Suggested Spark Plugs for 98 Cobra

ReverendDexter · January 19th, 2007, 02:14 PM

Did a quick search, didn't see anything specific to my question so I apologize if this has already been posted.

Anywho, looking to get fresh plugs/wires in the Cobra ('98, engine is bone stock) , I was wondering if anyone had any suggestions or experiences for or against any paticular brands/types?

I'm currently looking at sparkplugs.com, and considering going with NGK sinlge platinum plugs and NGK wires. Is there any reason why I'd want to spend the 11 bucks/plug to get the double plats?

Thanks for the info!

-Dex

Casper98GT · January 21st, 2007, 02:27 PM

If its bone stock dont waste youre money on expensive plugs. Do a NGK or Denso platinum like you said. that will be fine. As for wires i would like to suggest www.performancedistributors.com. I bought the kit a while back came with 10mm Live wires, (2) Screaming Demon coil packs and chrome wire looms. I netted .2 in the 1/4 from it. So thats the only reason i suggest them to people. Easy install and i have never had a problem going on 3 years. Good luck

Thewolfman456 · January 21st, 2007, 04:41 PM

When I still had my 1999 Cobra (it has the same engine as your '98) I used Denso Platinum and they worked like a charm. I suggest those.

Casper98GT · January 21st, 2007, 09:20 PM

Almost the same motor, they actually changed over from 98 to 99 with different set-up. But still a DOHC

ReverendDexter · January 22nd, 2007, 12:31 AM

Yeah, didn't they go from the B port to the C port in '99? I've also heard those have some cooling issues with one of the heads.

I ended up going with basically what I had put above, NGK single plat plugs, Denso wires, and grabbed a K&N FIPK (the conical with the heat shield, not the one with the whole intake pipe). Total cost was just shy of $300 shipped with tax.

Anything else I should be taking care of for the magic 70K tune-up?

And thanks for the responses!

Thewolfman456 · January 22nd, 2007, 11:38 AM

Yeah, I forgot about the ports. Cooling problems with the heads? I wish that was the only thing that had cooling problems. I had to replace the radator with an aftermarket, lets just say that was a month and a half of hell.

Casper98GT · January 22nd, 2007, 05:50 PM

wolfman do you have a 96?

January 19th, 2007, 02:14 PM	#1
ReverendDexter Hardcore Enthusiast 1998 SVT Cobra Join Date: Jan 2007 Location: Santa Rosa, CA Posts: 1,368	Suggested Spark Plugs for 98 Cobra Did a quick search, didn't see anything specific to my question so I apologize if this has already been posted. Anywho, looking to get fresh plugs/wires in the Cobra ('98, engine is bone stock) , I was wondering if anyone had any suggestions or experiences for or against any paticular brands/types? I'm currently looking at sparkplugs.com, and considering going with NGK sinlge platinum plugs and NGK wires. Is there any reason why I'd want to spend the 11 bucks/plug to get the double plats? Thanks for the info! -Dex __________________ ---------------------------------------------------------- The Sacred Chao says "MU" '96 Bronco XLT '98 Cobra '89 Camry AllTrac

January 22nd, 2007, 12:31 AM	#5
ReverendDexter Hardcore Enthusiast 1998 SVT Cobra Join Date: Jan 2007 Location: Santa Rosa, CA Posts: 1,368	Yeah, didn't they go from the B port to the C port in '99? I've also heard those have some cooling issues with one of the heads. I ended up going with basically what I had put above, NGK single plat plugs, Denso wires, and grabbed a K&N FIPK (the conical with the heat shield, not the one with the whole intake pipe). Total cost was just shy of $300 shipped with tax. Anything else I should be taking care of for the magic 70K tune-up? And thanks for the responses! __________________ ---------------------------------------------------------- The Sacred Chao says "MU" '96 Bronco XLT '98 Cobra '89 Camry AllTrac

Threads Similar to: Suggested Spark Plugs for 98 Cobra
Thread	Thread Starter	Forum	Replies	Last Post
spark plugs	drivewith2feet	V6 Mustangs	27	September 7th, 2007 06:44 PM
Spark Plugs	Modern_Muscle	2005+	6	May 30th, 2007 07:03 AM
spark plugs	Grimmy	Classic Mustangs	10	February 14th, 2007 10:20 AM
spark plugs?	rednsilver91	V6 Mustangs	24	January 22nd, 2007 10:35 PM
spark plugs	bcp5008	V6 Mustangs	8	December 20th, 2006 08:14 PM

January 21st, 2007, 04:41 PM	#3
Thewolfman456 Regular Join Date: Jan 2007 Location: Raleigh, NC Posts: 482	When I still had my 1999 Cobra (it has the same engine as your '98) I used Denso Platinum and they worked like a charm. I suggest those.

January 22nd, 2007, 11:38 AM	#6
Thewolfman456 Regular Join Date: Jan 2007 Location: Raleigh, NC Posts: 482	Yeah, I forgot about the ports. Cooling problems with the heads? I wish that was the only thing that had cooling problems. I had to replace the radator with an aftermarket, lets just say that was a month and a half of hell.

All times are GMT -4. The time now is 11:42 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.