pressure?

ricerraper33 · April 26th, 2008, 02:03 PM

well i got back from the track last night and my bottle pressure is at 600 so i bassically cant spray anymore? because i heard its not good to spay less than 900? dunno if thats true or not?

pa.ulB · April 26th, 2008, 06:52 PM

yes, it is true.. do you have a bottle heater??

rk_2000_Z/28 · April 30th, 2008, 04:53 PM

Spraying below 900 isn't bad, but I wouldn't go very much further. 800 would be the all time lowest I would possibly think about spraying. 600 is way too low.

Stangzilla · June 18th, 2008, 11:59 PM

if he does spray its not gonna hurt. the car is gonna be running rich and he just wont get the full shot.. wont hurt though especially if he has a wet kit..

AggieStang · June 25th, 2008, 12:06 AM

So basically 3/4 of the bottle is wasted?

SWEET2KSTANG · June 25th, 2008, 12:15 AM

if the pressure is low and its a wet kit, you run into a chance of fuel puddling.

99mustanggtman · June 25th, 2008, 12:40 AM

keep it above 1000

SWEET2KSTANG · June 25th, 2008, 12:44 AM

above 900 is ideal, most companies are set up for 950. too low of pressure will be rich and not ideal, too much will be a little lean and can cause some issues as well.

AggieStang · June 25th, 2008, 10:53 PM

How can you keep it up that high? I have a bottle heater but it doesn't help that much and I don't want to buy that nano nitrous assist deal.

Stangzilla · June 25th, 2008, 11:23 PM

Originally Posted by Hillsbaseball08

How can you keep it up that high? I have a bottle heater but it doesn't help that much and I don't want to buy that nano nitrous assist deal.

Well you have a shitty bottle heater. Mine heats up the bottle to 1100psi in like 10-15 minutes. My bottle heater has a pressure switch on it. When my bottle goes below 900 psi it turns on and it turns off at 1100psi.

AggieStang · June 25th, 2008, 11:33 PM

It's nitrous express. I guess it's just fucked up. Ill check it.

Port73 · June 25th, 2008, 11:37 PM

I have a zex wet kit for about 6 mnths and latelly i fill up the bottle get just 1 or two shots 75hps and the nitrous start comming a little disapearing and then i have it again. i went back to the fill up place to ask about it cause i had pressure and everything, but still my nitrous flow kept failing. He told me i should clean up my bottle and take out the little pipe that is inside of it.
Any suggestions?

Stangzilla · June 26th, 2008, 10:15 AM

Originally Posted by Port73

I have a zex wet kit for about 6 mnths and latelly i fill up the bottle get just 1 or two shots 75hps and the nitrous start comming a little disapearing and then i have it again. i went back to the fill up place to ask about it cause i had pressure and everything, but still my nitrous flow kept failing. He told me i should clean up my bottle and take out the little pipe that is inside of it.
Any suggestions?

Well there is a chance that you are getting bad fills. That tube is huge its not gonna get clogged.

Stangzilla · June 26th, 2008, 10:18 AM

Originally Posted by Hillsbaseball08

It's nitrous express. I guess it's just fucked up. Ill check it.

This is the best bottle heater out there. it runs on AC & DC power and uses a pressure transducer. I have one and I love it!!

Archeat: Nitrous Bottle Heaters

SWEET2KSTANG · June 27th, 2008, 11:54 PM

make sure you have all fittings and wires good, i would also check to see if you might have a kink in any part of the nitrous line. i had an issue of my nitrous kicking in and out, i ended up having a small kink. i replaced it and havent had issues with it since. the best heaters will be pressure controlled, the temp controlled ones are ok but not the best.

04gtmustang · June 29th, 2008, 06:41 PM

get you a bottle heater. I am running the dynotune nitrous heater and its very good its not a thermostat heater it monitors pressure and i have mine set at 1150 and it holds 1150 as soon as it drops below the heater kicks on and can get to 200 degrees. works very well.

April 26th, 2008, 02:03 PM	#1
ricerraper33 Enthusiast Join Date: Aug 2007 Location: Naples Florida Posts: 877 iTrader: 2 reviews	nitrous pressure? well i got back from the track last night and my bottle pressure is at 600 so i bassically cant spray anymore? because i heard its not good to spay less than 900? dunno if thats true or not? __________________ full exhaust custom H pipe,cai, t-spacer, ud pulleys, 75 wet shot of nitrous, mach 1 rims, Xcal 2 custom tuned nitrous 87 93 octane VMP 9.1@80.07in the 1/8th mile.. thats the slow car! 2006 honda cbr 600rr for the fastness!

April 26th, 2008, 06:52 PM	#2
pa.ulB Regular 2004 GT slow.... Join Date: Nov 2006 Location: PA Posts: 415 iTrader: 0 reviews	yes, it is true.. do you have a bottle heater?? __________________ 2004 Crimson red GT saleen s/c, full bolt ons

April 30th, 2008, 04:53 PM	#3
rk_2000_Z/28 Forever in our hearts travis_afx 2003 SVT Cobra Join Date: Apr 2007 Location: Enid, OK Posts: 4,312 iTrader: 0 reviews	Spraying below 900 isn't bad, but I wouldn't go very much further. 800 would be the all time lowest I would possibly think about spraying. 600 is way too low. __________________ 03 Cobra-Slow 02 SS, 00 Z/28-Gone Rest In Peace Travis Billings

June 18th, 2008, 11:59 PM	#4
Stangzilla MM Fanatic Join Date: Aug 2006 Location: On my way to Baines's house!! Posts: 3,298 iTrader: 0 reviews	if he does spray its not gonna hurt. the car is gonna be running rich and he just wont get the full shot.. wont hurt though especially if he has a wet kit.. __________________ Rotating The Earth 1320 Feet At A Time!! Today, I found out that when I masturbate at night while watching internet porn I cast a huge shadow on the curtain and the entire street is able to see it.

June 25th, 2008, 12:06 AM	#5
AggieStang WHOOP! 2002 Mustang GT 7.44@95 (1/8) Join Date: Oct 2007 Location: TEXAS Posts: 3,115 iTrader: 3 reviews	So basically 3/4 of the bottle is wasted? __________________ Buy my: Nitrous Accessories Diablosport Programmer In The Classifieds

June 25th, 2008, 12:15 AM	#6
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	if the pressure is low and its a wet kit, you run into a chance of fuel puddling. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

June 25th, 2008, 12:40 AM	#7
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	keep it above 1000 __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

June 25th, 2008, 12:44 AM	#8
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	above 900 is ideal, most companies are set up for 950. too low of pressure will be rich and not ideal, too much will be a little lean and can cause some issues as well. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

June 25th, 2008, 10:53 PM	#9
AggieStang WHOOP! 2002 Mustang GT 7.44@95 (1/8) Join Date: Oct 2007 Location: TEXAS Posts: 3,115 iTrader: 3 reviews	How can you keep it up that high? I have a bottle heater but it doesn't help that much and I don't want to buy that nano nitrous assist deal. __________________ Buy my: Nitrous Accessories Diablosport Programmer In The Classifieds

June 25th, 2008, 11:33 PM	#11
AggieStang WHOOP! 2002 Mustang GT 7.44@95 (1/8) Join Date: Oct 2007 Location: TEXAS Posts: 3,115 iTrader: 3 reviews	It's nitrous express. I guess it's just fucked up. Ill check it. __________________ Buy my: Nitrous Accessories Diablosport Programmer In The Classifieds

June 25th, 2008, 11:37 PM	#12
Port73 Newbie Join Date: Aug 2007 Location: Tampa - FL Posts: 8 Blog Entries: 1 iTrader: 0 reviews	I have a zex wet kit for about 6 mnths and latelly i fill up the bottle get just 1 or two shots 75hps and the nitrous start comming a little disapearing and then i have it again. i went back to the fill up place to ask about it cause i had pressure and everything, but still my nitrous flow kept failing. He told me i should clean up my bottle and take out the little pipe that is inside of it. Any suggestions?

June 27th, 2008, 11:54 PM	#15
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,542 iTrader: 8 reviews	make sure you have all fittings and wires good, i would also check to see if you might have a kink in any part of the nitrous line. i had an issue of my nitrous kicking in and out, i ended up having a small kink. i replaced it and havent had issues with it since. the best heaters will be pressure controlled, the temp controlled ones are ok but not the best. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

June 29th, 2008, 06:41 PM	#16
04gtmustang Look Ma! My First Post! 2004 GT mustang Join Date: Jun 2008 Location: stafford, va Posts: 1 iTrader: 0 reviews	get you a bottle heater. I am running the dynotune nitrous heater and its very good its not a thermostat heater it monitors pressure and i have mine set at 1150 and it holds 1150 as soon as it drops below the heater kicks on and can get to 200 degrees. works very well. __________________ 2004 gt mustang 1. 3.73 gears 2. borla stingers 3. slp x 4. sniper tuner 5. accufab tb and plenum 6. nitrous currently removed awaiting boost best 1/8th 7.8 at 94

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: nitrous pressure?
Thread	Thread Starter	Forum	Replies	Last Post
nitrous pressure question?	bjesse60	99-04	7	December 28th, 2007 01:27 PM
Nitrous/ Fuel Pressure???	acmillr	99-04	42	January 21st, 2007 02:04 PM

All times are GMT -4. The time now is 11:53 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.