a lil help plz

brotch · January 28th, 2007, 03:40 PM

i have a 98 gt and whenever i turn sharp it seems to make kind of a clunking/skreaching/squeaky noise like obviously something isnt rite, has anybody had this problem be4 or any idea what it could be?

Barrier · January 28th, 2007, 06:35 PM

Something with the front suspension. Most likely a wheel bearing but could also be a ball joint or tie rod.

Casper98GT · January 29th, 2007, 03:24 PM

tie rod ends and balljoints on these cars can make that noise.

starman1950 · January 31st, 2007, 04:54 PM

tie rod ends and balljoints on these cars can make that noise

There are bushings on the tie rod ends too, check them 1st then proceed.....

Casper98GT · February 1st, 2007, 12:22 AM

There are bushings on the tie rod ends too, check them 1st then proceed.....

Care to explain this one? How does a tie rod end have a bushing on it? A tie rod end is the end of the steering rack. Its made up of a steel threaded internally rod with a ball and socket end with a boot over it protecting the grease.

starman1950 · February 1st, 2007, 01:22 AM

sorry not the ends..........my bad

jagstang96 · February 2nd, 2007, 03:05 PM

I had that problem before and the first thing to check is the shock mount towers , open your hood and look at the mount c if u can tighten up the 3 nuts on the tower this was causing my problem they got loose and the shocks were not stable so when u turn it would create that crunk good luck.

January 28th, 2007, 03:40 PM	#1
brotch Newbie Join Date: Jul 2006 Posts: 25	a lil help plz i have a 98 gt and whenever i turn sharp it seems to make kind of a clunking/skreaching/squeaky noise like obviously something isnt rite, has anybody had this problem be4 or any idea what it could be?

January 28th, 2007, 06:35 PM	#2
Barrier Regular Join Date: Dec 2006 Posts: 60	Something with the front suspension. Most likely a wheel bearing but could also be a ball joint or tie rod. __________________ 99 Dark Green Satin Mustang GT conv K&N CAI; MAC O/R H-Pipe; Flowmaster 40s; FRPP 13lb flywheel; Motive 3.90s; Diablosport tuner; Eibach Prokit springs; Tokico Dspec shocks/struts 13.805 @ 100.23, 1.97 60'

February 1st, 2007, 01:22 AM	#6
starman1950 Regular Join Date: Nov 2006 Location: Easton, PA Posts: 52	sorry not the ends..........my bad __________________ God I love my GT !!!

February 2nd, 2007, 03:05 PM	#7
jagstang96 Regular Join Date: Aug 2006 Posts: 167	I had that problem before and the first thing to check is the shock mount towers , open your hood and look at the mount c if u can tighten up the 3 nuts on the tower this was causing my problem they got loose and the shocks were not stable so when u turn it would create that crunk good luck.

All times are GMT -4. The time now is 06:53 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.