coil packs

ricks01 · September 10th, 2007, 03:02 PM

Have you guys upgraded your coil packs on the 4.6 motor. The ones for sale at American Muscle say 15hp on n/a motors. I was curious as to weather or not they're worth the money.

Drgnracin72 · September 10th, 2007, 06:55 PM

do not buy the gms ones, they work well for awhile but start making cars run like ass. if you must replace them, go with msd

02StangGToWNEr · September 10th, 2007, 07:41 PM

Originally Posted by drgnracin72

do not buy the gms ones, they work well for awhile but start making cars run like ass. if you must replace them, go with msd

+1

Or see if Mallory made any for our cars, because theirs were great on alot of older muscle cars.

TheBusher · September 10th, 2007, 07:54 PM

Will these actually give the HP gains they say they do???

G.T. Rags · September 11th, 2007, 01:58 AM

what about the screamin demon one's?

02StangGToWNEr · September 11th, 2007, 12:19 PM

Originally Posted by TheBusher

Will these actually give the HP gains they say they do???

I'm not sure about the whole HP thing, but I kinda doubt it.

02StangGToWNEr · September 11th, 2007, 12:20 PM

Originally Posted by 96GTRagTop

what about the screamin demon one's?

I never heard of them.

Any links???

NOSXR · July 6th, 2008, 12:54 AM

Hi there, I need to know if theres coil makers in the US that would make High output coils for the Australian XR6 Turbo engine.

With the new XR6 turbo / F6 now the most powerfull Aussie built car to date, (dyno testing has shown this) we are in need of High output coils for the Aussie market.

The strap length need for the Stainless conector is 80mm or 3.15 inches and the factory coil to be replaced is the Visteon F7TU-12A366BA.

Theres a massive market here for this product as tuning these vehicles normally nets you over a 80 Hp gain with no other mods.

Theres been 8 years of this engine here and theres another 2 years on the way before production is stopped. So the market is there to be had.

The big Aussie V8 is now a yesterday car as more and more people look to the F6 310KW 560Nm monsters (true output is more like 340kw, but Ford Australia are still trying to sell the Boss V8 here and you can't have little brother shadowing the V8)

Any way please help, Australian XR6 Turbo owners with this product.

I have a 800Hp XR6 Turbo and spark is a real issue.

NOSXR

SWEET2KSTANG · July 6th, 2008, 07:09 AM

i have no issues with my gms coils, nothing wrong with them. if there is to ba any issues gms will back them up and fix the issue. they are nice and help on idle and top end, especially with a power adder. there is no 15hp to gain with any coil replacement. if there is nothing wrong with yours, then dont worry about it. if you are just set on another set get the msd or gms.

01GT4.6 · July 7th, 2008, 12:50 AM

Originally Posted by 02StangGToWNEr

I'm not sure about the whole HP thing, but I kinda doubt it.

I agree that's why I went with a set (8) stockers (new on ebay) for $85. If I would have thought that MSD or any other aftermarket ones would produce 15hp I would have jumped on them.

'97'Cobra · July 10th, 2008, 05:32 AM

ya your not gonna notice anything from the packs besides the motor running alittle better. i got msd everything, kinda pricey but atleast its a good brand.

prodrifterx · July 13th, 2008, 01:40 PM

did the msd coil packs come with boot and electrode connector? (like the gms units)

September 10th, 2007, 03:02 PM	#1
ricks01 Regular Join Date: May 2007 Location: Colorado Posts: 256 iTrader: 2 reviews	coil packs Have you guys upgraded your coil packs on the 4.6 motor. The ones for sale at American Muscle say 15hp on n/a motors. I was curious as to weather or not they're worth the money. __________________ Some say he keeps a picture of his wallet in his wallet..

September 10th, 2007, 06:55 PM	#2
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	do not buy the gms ones, they work well for awhile but start making cars run like ass. if you must replace them, go with msd __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

July 6th, 2008, 07:09 AM	#9
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	i have no issues with my gms coils, nothing wrong with them. if there is to ba any issues gms will back them up and fix the issue. they are nice and help on idle and top end, especially with a power adder. there is no 15hp to gain with any coil replacement. if there is nothing wrong with yours, then dont worry about it. if you are just set on another set get the msd or gms. __________________ project warhorse under construction being built by MP2 Performance

Threads Similar to: coil packs
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket coil packs!!!	Grabber523	2005 - 2010	65	May 10th, 2010 04:37 PM
coil packs and wires	Ninjawafers!	V6 Mustangs	32	July 7th, 2008 04:17 AM
Ignition Coil Packs	blackhavok	2005 - 2010	5	December 5th, 2007 04:56 PM
2005-2007 Mustang GT 3V Coil Packs & Coil-on-Plug Connec	ozan169	2005 - 2010	4	February 7th, 2007 10:03 PM
Help with coil packs	99modular	99-04	2	July 23rd, 2006 10:09 PM

September 10th, 2007, 07:54 PM	#4
TheBusher Hardcore Enthusiast 2002 Chevrolet Impala ??? Join Date: Jul 2007 Location: Fort Collins, Colorado Posts: 2,242 iTrader: 0 reviews	Will these actually give the HP gains they say they do???

July 6th, 2008, 12:54 AM	#8
NOSXR Newbie Join Date: Jul 2008 Posts: 7 iTrader: 0 reviews	Hi there, I need to know if theres coil makers in the US that would make High output coils for the Australian XR6 Turbo engine. With the new XR6 turbo / F6 now the most powerfull Aussie built car to date, (dyno testing has shown this) we are in need of High output coils for the Aussie market. The strap length need for the Stainless conector is 80mm or 3.15 inches and the factory coil to be replaced is the Visteon F7TU-12A366BA. Theres a massive market here for this product as tuning these vehicles normally nets you over a 80 Hp gain with no other mods. Theres been 8 years of this engine here and theres another 2 years on the way before production is stopped. So the market is there to be had. The big Aussie V8 is now a yesterday car as more and more people look to the F6 310KW 560Nm monsters (true output is more like 340kw, but Ford Australia are still trying to sell the Boss V8 here and you can't have little brother shadowing the V8) Any way please help, Australian XR6 Turbo owners with this product. I have a 800Hp XR6 Turbo and spark is a real issue. NOSXR

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 03:55 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.