Bullitt heads/intake on npi

LXstang5.0 · October 16th, 2007, 10:56 PM

What do you guys know about swapping the heads and intake from a bullitt GT to a 96-98? Some people say theres a little modding but its a better hp gain than just pi swap. I know that Bullitt heads/intake would cost a little more but If its a better hp gain then im all for it. Or would i be better of doing a pi swap?..thanks

NMR-2vGT · October 16th, 2007, 11:20 PM

I believe the only difference is the bullitt intake. The Bullitt still has the PI heads so you would see maybe a 10 hp difference.

MustangMatt96GT · October 16th, 2007, 11:29 PM

the bullitt heads are just PIs, the intake is waht is different!

1BADSTANG · October 17th, 2007, 12:07 PM

Yeah do it .. you will notice the 10 horsepower difference on a dyno and you can say you have a "BULLITT INTAKE AND HEADS" hehe thats better than.. pi swap

LXstang5.0 · October 17th, 2007, 11:43 PM

are you guys being sarcastic? Was it really that dumb of a question? what If i asked what a cold air intake was? ive seen that question pop up before...

October 16th, 2007, 10:56 PM	#1
LXstang5.0 Regular Join Date: Sep 2007 Posts: 72	Bullitt heads/intake on npi What do you guys know about swapping the heads and intake from a bullitt GT to a 96-98? Some people say theres a little modding but its a better hp gain than just pi swap. I know that Bullitt heads/intake would cost a little more but If its a better hp gain then im all for it. Or would i be better of doing a pi swap?..thanks

October 16th, 2007, 11:29 PM	#3
MustangMatt96GT I Post Entirely Way Too Much 1996 Mustang GT 13.582@97.59 @ 5800 FT Join Date: Dec 2006 Location: Lakewood, CO Posts: 7,104	the bullitt heads are just PIs, the intake is waht is different! __________________ We expect shit to break, look foward to realizing exactly when it is happening, and than obsess about dropping plenty of cash to rebuild stronger, so we can try to run it hard as hell and break again. We are sick individuals.

October 17th, 2007, 12:07 PM	#4
1BADSTANG Hardcore Enthusiast Join Date: Sep 2007 Location: long island Posts: 1,497	Yeah do it .. you will notice the 10 horsepower difference on a dyno and you can say you have a "BULLITT INTAKE AND HEADS" hehe thats better than.. pi swap __________________ FREE DRAG RACER GAME, TRY IT!! http://www.StreetChallenge3D.com/sig...?referal=1BAD1 LOL @ THIS http://www.ihateyoujulia.com/?id=0a8...27aa2c6245e4c2

Threads Similar to: Bullitt heads/intake on npi
Thread	Thread Starter	Forum	Replies	Last Post
Bullitt Intake?	suds488	96-98	8	November 13th, 2007 01:57 PM
Anyone know anything about Bullitt Heads/intake swap?	LXstang5.0	96-98	15	October 26th, 2007 10:54 PM
ppl with a bullitt intake	DILO2001GT	99-04	4	July 17th, 2007 09:36 PM
WTB - Bullitt Intake Manifold	JohnnyZ	Want to Buy	6	March 25th, 2007 12:30 AM
bullitt intake	sonicblue	Want to Buy	5	January 20th, 2007 10:38 AM

October 16th, 2007, 11:20 PM	#2
NMR-2vGT Hardcore Enthusiast Join Date: Feb 2007 Location: Grand Island, Ne Posts: 1,489	I believe the only difference is the bullitt intake. The Bullitt still has the PI heads so you would see maybe a 10 hp difference.

October 17th, 2007, 11:43 PM	#5
LXstang5.0 Regular Join Date: Sep 2007 Posts: 72	are you guys being sarcastic? Was it really that dumb of a question? what If i asked what a cold air intake was? ive seen that question pop up before...

All times are GMT -4. The time now is 10:38 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.