new exhuast video!

Mineral Gray GT · March 6th, 2011, 04:59 PM

I just installed my UPR (pypes) Off road X pipe to complement my flowmaster 40s. I know some people hate the sound of flows but I still welcome comments. It's not the longest video but it'll do until i can get the camcorder out and video me driving it. Also, I'm looking for advice on wheels. I'd like to stay 17" because I just bought new tires. I'm thinking black FR500's with polished lip? what do you think?

YouTube - 2002 mustang GT o/r X pipe Flowmaster 40

1fasts/c2003 · March 6th, 2011, 05:36 PM

sounds beautiful dude and the stang looks clean. wheels choice is fine too.

Mineral Gray GT · March 6th, 2011, 05:56 PM

Thanks for the compliment! as soon as i recoup another $500, i'll throw on some FR500s

flatblack94 · March 6th, 2011, 06:00 PM

Sounds great man and should look good with the fr500s

Vind03gt · March 11th, 2011, 05:01 PM

Sounds great. Did you have fitment issues with the pypes x pipe? Ive seen a lot of people complaining about the H and X pipes from pypes. I really like the way these sound and the price is very nice as well.

Mineral Gray GT · March 11th, 2011, 05:42 PM

Originally Posted by Vind03gt

Sounds great. Did you have fitment issues with the pypes x pipe? Ive seen a lot of people complaining about the H and X pipes from pypes. I really like the way these sound and the price is very nice as well.

surprisingly, no. I didnt. I bought the pipe knowing it probably wouldn't fit. But it bolted right up. Took less than 15 minutes (used a lift and air tools) However I didn't use the little cone piece they provide as i'm not sure where it goes. But i dont have any leaks so no worries. This may not be the truth, but my theory behind the whole pypes rant is that I ordered mine from UPR and it was listed as a UPR X pipe. So my thinking is that UPR has Pypes bend their pipes exclusively for them. While other companies get the pipe that Pypes bends using their specifications. Maybe right, maybe not. It's just my $ .02

Vind03gt · March 11th, 2011, 07:50 PM

Originally Posted by Mineral Gray GT

surprisingly, no. I didnt. I bought the pipe knowing it probably wouldn't fit. But it bolted right up. Took less than 15 minutes (used a lift and air tools) However I didn't use the little cone piece they provide as i'm not sure where it goes. But i dont have any leaks so no worries. This may not be the truth, but my theory behind the whole pypes rant is that I ordered mine from UPR and it was listed as a UPR X pipe. So my thinking is that UPR has Pypes bend their pipes exclusively for them. While other companies get the pipe that Pypes bends using their specifications. Maybe right, maybe not. It's just my $ .02

Thanks for the info. I think I'm going to buy my x pipe from Upr and hope for the best. The Pypes x pipe really sounds the best, which is surprising with such a low price tag.

I think your Mustang looks good the way it is. Keep the wheels you have.

Mineral Gray GT · March 11th, 2011, 11:14 PM

Originally Posted by Vind03gt

Thanks for the info. I think I'm going to buy my x pipe from Upr and hope for the best. The Pypes x pipe really sounds the best, which is surprising with such a low price tag.

I think your Mustang looks good the way it is. Keep the wheels you have.

I would go for it. If you run into any snags, carry it to a muffler shop and they can put it on for around $40. And thanks for the compliment!

97S281 · March 12th, 2011, 08:40 AM

Sounds great man.

March 6th, 2011, 05:36 PM	#2
1fasts/c2003 Regular Join Date: Oct 2007 Posts: 100 iTrader: 0 reviews	sounds beautiful dude and the stang looks clean. wheels choice is fine too. __________________ 1996 gt ported prototype stage 1 npi heads,stage 2 bullet racing cams, bbk lts, bbk x-pipe, magnaflow catback,professional product throttle body, cai, aluminum driveshaft, 3.90 gears, upper and lower control arms. v-3 vortech s/c 416rwhp/426rwtq

March 6th, 2011, 05:56 PM	#3
Mineral Gray GT Regular 2002 Mustang GT Join Date: Nov 2010 Location: Easley, SC Posts: 213 iTrader: 0 reviews	Thanks for the compliment! as soon as i recoup another $500, i'll throw on some FR500s __________________ 2002 Mustang GT- built C head 4V swap in progress FOBRA CLUB MEMBER #7

March 6th, 2011, 06:00 PM	#4
flatblack94 Hardcore Enthusiast 1987 lx T-Top N/A Join Date: Feb 2011 Location: salisbury,ma Posts: 1,149 iTrader: 0 reviews	Sounds great man and should look good with the fr500s __________________ 87' T-Top lx...all stock

March 11th, 2011, 05:01 PM	#5
Vind03gt Newbie Join Date: Dec 2010 Posts: 32 iTrader: 0 reviews	Sounds great. Did you have fitment issues with the pypes x pipe? Ive seen a lot of people complaining about the H and X pipes from pypes. I really like the way these sound and the price is very nice as well. __________________ [2003 Mustang GT Convertible/ 2009 Mustang GT] 2009 GT mods: Pypes x pipe, Flowmaster axle back, Sequential tails, 3.73 gears

March 12th, 2011, 08:40 AM	#9
97S281 Rollin' 18/ pushin' 2 1997 Saleen S281 Join Date: Feb 2007 Location: The lost highway Posts: 6,673 iTrader: 13 reviews	Sounds great man. __________________ MODS IN GARAGE NCMM ORIGINAL BLOWN 96-98 CREW MEMBER # 1

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: new exhuast video!
Thread	Thread Starter	Forum	Replies	Last Post
Doing the exhuast on the 5.0	Speedstang302	General Tech	6	January 10th, 2008 03:21 AM
mean exhuast	94stallion	V6 Mustangs	28	May 7th, 2007 10:52 PM
Exhuast help...	00RoushV6	General Tech	9	March 8th, 2007 02:43 PM
06 Exhuast. HELP	Ware	V6 Mustangs	17	February 8th, 2007 04:55 PM

All times are GMT -4. The time now is 04:18 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.