Anyone near SE Wisconsin willing to help..?

OptionalStang · June 6th, 2011, 11:54 AM

i have the PI heads and cams that were never dissasembled sitting in my closet waiting to be installed on my 1997 npi cougar, i also already have the PI manifold on the car, both the PI heads and my NPI heads are 11 bolt so all i need would be the know how and a few tools i dont have and some help to get them on, i can add some cash for your time and would help you whenever you need the help, I live in OakCreek WI and i wanna get these on asap.I dont care if we do it in my parkinglot or at your house,it also doesnt need to be done over night and i can have half the engine torn down by the time you get here.PLEASE HELP,im soooooo anxious. Anyone on here from the area that could help..?

zinc-vert02 · June 6th, 2011, 12:23 PM

go join chicago mustang club forum, there are TONS of people on there in our area that would be willing to help.

i would but i have never torn very far into a Mod Motor

G.T. Rags · June 7th, 2011, 12:09 AM

I moved this into the regional section.

Might have better luck here

OptionalStang · June 7th, 2011, 12:23 AM

thank you G.T, and sorry about that

OptionalStang · June 7th, 2011, 10:58 AM

i jumped on that chitown site and didnt receive the best of welcomes,so i just ditched..and bcm is a joke...this seems to be the best place for me

zinc-vert02 · June 7th, 2011, 11:25 AM

you sure you went on the right site?

every one on CMC is very nice and welcoming

OptionalStang · June 7th, 2011, 09:33 PM

yes sir...people on these sites seem not to like me becuase my spelling isnt the best.At BCM, i got into it with a few people and it got personal..

justin503 · June 12th, 2011, 09:19 AM

I would help but I just know the basics. I can do superchargers, exaughst and stuff like that. There a place in Milwaukee off of 45 and Silverspring called the Hands on Garage. They have special tools and bays to work in along with profecinals to help you with every thing. Hope this helps. It's probably about a 30 min drive from Oak Creak.

OptionalStang · June 13th, 2011, 08:53 AM

i have seen that place and wondered about it...any idea on the rates? ille look into it..the PI head swap is pretty basic i just dont know how to do the timing chain mainly, but the rest of the stuff is pretty much just removing bolts and getting down and dirty..

June 6th, 2011, 11:54 AM	#1
OptionalStang Banned 1997 cougar 4.6 1/2PI TooFast4theFUZZ Join Date: May 2011 Location: se wi Posts: 991 iTrader: 1 reviews	Anyone near SE Wisconsin willing to help..? i have the PI heads and cams that were never dissasembled sitting in my closet waiting to be installed on my 1997 npi cougar, i also already have the PI manifold on the car, both the PI heads and my NPI heads are 11 bolt so all i need would be the know how and a few tools i dont have and some help to get them on, i can add some cash for your time and would help you whenever you need the help, I live in OakCreek WI and i wanna get these on asap.I dont care if we do it in my parkinglot or at your house,it also doesnt need to be done over night and i can have half the engine torn down by the time you get here.PLEASE HELP,im soooooo anxious. Anyone on here from the area that could help..? Last edited by OptionalStang; June 6th, 2011 at 12:13 PM.

June 6th, 2011, 12:23 PM	#2
zinc-vert02 Bringing Yellow Back 2002 mustang gt 12.2 at 117 Join Date: Apr 2010 Location: WISCONSIN Posts: 9,967 iTrader: 1 reviews	go join chicago mustang club forum, there are TONS of people on there in our area that would be willing to help. i would but i have never torn very far into a Mod Motor __________________ SOON TO BE 5.4 3V POWERD WITH A ROUSH CHARGER HELPING IT BAMA Performance Drag Team Member #4

June 7th, 2011, 11:25 AM	#6
zinc-vert02 Bringing Yellow Back 2002 mustang gt 12.2 at 117 Join Date: Apr 2010 Location: WISCONSIN Posts: 9,967 iTrader: 1 reviews	you sure you went on the right site? every one on CMC is very nice and welcoming __________________ SOON TO BE 5.4 3V POWERD WITH A ROUSH CHARGER HELPING IT BAMA Performance Drag Team Member #4

Threads Similar to: Anyone near SE Wisconsin willing to help..?
Thread	Thread Starter	Forum	Replies	Last Post
wisconsin!!!!!	zinc-vert02	Midwest	206	April 11th, 2012 05:12 PM
Wisconsin Emissions?	05roush0090	2005 - 2010	16	May 4th, 2011 10:02 PM
Hey from wisconsin!	Bfey	New Members Introductions	22	January 3rd, 2011 08:14 PM
new kid from Wisconsin	DavidESchiller	New Members Introductions	12	November 12th, 2010 01:17 AM
New guy from Wisconsin!!!	D-Town 2V	New Members Introductions	34	February 24th, 2009 12:27 AM

June 7th, 2011, 12:23 AM	#4
OptionalStang Banned 1997 cougar 4.6 1/2PI TooFast4theFUZZ Join Date: May 2011 Location: se wi Posts: 991 iTrader: 1 reviews	thank you G.T, and sorry about that

June 7th, 2011, 10:58 AM	#5
OptionalStang Banned 1997 cougar 4.6 1/2PI TooFast4theFUZZ Join Date: May 2011 Location: se wi Posts: 991 iTrader: 1 reviews	i jumped on that chitown site and didnt receive the best of welcomes,so i just ditched..and bcm is a joke...this seems to be the best place for me

June 7th, 2011, 09:33 PM	#7
OptionalStang Banned 1997 cougar 4.6 1/2PI TooFast4theFUZZ Join Date: May 2011 Location: se wi Posts: 991 iTrader: 1 reviews	yes sir...people on these sites seem not to like me becuase my spelling isnt the best.At BCM, i got into it with a few people and it got personal..

June 12th, 2011, 09:19 AM	#8
justin503 Regular 2007 CS/GT W/Roush 2.57 Join Date: Mar 2011 Location: Brown Deer, WI Posts: 152 iTrader: 0 reviews	I would help but I just know the basics. I can do superchargers, exaughst and stuff like that. There a place in Milwaukee off of 45 and Silverspring called the Hands on Garage. They have special tools and bays to work in along with profecinals to help you with every thing. Hope this helps. It's probably about a 30 min drive from Oak Creak.

June 13th, 2011, 08:53 AM	#9
OptionalStang Banned 1997 cougar 4.6 1/2PI TooFast4theFUZZ Join Date: May 2011 Location: se wi Posts: 991 iTrader: 1 reviews	i have seen that place and wondered about it...any idea on the rates? ille look into it..the PI head swap is pretty basic i just dont know how to do the timing chain mainly, but the rest of the stuff is pretty much just removing bolts and getting down and dirty..

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 02:11 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.