Scan Guage

ricks01 · January 15th, 2008, 03:03 PM

I don't know if this is a repost but I had one of these when I was modding my Grand Prix. They have a lot of good information. It looks like they work with the 96-04 and 05-Present
Interceptor OBD2 data stream gauge and scan tool by Aeroforce Technology

94stang · January 17th, 2008, 01:33 PM

this is a repost here is the link

http://http://www.moddedmustangs.com...or-gauges.html

im thinking of getting 1 or 2 but im not quite sure yet idk enough about them, like setting warning lights for everything or just the rpm it would be sweet if you could have it go off for A/F, rpm. temp, boost oil press all at the same time

anyone know?

06WHTGT · January 18th, 2008, 04:07 PM

from what I read the duel setup might be a little slower because of competing for bus
time when in scan mode(2 gauges +ECU)not sure about the warning lights haven't set up
yet.Think its only one parameter for light

94stang · January 18th, 2008, 08:11 PM

you should try to find out that would be sick

or if you can find a pdf for the instructions i have been looking but no such luck

06WHTGT · January 19th, 2008, 06:08 PM

pdf is on aeroforce site. Go to Ford Tech at the bottom of page

94stang · January 19th, 2008, 10:12 PM

Originally Posted by 06WHTGT

pdf is on aeroforce site. Go to Ford Tech at the bottom of page

wow i feel stupid i was on the site when i asked

Technical Information

06WHTGT · January 23rd, 2008, 04:53 PM

Hey 94tang let us know what you decided to do.
Post some pic's of install too.Sorry for small pic, only one I have

Hawaiianbro · August 22nd, 2008, 04:54 PM

so....is this gauge a plug and play? curious will it work on a 2000 mustang gt?

Seems like something I would like to have and that I wouldnt have to put alot of gauges in the car.

If it works with my stang and I like it I may get an extra one as well so I can see more at once....question how would 2 work since it plugs into the obd2?

January 15th, 2008, 03:03 PM	#1
ricks01 Regular Join Date: May 2007 Location: Colorado Posts: 187	Scan Guage I don't know if this is a repost but I had one of these when I was modding my Grand Prix. They have a lot of good information. It looks like they work with the 96-04 and 05-Present Interceptor OBD2 data stream gauge and scan tool by Aeroforce Technology __________________ 01 GT, RIP!--2nd 01 GT SOLD--04 Mach 1

January 17th, 2008, 01:33 PM	#2
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 362	this is a repost here is the link http://http://www.moddedmustangs.com...or-gauges.html im thinking of getting 1 or 2 but im not quite sure yet idk enough about them, like setting warning lights for everything or just the rpm it would be sweet if you could have it go off for A/F, rpm. temp, boost oil press all at the same time anyone know? __________________ 2002 mustang gt 5speed, procharged...Fun PRO-M Blowthru Maf for 42lb with iat sensor! must go trade for LMAF!! 1999-2004 supercharger kit for sale. plus extras! check out my garage for details

January 18th, 2008, 04:07 PM	#3
06WHTGT Newbie Join Date: Nov 2007 Location: S Florida Posts: 46	from what I read the duel setup might be a little slower because of competing for bus time when in scan mode(2 gauges +ECU)not sure about the warning lights haven't set up yet.Think its only one parameter for light Last edited by 06WHTGT : January 18th, 2008 at 04:08 PM. Reason: wasn't finished

January 18th, 2008, 08:11 PM	#4
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 362	you should try to find out that would be sick or if you can find a pdf for the instructions i have been looking but no such luck __________________ 2002 mustang gt 5speed, procharged...Fun PRO-M Blowthru Maf for 42lb with iat sensor! must go trade for LMAF!! 1999-2004 supercharger kit for sale. plus extras! check out my garage for details

January 23rd, 2008, 04:53 PM	#7
06WHTGT Newbie Join Date: Nov 2007 Location: S Florida Posts: 46	Hey 94tang let us know what you decided to do. Post some pic's of install too.Sorry for small pic, only one I have Attached Thumbnails

January 19th, 2008, 06:08 PM	#5
06WHTGT Newbie Join Date: Nov 2007 Location: S Florida Posts: 46	pdf is on aeroforce site. Go to Ford Tech at the bottom of page

August 22nd, 2008, 04:54 PM	#8
Hawaiianbro Regular 2000 Mustang GT Join Date: Dec 2007 Location: Warren County Posts: 193	so....is this gauge a plug and play? curious will it work on a 2000 mustang gt? Seems like something I would like to have and that I wouldnt have to put alot of gauges in the car. If it works with my stang and I like it I may get an extra one as well so I can see more at once....question how would 2 work since it plugs into the obd2? __________________ B&M Short Shifter / Ford Heavy Duty Clutch / 3.73 gears / Nitto Drag Radials / Steeda CAI / Diablo Tuned / Mac LT Headers / Lethal Cated Xpipe / Pypes Exhaust / Stage1 Cam / Smoked headlights and Tail lights / Custom GT floor mats

Threads Similar to: Scan Guage
Thread	Thread Starter	Forum	Replies	Last Post
autometer guage help	91cobra5.0	5.0 Mustangs	2	January 17th, 2008 03:32 PM
guage	shamntgmry	99-04	7	August 27th, 2007 10:34 PM
new guage	HMUSN	Multimedia	9	April 26th, 2007 07:33 PM
Fuel guage stuck after white face guage install	r7r5	94-95	1	March 2nd, 2007 08:35 AM
A/F guage...	stangliter04	General Tech	9	August 8th, 2006 02:24 PM

All times are GMT -4. The time now is 05:55 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.