Any thoughts on Solid Lash Adjusters?

RayzerFish · June 6th, 2009, 09:18 AM

Still building. Wondering if it would be worth the $350 to put the solid lash adjusters in while I have everything still in pieces. From what I'm reading it will allow me to get more r's & a little more hp. I'd like to hear your opinions though.

Here's my setup so far:
2001 Romeo block bore +.020 std stroke & rod lenght
forged H rods & pistons (4cc) w/reliefs & stainless rings for NOS
Comp ratio of 11.07:1
Patriot Stage III Winsor heads (looks to be stock springs & rockers)
Comp 270 xtreme energy Cams
ProPower Typhoon Intake PP - 75mm TB & plenum PP - 30# Bosch Injectors
Electric water pump - SLP Long tube ceramic headers - SLP shorty cat'd X-pipe
Flow Masters - CAI - SCT X-Cal 2
Also just finished swapping out the slosh box and put in a T-45

BTW: I'm looking for a ECU & harness for the T-45 if anyone has one for a SN95

SWEET2KSTANG · June 6th, 2009, 10:07 PM

no need to go to the solids. the hydrolic adjusters are just fine, plenty capable to turn high rpm's.

June 6th, 2009, 09:18 AM	#1
RayzerFish Newbie 1996 GT w/new Powerplant Join Date: Jul 2008 Location: Daytona Beach area Florida Posts: 41 iTrader: 0 reviews	Any thoughts on Solid Lash Adjusters? Still building. Wondering if it would be worth the $350 to put the solid lash adjusters in while I have everything still in pieces. From what I'm reading it will allow me to get more r's & a little more hp. I'd like to hear your opinions though. Here's my setup so far: 2001 Romeo block bore +.020 std stroke & rod lenght forged H rods & pistons (4cc) w/reliefs & stainless rings for NOS Comp ratio of 11.07:1 Patriot Stage III Winsor heads (looks to be stock springs & rockers) Comp 270 xtreme energy Cams ProPower Typhoon Intake PP - 75mm TB & plenum PP - 30# Bosch Injectors Electric water pump - SLP Long tube ceramic headers - SLP shorty cat'd X-pipe Flow Masters - CAI - SCT X-Cal 2 Also just finished swapping out the slosh box and put in a T-45 BTW: I'm looking for a ECU & harness for the T-45 if anyone has one for a SN95

June 6th, 2009, 10:07 PM	#2
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	no need to go to the solids. the hydrolic adjusters are just fine, plenty capable to turn high rpm's. __________________ project warhorse under construction being built by MP2 Performance

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/modular-mustangs/126021-any-thoughts-solid-lash-adjusters.html
Posted By	For	Type	Date
Thread Any opinions on solid lash adjusters? \| Corral Forums \| BoardReader	This thread	Refback	August 24th, 2010 10:50 PM

Threads Similar to: Any thoughts on Solid Lash Adjusters?
Thread	Thread Starter	Forum	Replies	Last Post
Lifters/lash adjusters	texas96gt	99-04	4	December 12th, 2008 11:13 PM
NPI lash adjusters and followers on PI head	texas96gt	96-98	6	December 12th, 2008 11:07 PM
Valve lash Adjusters	interfac9	99-04	31	September 18th, 2008 06:59 PM
Solid lash adjusters	zerofx150	99-04	8	March 16th, 2008 10:59 PM

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 08:54 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.